48 research outputs found
On the Role of Education and Training as Drivers of Growth
The paper studies the contribution of human capital on economic growth through its impact on the rate of innovation by formulating an endogenous growth model that combines elements from Romer (1990), Aghion and Howitt (1992), and van Zon and Yetkiner (2003). Using a relatively broad concept of human capital that includes not only formal education but also on-the-job training, the article addresses two main issues. The first one is the optimum provision of firm-specific training necessary to be able to adopt and adapt to new technologies. The second one is the impact of both formal education and on-the-job training on the innovative capacity of an economic system that is the ultimate cause of output growth. In our set-up, general education enhances R&D activities and lowers adjustment costs to new technologies, thus facilitating their adoption, while on the other hand learning and firm-specific training ensure the possibility to implement the new coming technologies and reap all the related future profits. In the first part we assume that the adoption of a new technology consists of two periods, i.e. the learning phase during which newly hired workers acquire the right amount of know how in order to become familiar with the specific new technology, and a production phase in which profit flows arise for firms and in which the cost savings can be realized that arise from productivity increases in the learning phase. By expanding the training phase, entrepreneurs run a greater risk of shortening the production phase for a given arrival rate of new technologies that progressively erode the profit flows obtained from existing technologies. The paper shows first that it is possible to find an optimum, endogenously determined, amount of firm-specific training, that depends on the individuals’ speed in skills acquisition and educational attainment. Thus, a situation in which better educated workers may be disproportionately selected for training issues is possible, especially in times of rapid technological change. However, the paper also shows that an increase in the formal level of education can even result in a reduction of growth because of the increase in ‘technology absorption costs’ in terms of output foregone during re-training spells that arrive at a faster rate. In addition, the paper shows how to calculate the optimum endogenous taxation rate in order to cover the educational expenditures while ensuring the maximum growth rate of innovations. The results achieved finally offer some interesting hints from an education policy perspective.education, on-the-job training, human capital, endogenous growth, wear and tear effect
Influence of post-exercise hot-water therapy on long-term adaptations to training in elite short-track speed skaters
International audienceThis study aimed to investigate the effects of regular hot water bathing (HWB), undertaken 10 min after the last training session of the day, on chronic adaptations to training in elite athletes. Six short-track (ST) speed skaters completed four weeks of post-training HWB and four weeks of post-training passive recovery (PR) according to a randomized cross-over study. During HWB, participants sat in a jacuzzi (40 °C; 20 min). According to linear mixed models, maximal isometric strength of knee extensor muscles was significantly increased for training with HWB (p 0.05), including aerobic peak power output, the decline rate of jump height during 1 min-continuous maximal countermovement jumps (i.e. anaerobic capacity index), and the force-velocity relationship. Regarding specific tasks on ice, a small effect of training was found on both half-lap time and total time during a 1.5-lap all-out exercise (p = 0.0487; d = 0.23 and p = 0.0332; d = 0.21, respectively) but no additional effect of HWB was observed. In summary, the regular HWB protocol used in this study can induce additional effects on maximal isometric strength without compromising aerobic and anaerobic adaptations or field performance in these athletes
An Eclectic View on Numerical Methods for PDEs: Presentation of the Special Issue “Advanced Numerical Methods: Recent Developments, Analysis and Applications”
Graphene-doped photo-patternable ionogels: tuning of conductivity and mechanical stability of 3D microstructures
This work reports for the first time the development of enhanced conductivity, graphene- doped photo-patternable hybrid organic-inorganic ionogels and the effect of the subsequent materials condensation on the conductivity and mechanical stability of three- dimensional microstructures fabricated by multi-photon polymerisation (MPP). Ionogels were based on photocurable silicon/zirconium hybrid sol-gel materials and phosphonium (trihexyltetradecylphosphonium dicyanamide [P6,6,6,14][DCA] ionic liquid (IL). To optimise the dispersion of graphene within the ionogel matrices, aqueous solutions of graphene were prepared, as opposed to the conventional graphene powder approach, and employed as catalysts of hydrolysis and condensation reactions occurring in the sol-gel process.
Ionogels were prepared via a two step process by varying the hydrolysis degree from 25 to 50%, IL content between 0-50 w/w%, and the inorganic modifier (zirconate complex) concentration from 30 to 60 mol.% against the photocurable ormosil and they were characterised via Raman, Electrochemical Impedance Spectroscopy and Transmission Electron Microscopy. MPP was performed on the hybrid ionogels, resulting in three- dimensional microstructures that were characterised using scanning electron microscopy.
It is clearly demonstrated that the molecular formulation of the ionogels, including the concentration of graphene and the zirconate network modifier, play a critical role in the conductivity of the ionogels and influence the resulting mechanical stability of the fabricated three-dimensional microstructures. This work aims to establish for the first time the relationship between the molecular design and condensation of materials in the physico-chemistry and dynamic of ionogels
Photopatternable ionogels for electrochromic applications
This work describes the development of photopatternable ionogels based on a hybrid organic/inorganic sol–gel material and both phosphonium (trihexyltetradecylphosphonium dicyanamide [P6,6,6,14][dca],
trihexyltetradecylphosphonium bis(trifluoromethanesulfonyl)-amide [P6,6,6,14][NTf2]) and imidazolium (1-ethyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate [emIm][FAP]) room
temperature ionic liquids (RTILs).
Ionogels were prepared via a two step process with the RTIL
content varied between 40 and 80 w/w%, and characterised via Raman and Electrochemical Impedance Spectroscopy. 1 and 2 photon polymerisation was performed on the hybrid ionogels using photolithography, resulting in three dimensional structures that were characterised using scanning electron microscopy. Electrochromic ionogels were prepared by addition of ethyl viologen dibromide
(EV) to an ionogel containing [emIm][FAP] and hybrid sol–gel material. This composition was photopolymerised
on ITO electrodes by UV irradiation and subsequentially characterised via UV/Vis spectroelectrochemistry. It was also possible to fabricate a solid state electrochromic device based on EV and switch between the colourless (oxidised) and blue (reduced) forms using a perturbation signalof 1 V
Spatial Representations Are Specific to Different Domains of Knowledge
There is evidence that many abstract concepts are represented cognitively in a spatial format. However, it is unknown whether similar spatial processes are employed in different knowledge domains, or whether individuals exhibit similar spatial profiles within and across domains. This research investigated similarities in spatial representation in two knowledge domains – mathematics and music. Sixty-one adults completed analogous number magnitude and pitch discrimination tasks: the Spatial-Numerical Association of Response Codes and Spatial-Musical Association of Response Codes tasks. Subgroups of individuals with different response patterns were identified through cluster analyses. For both the mathematical and musical tasks, approximately half of the participants showed the expected spatial judgment effect when explicitly cued to focus on the spatial properties of the stimuli. Despite this, performances on the two tasks were largely independent. Consistent with previous research, the study provides evidence for the spatial representation of number and pitch in the majority of individuals. However, there was little evidence to support the claim that the same spatial representation processes underpin mathematical and musical judgments
Measurement and comparison of individual external doses of high-school students living in Japan, France, Poland and Belarus -- the "D-shuttle" project --
Twelve high schools in Japan (of which six are in Fukushima Prefecture), four
in France, eight in Poland and two in Belarus cooperated in the measurement and
comparison of individual external doses in 2014. In total 216 high-school
students and teachers participated in the study. Each participant wore an
electronic personal dosimeter "D-shuttle" for two weeks, and kept a journal of
his/her whereabouts and activities. The distributions of annual external doses
estimated for each region overlap with each other, demonstrating that the
personal external individual doses in locations where residence is currently
allowed in Fukushima Prefecture and in Belarus are well within the range of
estimated annual doses due to the background radiation level of other
regions/countries
Technical Design Report - TDR CYGNO-04/INITIUM
The aim of this Technical Design Report is to illustrate the technological choices foreseen to be implemented in the construction of the CYGNO-04 demonstrator, motivate them against the experiment physics goals of CYGNO-30 and demonstrate the financial sustainability of the project. CYGNO-04 represents PHASE 1 of the long term CYGNO roadmap, towards the development of large high precision tracking gaseous Time Projection Chamber (TPC) for directional Dark Matter searches and solar neutrino spectroscopy.
The CYGNO project1 peculiarities reside in the optical readout of the light produced during the amplification of the primary ionization electrons in a stack of triple Gas Electron Multipliers (GEMs), thanks to the nice scintillation properties of the chosen He:CF4 gas mixture. To this aim, CYGNO is exploiting the fast progress in commercial scientific Active Pixel Sensors (APS) development for highly performing sCMOS cameras, whose high granularity and sensitivity allow to significantly boost tracking, improve particle identification and lower the energy threshold. The X-Y track project obtained from the reconstruction of the sCMOS images is combined with a PMT measurement to obtain a full 3D track reconstruction.
In addition, several synergic R&Ds based on the CYGNO experimental approach are under development in the CYGNO collaboration (see Sec 2) to further enhance the light yield by means of electro luminescence after the amplification stage, to improve the tracking performances by exploiting negative ion drift operation within the INITIUM ERC Consolidator Grant, and to boost the sensitivity to O(GeV) Dark Matter masses by employing hydrogen rich target towards the development of PHASE 2 (see Sec. 1.2).
While still under optimization and subject to possible significant improvements, the CYGNO experimental approach performances and capabilities demonstrated so far with prototypes allow to foresee the development of an O(30) m3 experiment by 2026 for a cost of O(10) MEUROs. A CYGNO-30 experiment would be able to give a significant contribution to the search and study of Dark Matter with masses below 10 GeV/c2 for both SI and SD coupling. In case of a Dark Matter observation claim by other experiments, the information provided by a directional detector such as CYGNO would be fundamental to positively confirm the galactic origin of the allegedly detected Dark Matter signal. CYGNO-30 could furthermore provide the first directional measurement of solar neutrinos from the pp chain, possibly extending to lower energies the Borexino measurement2.
In order to reach this goal, the CYGNO project is proceeding through a staged approach. The PHASE 0 50 L detector (LIME, recently installed underground LNGS) will validate the full performances of the optical readout via APS commercial cameras and PMTs and the Montecarlo simulation of the expected backgrounds.
The full CYGNO-04 demonstrator will be realized with all the technological and material choices foreseen for CYGNO-30, to demonstrate the scalability of the experimental approach and the potentialities of the large PHASE 2 detector to reach the expected physics goals.
The first PHASE 1 design anticipated a 1 m3 active volume detector with two back-to-back TPCs with a central cathode and 500 mm drift length. Each 1 m2 readout area would have been composed by 9 + 9 readout modules having the LIME PHASE 0 dimensions and layout. Time (end of INITIUM project by March 2025) and current space availability at underground LNGS (only Hall F) forced the rescaling of the PHASE 1 active volume and design to a 0.4 m3, hence CYGNO-04. CYGNO-04 will keep the back-to-back double TPC layout with 500 mm drift length each, but with an 800 x 500 mm2 readout area covered by a 2 + 2 modules based on LIME design. The reduction of the detector volume has no impact on the technological objectives of PHASE 1, since the modular design with central cathode, detector materials and shieldings and auxiliary systems are independent of the total volume. The physics reach (which is a byproduct of PHASE 1 and NOT an explicit goal) will be only very partially reduced (less than a factor 2 overall) since a smaller detector volume implies also a reduced background from internal materials radioactivity. In addition, the cost reduction of CYGNO-04 of about 1⁄3 with respect to CYGNO-1 illustrated in the CDR effectively makes the overall project more financially sustainable (see CBS in the last section).
In summary this document will explain:
the physical motivation of the CYGNO project and the technical motivations of the downscale of the PHASE 1 to CYGNO-04, 400 liters of active volume, with respect to the demonstrator presented in the CDR;
the results of R&D and the Montecarlo expectations for PHASE 0;
the technical choices, procedures and the executive drawings of CYGNO-04 in the Hall F of the LNGS;
safety evaluations and the interference/request to the LNGS services;
Project management, WBS/WBC, WP, GANTT, ec
Applying systems thinking to identify enablers and challenges to scale-up interventions for hypertension and diabetes in low-income and middle-income countries: protocol for a longitudinal mixed-methods study.
INTRODUCTION: There is an urgent need to reduce the burden of non-communicable diseases (NCDs), particularly in low-and middle-income countries, where the greatest burden lies. Yet, there is little research concerning the specific issues involved in scaling up NCD interventions targeting low-resource settings. We propose to examine this gap in up to 27 collaborative projects, which were funded by the Global Alliance for Chronic Diseases (GACD) 2019 Scale Up Call, reflecting a total funding investment of approximately US$50 million. These projects represent diverse countries, contexts and adopt varied approaches and study designs to scale-up complex, evidence-based interventions to improve hypertension and diabetes outcomes. A systematic inquiry of these projects will provide necessary scientific insights into the enablers and challenges in the scale up of complex NCD interventions. METHODS AND ANALYSIS: We will apply systems thinking (a holistic approach to analyse the inter-relationship between constituent parts of scaleup interventions and the context in which the interventions are implemented) and adopt a longitudinal mixed-methods study design to explore the planning and early implementation phases of scale up projects. Data will be gathered at three time periods, namely, at planning (TP), initiation of implementation (T0) and 1-year postinitiation (T1). We will extract project-related data from secondary documents at TP and conduct multistakeholder qualitative interviews to gather data at T0 and T1. We will undertake descriptive statistical analysis of TP data and analyse T0 and T1 data using inductive thematic coding. The data extraction tool and interview guides were developed based on a literature review of scale-up frameworks. ETHICS AND DISSEMINATION: The current protocol was approved by the Monash University Human Research Ethics Committee (HREC number 23482). Informed consent will be obtained from all participants. The study findings will be disseminated through peer-reviewed publications and more broadly through the GACD network