Nassau grouper (Epinephelus striatus) spawning aggregations: hydroacoustic surveys and geostatistical analysis

With the near extinction of many spawning aggregations of large grouper and snapper throughout the Caribbean, Gulf of Mexico, and tropical Atlantic, we need to provide baselines for their conservation. Thus, there is a critical need to develop techniques for rapidly assessing the remaining known (and unknown) aggregations. To this end we used mobile hydroacoustic surveys to estimate the density, spatial extent, and total abundance of a Nassau grouper spawning aggregation at Little Cayman Island, Cayman Islands, BWI. Hydroacoustic estimates of abundance, density, and spatial extent were similar on two sampling occasions. The location and approximate spatial extent of the Nassau grouper spawning aggregation near the shelf-break was corroborated by diver visual observations. Hydroacoustic density estimates were, overall, three-times higher than the average density observed by divers; however, we note that in some instances diver-estimated densities in localized areas were similar to hydroacoustic density estimates. The resolution of the hydroacoustic transects and geostatistical interpolation may have resulted in over-estimates in fish abundance, but still provided reasonable estimates of total spatial extent of the aggregation. Limitations in bottom time for scuba and visibility resulted in poor coverage of the entire Nassau grouper aggregation and low estimates of abundance when compared to hydroacoustic estimates. Although the majority of fish in the aggregation were well off bottom, fish that were sometimes in close proximity to the seafloor were not detected by the hydroacoustic survey. We conclude that diver observations of fish spawning aggregations are critical to interpretations of hydroacoustic surveys, and that hydroacoustic surveys provide a more accurate estimate of overall fish abundance and spatial extent than diver observations. Thus, hydroacoustics is an emerging technology that, when coupled with diver observations, provides a comprehensive survey method for monitoring spawning aggregations of fish

A video method for quantifying size distribution, density, and three-dimensional spatial structure of reef fish spawning aggregations

There is a clear need to develop fisheries independent methods to quantify individual sizes, density, and three dimensional characteristics of reef fish spawning aggregations for use in population assessments and to provide critical baseline data on reproductive life history of exploited populations. We designed, constructed, calibrated, and applied an underwater stereo-video system to estimate individual sizes and three dimensional (3D) positions of Nassau grouper (Epinephelus striatus) at a spawning aggregation site located on a reef promontory on the western edge of Little Cayman Island, Cayman Islands, BWI, on 23 January 2003. The system consists of two free-running camcorders mounted on a meter-long bar and supported by a SCUBA diver. Paired video “stills” were captured, and nose and tail of individual fish observed in the field of view of both cameras were digitized using image analysis software. Conversion of these two dimensional screen coordinates to 3D coordinates was achieved through a matrix inversion algorithm and calibration data. Our estimate of mean total length (58.5 cm, n = 29) was in close agreement with estimated lengths from a hydroacoustic survey and from direct measures of fish size using visual census techniques. We discovered a possible bias in length measures using the video method, most likely arising from some fish orientations that were not perpendicular with respect to the optical axis of the camera system. We observed 40 individuals occupying a volume of 33.3 m3, resulting in a concentration of 1.2 individuals m–3 with a mean (SD) nearest neighbor distance of 70.0 (29.7) cm. We promote the use of roving diver stereo-videography as a method to assess the size distribution, density, and 3D spatial structure of fish spawning aggregations

Novel sputtering-technology for grain-size control

In this paper, we present a description of a novel high-rate plasma sputtering system that allows the control of grain size in sputtered films. Additionally, the system has the advantage of a better utilization of the target material (around 80% to 90%) by eliminating the race track at the target as in conventional plasma magnetron sputtering systems. The potential and capabilities of this novel plasma sputtering device are demonstrated in this paper by the deposition of a number of different Cr thin films suitable for underlayers in thin-film media and for which we have performed a systematic X-ray and TEM analysis to determine the grain-size histograms, mean grain diameters, and their relationship to the sputtering processes

A Study of Giant Pulses from PSR J1824-2452A

We have searched for microsecond bursts of emission from millisecond pulsars in the globular cluster M28 using the Parkes radio telescope. We detected a total of 27 giant pulses from the known emitter PSR J1824-2452A. At wavelengths around 20 cm the giant pulses are scatter-broadened to widths of around 2 microseconds and follow power-law statistics. The pulses occur in two narrow phase-windows which correlate in phase with X-ray emission and trail the peaks of the integrated radio pulse-components. Notably, the integrated radio emission at these phase windows has a steeper spectral index than other emission. The giant pulses exhibit a high degree of polarization, with many being 100% elliptically polarized. Their position angles appear random. Although the integrated emission of PSR J1824-2452A is relatively stable for the frequencies and bandwidths observed, the intensities of individual giant pulses vary considerably across our bands. Two pulses were detected at both 2700 and 3500 MHz. The narrower of the two pulses is 20 ns wide at 3500 MHz. At 2700 MHz this pulse has an inferred brightness temperature at maximum of 5 x 10^37 K. Our observations suggest the giant pulses of PSR J1824-2452A are generated in the same part of the magnetosphere as X-ray emission through a different emission process to that of ordinary pulses.Comment: Accepted by Ap

Hypermobility, developmental coordination disorder and physical activity in an Irish paediatric population

OBJECTIVE: The primary aim of the study was to explore the prevalence of generalized joint hypermobility (GJH) and generalized hypermobility spectrum disorder (gHSD) using the new classification system in a community paediatric physiotherapy service in Ireland. The second aim was to explore the relationship between GJH, gHSD and physical activity level, while considering the association of probable developmental coordination disorder (pDCD). METHODS: A case-controlled cross-sectional study of children aged 6-12 years, recruited from the community paediatric physiotherapy department (n = 32) and a local school (n = 41), was carried out. A Beighton score of ≥6/9 distinguished GJH. The new framework for hypermobility spectrum disorder (HSD) was used. Self-reported physical activity level was measured using the Physical Activity Questionnaire-Older Children. A parent-reported validated questionnaire screened for pDCD. RESULTS: The prevalence of GJH was 21.9% of children attending physiotherapy. One child in the physiotherapy group was identified as having gHSD, with a prevalence of 3.1%. There was no significant difference in physical activity level between children with and without GJH attending physiotherapy (independent samples t-test, p = 0.28). Probable developmental coordination disorder (pDCD) was observed in 71.9% of children attending physiotherapy. There was no significant difference in the number of children with pDCD in those with and without GJH (Fisher's exact test, p = 0.370). CONCLUSIONS: This study was the first to explore the prevalence of GJH and gHSD in the paediatric physiotherapy population in Ireland. The presence of GJH did not affect self-reported physical activity level or motor coordination in children attending physiotherapy

Metabolic determinants of body weight after cats were fed a low-carbohydrate high-protein diet or a high-carbohydrate low-protein diet ad libitum for 8wk

Overweight and obese conditions are common in cats and are associated with the development of a number of diseases. Knowledge of metabolic determinants and predictors of weight gain may enable better preventative strategies for obesity in cats. Lean, healthy cats were fed either a low-carbohydrate high-protein diet (n 16) or a high-carbohydrate low-protein (n 16) diet ad libitum for 8wk. Potential determinants and predictors of final body weight assessed were body fat and lean masses, energy required for maintenance, energy requirements above maintenance for each kilogram of weight gain, insulin sensitivity index, fasting, mean 24-h and peak plasma glucose, insulin, and leptin concentrations, and fasting and mean 24-h serum adiponectin concentrations. In cats fed the low-carbohydrate high-protein diet, after adjusting for initial body weight, those with higher energy requirements for weight gain and higher fasting glucose concentration had higher final body weights (P ≤ 0.01). Predicted final body weights using initial body weight, fasting glucose and mean 24-h insulin concentrations (partial R2 37.3%) were imprecise. An equation using just initial body weight and fasting glucose concentration would be of more practical value, but was marginally less precise. In cats fed the high-carbohydrate low-protein diet, those with lower fasting leptin concentration initially had higher final body weights (P = 0.01). Predicted final body weights using initial body weight, energy requirements for maintenance, total body fat percentage and fasting leptin concentration (partial R2 39.2%) were reasonably precise. Further studies are warranted to confirm these findings and to improve the precision of predicted final body weights

Direct glass bonded high specific power silicon solar cells for space applications

A lightweight, radiation hard, high performance, ultra-thin silicon solar cell is described that incorporates light trapping and a cover glass as an integral part of the device. The manufacturing feasibility of high specific power, radiation insensitive, thin silicon solar cells was demonstrated experimentally and with a model. Ultra-thin, light trapping structures were fabricated and the light trapping demonstrated experimentally. The design uses a micro-machined, grooved back surface to increase the optical path length by a factor of 20. This silicon solar cell will be highly tolerant to radiation because the base width is less than 25 microns making it insensitive to reduction in minority carrier lifetime. Since the silicon is bonded without silicone adhesives, this solar cell will also be insensitive to UV degradation. These solar cells are designed as a form, fit, and function replacement for existing state of the art silicon solar cells with the effect of simultaneously increasing specific power, power/area, and power supply life. Using a 3-mil thick cover glass and a 0.3 g/sq cm supporting Al honeycomb, a specific power for the solar cell plus cover glass and honeycomb of 80.2 W/Kg is projected. The development of this technology can result in a revolutionary improvement in high survivability silicon solar cell products for space with the potential to displace all existing solar cell technologies for single junction space applications

If cooperation is likely punish mildly: Insights from economic experiments based on the snowdrift game

Punishment may deter antisocial behavior. Yet to punish is costly, and the costs often do not offset the gains that are due to elevated levels of cooperation. However, the effectiveness of punishment depends not only on how costly it is, but also on the circumstances defining the social dilemma. Using the snowdrift game as the basis, we have conducted a series of economic experiments to determine whether severe punishment is more effective than mild punishment. We have observed that severe punishment is not necessarily more effective, even if the cost of punishment is identical in both cases. The benefits of severe punishment become evident only under extremely adverse conditions, when to cooperate is highly improbable in the absence of sanctions. If cooperation is likely, mild punishment is not less effective and leads to higher average payoffs, and is thus the much preferred alternative. Presented results suggest that the positive effects of punishment stem not only from imposed fines, but may also have a psychological background. Small fines can do wonders in motivating us to chose cooperation over defection, but without the paralyzing effect that may be brought about by large fines. The later should be utilized only when absolutely necessary.Comment: 15 pages, 6 figures; accepted for publication in PLoS ON