4,101 research outputs found
Graphical techniques to assist in pointing and control studies of orbiting spacecraft
Computer generated graphics are developed to assist in the modeling and assessment of pointing and control systems of orbiting spacecraft. Three-dimensional diagrams are constructed of the Earth and of geometrical models which resemble the spacecraft of interest. Orbital positioning of the spacecraft model relative to the Earth and the orbital ground track are then displayed. A star data base is also available which may be used for telescope pointing and star tracker field-of-views to visually assist in spacecraft pointing and control studies. A geometrical model of the Hubble Space Telescope (HST) is constructed and placed in Earth orbit to demonstrate the use of these programs. Simulated star patterns are then displayed corresponding to the primary mirror's FOV and the telescope's star trackers for various telescope orientations with respect to the celestial sphere
Weak tail conditions for local martingales
© Institute of Mathematical Statistics, 2019. The following conditions are necessary and jointly sufficient for an arbitrary cà dlà g local martingale to be a uniformly integrable martingale: (A) The weak tail of the supremum of its modulus is zero; (B) its jumps at the first-exit times from compact intervals converge to zero in L 1 on the events that those times are finite; and (C) its almost sure limit is an integrable random variable
Simulation of Cold Flow in a Truncated Ideal Nozzle with Film Cooling
Flow transients during rocket start-up and shut-down can lead to significant side loads on rocket nozzles. The capability to estimate these side loads computationally can streamline the nozzle design process. Towards this goal, the flow in a truncated ideal contour (TIC) nozzle has been simulated using RANS and URANS for a range of nozzle pressure ratios (NPRs) aimed to match a series of cold flow experiments performed at the NASA MSFC Nozzle Test Facility. These simulations were performed with varying turbulence model choices and for four approximations of the supersonic film injection geometry, each of which was created with a different simplification of the test article geometry. The results show that although a reasonable match to experiment can be obtained with varying levels of geometric fidelity, the modeling choices made do not fully represent the physics of flow separation in a TIC nozzle with film cooling
Quantifying electronic correlation strength in a complex oxide: a combined DMFT and ARPES study of LaNiO
The electronic correlation strength is a basic quantity that characterizes
the physical properties of materials such as transition metal oxides.
Determining correlation strengths requires both precise definitions and a
careful comparison between experiment and theory. In this paper we define the
correlation strength via the magnitude of the electron self-energy near the
Fermi level. For the case of LaNiO, we obtain both the experimental and
theoretical mass enhancements by considering high resolution
angle-resolved photoemission spectroscopy (ARPES) measurements and density
functional + dynamical mean field theory (DFT + DMFT) calculations. We use
valence-band photoemission data to constrain the free parameters in the theory,
and demonstrate a quantitative agreement between the experiment and theory when
both the realistic crystal structure and strong electronic correlations are
taken into account. These results provide a benchmark for the accuracy of the
DFT+DMFT theoretical approach, and can serve as a test case when considering
other complex materials. By establishing the level of accuracy of the theory,
this work also will enable better quantitative predictions when engineering new
emergent properties in nickelate heterostructures.Comment: 10 pages, 5 figure
Time-Frequency Analysis of Rocket Nozzle Wall Pressures During Start-up Transients
Surveys of the fluctuating wall pressure were conducted on a sub-scale, thrust- optimized parabolic nozzle in order to develop a physical intuition for its Fourier-azimuthal mode behavior during fixed and transient start-up conditions. These unsteady signatures are driven by shock wave turbulent boundary layer interactions which depend on the nozzle pressure ratio and nozzle geometry. The focus however, is on the degree of similarity between the spectral footprints of these modes obtained from transient start-ups as opposed to a sequence of fixed nozzle pressure ratio conditions. For the latter, statistically converged spectra are computed using conventional Fourier analyses techniques, whereas the former are investigated by way of time-frequency analysis. The findings suggest that at low nozzle pressure ratios -- where the flow resides in a Free Shock Separation state -- strong spectral similarities occur between fixed and transient conditions. Conversely, at higher nozzle pressure ratios -- where the flow resides in Restricted Shock Separation -- stark differences are observed between the fixed and transient conditions and depends greatly on the ramping rate of the transient period. And so, it appears that an understanding of the dynamics during transient start-up conditions cannot be furnished by a way of fixed flow analysis
Cold Flow Plume Entrainment Test Final Report NTF Test Number 2456
As part of the Space Shuttle Return to Flight (RTF) program, Marshall Space Flight Center (MSFC) performed computational fluid dynamics (CFD) analysis to define the velocity flowfields around the Shuttle stack at liftoff. These CFD predicted velocity flowfields were used in debris transport analysis (DTA). High speed flows such as plumes induce or 'entrain' mass from the surrounding environment. Previous work had shown that CFD analysis over-predicts plume induced flows. Therefore, the DTA would tend to 1) predict more debris impacts, and 2) the debris velocity (and kinetic energy) of those impacts would be too high. At a November, 2004 peer-review it was recommended that the Liftoff DTA team quantify the uncertainty in the DTA caused by the CFD's over prediction of plume induced flow. To do so, the Liftoff DTA team needed benchmark quality data for plume induced flow to quantify the CFD accuracy and its effect on the DTA. MSFC's Nozzle Test Facility (NTF) conducted the "Nozzle Induced Flows test, P#2456" to obtain experimental data for plume induced flows for nozzle flow exhausting into q quiescent freestream. Planning for the test began in December, 2004 and the experimental data was obtained in February and March of 2005. The funding for this test was provided by MSFC's Space Shuttle Propulsion Systems Integration and Engineering office
Characterisation of the new EpCAM-specific antibody HO-3: implications for trifunctional antibody immunotherapy of cancer
Epithelial cell adhesion molecule EpCAM is a transmembrane glycoprotein that is frequently overexpressed in a variety of carcinomas. This pan-carcinoma antigen has served as the target for a plethora of immunotherapies. Innovative therapeutic approaches include the use of trifunctional antibodies (trAbs) that recruit and activate different types of immune effector cells at the tumour site. The trAb catumaxomab has dual specificity for EpCAM and CD3. In patients with malignant ascites, catumaxomab significantly increased the paracentesis-free interval, corroborating the high efficacy of this therapeutic antibody. Here, we characterised the monoclonal antibody (mAb) HO-3, that is, the EpCAM-binding arm of catumaxomab. Peptide mapping indicated that HO-3 recognises a discontinuous epitope, having three binding sites in the extracellular region of EpCAM. Studies with glycosylation-deficient mutants showed that mAb HO-3 recognised EpCAM independently of its glycosylation status. High-affinity binding was not only detected for mAb HO-3, but also for the monovalent EpCAM-binding arm of catumaxomab with an excellent KD of 5.6 × 10−10 M. Furthermore, trAb catumaxomab was at least a 1000-fold more effective in eliciting the eradication of tumour cells by effector peripheral blood mononuclear cells compared with mAb HO-3. These findings suggest the great therapeutic potential of trAbs and clearly speak in favour of EpCAM-directed cancer immunotherapies
Interplay of Spin-Orbit Interactions, Dimensionality, and Octahedral Rotations in Semimetallic SrIrO
We employ reactive molecular-beam epitaxy to synthesize the metastable
perovskite SrIrO and utilize {\it in situ} angle-resolved photoemission
to reveal its electronic structure as an exotic narrow-band semimetal. We
discover remarkably narrow bands which originate from a confluence of strong
spin-orbit interactions, dimensionality, and both in- and out-of-plane IrO
octahedral rotations. The partial occupation of numerous bands with strongly
mixed orbital characters signals the breakdown of the single-band Mott picture
that characterizes its insulating two-dimensional counterpart,
SrIrO, illustrating the power of structure-property relations for
manipulating the subtle balance between spin-orbit interactions and
electron-electron interactions
Versuche zur strippingvoltammetrischen Bestimmung von Tc (VII) mit Hilfe einer mit einem Tetraphenylarsoniumchlorid-Derivat chemisch modifizierten Glaskohlenstoffelektrode
Computational Fluid Dynamics (CFD) applications in rocket propulsion analysis and design
Computational Fluid Dynamics (CFD) has been used in recent applications to affect subcomponent designs in liquid propulsion rocket engines. This paper elucidates three such applications for turbine stage, pump stage, and combustor chamber geometries. Details of these applications include the development of a high turning airfoil for a gas generator (GG) powered, liquid oxygen (LOX) turbopump, single-stage turbine using CFD as an integral part of the design process. CFD application to pump stage design has emphasized analysis of inducers, impellers, and diffuser/volute sections. Improvements in pump stage impeller discharge flow uniformity have been seen through CFD optimization on coarse grid models. In the area of combustor design, recent CFD analysis of a film cooled ablating combustion chamber has been used to quantify the interaction between film cooling rate, chamber wall contraction angle, and geometry and their effects of these quantities on local wall temperature. The results are currently guiding combustion chamber design and coolant flow rate for an upcoming subcomponent test. Critical aspects of successful integration of CFD into the design cycle includes a close-coupling of CFD and design organizations, quick turnaround of parametric analyses once a baseline CFD benchmark has been established, and the use of CFD methodology and approaches that address pertinent design issues. In this latter area, some problem details can be simplified while retaining key physical aspects to maintain analytical integrity
- …