Symptoms of somatization as a rapid screening tool for mitochondrial dysfunction in depression

<p>Abstract</p> <p>Aims</p> <p>Somatic symptomatology is common in depression, and is often attributed to the Freudian-inspired concept of "somatization". While the same somatic symptoms and depression are common in mitochondrial disease, in cases with concurrent mood symptoms the diagnosis of a mitochondrial disorder and related therapy are typically delayed for many years. A short screening tool that can identify patients with depression at high risk for having underlying mitochondrial dysfunction is presented.</p> <p>Methods</p> <p>Six items of the Karolinska Scales of Personality (KSP) were found to differentiate among 21 chronically-depressed Swedish subjects with low versus normal muscle ATP production rates. A screening tool consisting of the six KSP questions was validated in the relatives of American genetics clinic patients, including in 24 matrilineal relatives in families with maternally inherited mitochondrial disease and in 30 control relatives.</p> <p>Results</p> <p>Among the depressed Swedish patients, the screening tool was positive in 13/14 with low and 1/7 with normal mitochondrial function (P = 0.0003). Applied to the American relatives of patients, the screening tool was positive in 13/24 matrilineal relatives and in 1/30 control relatives (P = 2 × 10^-5).</p> <p>Conclusion</p> <p>Our preliminary data suggest that a small number of specific somatic-related questions can be constructed into a valid screening tool for cases at high risk for having a component of energy metabolism in their pathogenesis.</p

The inverse-trans-influence in tetravalent lanthanide and actinide bis(carbene) complexes

Across the periodic table the trans-influence operates, whereby tightly bonded ligands selectively lengthen mutually trans metal–ligand bonds. Conversely, in high oxidation state actinide complexes the inverse-trans-influence operates, where normally cis strongly donating ligands instead reside trans and actually reinforce each other. However, because the inversetrans-influence is restricted to high-valent actinyls and a few uranium(V/VI) complexes, it has had limited scope in an area with few unifying rules. Here we report tetravalent cerium, uranium and thorium bis(carbene) complexes with trans C¼M¼C cores where experimental and theoretical data suggest the presence of an inverse-trans-influence. Studies of hypothetical praseodymium(IV) and terbium(IV) analogues suggest the inverse-trans-influence may extend to these ions but it also diminishes significantly as the 4f orbitals are populated. This work suggests that the inverse-trans-influence may occur beyond high oxidation state 5f metals and hence could encompass mid-range oxidation state actinides and lanthanides. Thus, the inverse-trans-influence might be a more general f-block principle

A Simple Approach for COnsumption and RElease (CORE) Analysis of Metabolic Activity in Single Mammalian Embryos

Non-invasive assay of the consumption and release of metabolites by individual human embryos could allow selection at the cleavage stage of development and facilitate Single Embryo Transfer in clinical IVF but will require simple, high throughput, sensitive methods applicable to small volume samples. A rapid, simple, non-invasive method has therefore been devised using a standard fluorescence plate reader, and used to measure the consumption of pyruvate and glucose, and release of lactate by single bovine embryos at all stages of preimplantation development in culture; amino acid profiles have been determined using HPLC. Early embryos with an ‘intermediate’ level (6.14±0.27 pmol/embryo/h) of pyruvate uptake were associated with the highest rate (68.3%) of blastocyst development indicating that a mid “optimum” range of pyruvate consumption correlates with high viability in this bovine model

Honey bee foraging distance depends on month and forage type

To investigate the distances at which honey bee foragers collect nectar and pollen, we analysed 5,484 decoded waggle dances made to natural forage sites to determine monthly foraging distance for each forage type. Firstly, we found significantly fewer overall dances made for pollen (16.8 %) than for non-pollen, presumably nectar (83.2 %; P < 2.2 × 10−23). When we analysed distance against month and forage type, there was a significant interaction between the two factors, which demonstrates that in some months, one forage type is collected at farther distances, but this would reverse in other months. Overall, these data suggest that distance, as a proxy for forage availability, is not significantly and consistently driven by need for one type of forage over the other

Extrapolation for Time-Series and Cross-Sectional Data

Extrapolation methods are reliable, objective, inexpensive, quick, and easily automated. As a result, they are widely used, especially for inventory and production forecasts, for operational planning for up to two years ahead, and for long-term forecasts in some situations, such as population forecasting. This paper provides principles for selecting and preparing data, making seasonal adjustments, extrapolating, assessing uncertainty, and identifying when to use extrapolation. The principles are based on received wisdom (i.e., experts’ commonly held opinions) and on empirical studies. Some of the more important principles are:• In selecting and preparing data, use all relevant data and adjust the data for important events that occurred in the past.• Make seasonal adjustments only when seasonal effects are expected and only if there is good evidence by which to measure them.• In extrapolating, use simple functional forms. Weight the most recent data heavily if there are small measurement errors, stable series, and short forecast horizons. Domain knowledge and forecasting expertise can help to select effective extrapolation procedures. When there is uncertainty, be conservative in forecasting trends. Update extrapolation models as new data are received.• To assess uncertainty, make empirical estimates to establish prediction intervals.• Use pure extrapolation when many forecasts are required, little is known about the situation, the situation is stable, and expert forecasts might be biased

Molecular and electronic structure of terminal and alkali metal-capped uranium(V) nitride complexes

Determining the electronic structure of actinide complexes is intrinsically challenging because inter-electronic repulsion, crystal field, and spin–orbit coupling effects can be of similar magnitude. Moreover, such efforts have been hampered by the lack of structurally analogous families of complexes to study. Here we report an improved method to U≡N triple bonds, and assemble a family of uranium(V) nitrides. Along with an isoelectronic oxo, we quantify the electronic structure of this 5f1 family by magnetometry, optical and electron paramagnetic resonance (EPR) spectroscopies and modelling. Thus, we define the relative importance of the spin–orbit and crystal field interactions, and explain the experimentally observed different ground states. We find optical absorption linewidths give a potential tool to identify spin–orbit coupled states, and show measurement of UV···UV super-exchange coupling in dimers by EPR. We show that observed slow magnetic relaxation occurs via two-phonon processes, with no obvious correlation to the crystal field

Relacao entre o nivel de atividade fisica estimado pelo Baltimore Activity Scale for Intermittent Claudication e a pedometria em pacientes com claudicacao intermitente

CONTEXTO: Os pacientes com claudicação intermitente apresentam níveis reduzidos de atividade física. A Baltimore Activity Scale for Intermittent Claudication (BASIC) foi validada para quantificar o nível de atividade física destes pacientes. No entanto, esta validação se baseou em apenas dois dias de monitoramento com acelerômetros, de modo que ainda permanece incerto se a BASIC fornece informações sobre os níveis de atividade física semanal. OBJETIVO: Analisar a correlação entre o nível de atividade física estimada pela BASIC e o nível obtido pelo pedômetro em uma semana, em pacientes com claudicação intermitente. MÉTODOS: Foram estudados 150 pacientes com claudicação intermitente, com idade entre 30 e 80 anos. Foram obtidos os dados sociodemográficos e verificada a presença de comorbidades e de fatores de risco cardiovascular, e a BASIC. O pedômetro foi utilizado por sete dias consecutivos, sendo a análise feita em três diferentes períodos de monitorização (todos os dias, dias da semana e do fim de semana). RESULTADOS: Foi observada correlação entre a BASIC e a média de passos de todos os dias (rho=0,343; p<0,001), dos dias de semana (rho=0,336; p<0,001) e dos dias do final de semana (rho=0,317; p<0,001). CONCLUSÃO: Em pacientes com claudicação intermitente, o nível de atividade física estimado pela BASIC se correlaciona com o nível de atividade física semanal

Infant and child feeding practices: a preliminary investigation

The document attached has been archived with permission from the Australian Dental Association. An external link to the publisher’s copy is included.The objective of this preliminary investigation was to examine the feeding practices of infants and pre-school children in Adelaide, and thereby contribute to the development of appropriate preventive dental strategies. A stratified random sample of 160 two year old and three year old pre-school children in the Adelaide Statistical District was obtained. Information about feeding practices and use of comforters or ‘dummies’ was obtained through a self-administered questionnaire completed by parents of the selected children. Information was collected for the age periods of 0–3 months, 4–6 months, 7–12 months, 13–24 months and 25–36 months. Most of the children (81.8 per cent) were breast-fed at some stage. However the percentage of children being breast-fed decreased markedly across age periods, particularly to 13–24 months, when only 15.9 per cent of children were being breast-fed. Over half of the children had been bottle-fed with infant formula at some stage. The highest percentage of children being bottle-fed with infant formula occurred in the 4–6 months (42.6 per cent) closely followed by the 7–12 months age period (37.4 per cent). Nearly two-thirds of children were bottle-fed with cow's milk at some stage. The highest percentage of children being bottle-fed with cow's milk occurred in the 13–24 months age period (49.6 per cent). A quarter (24.5 per cent) of the children were put to bed at some stage with a bottle containing cariogenic fluids. The majority of children used a ‘dummy’ at some stage during both day-time and night-time. Parents are in need of advice on appropriate feeding patterns for infants and young children.Amjad H. Wyne,A. John Spencer and Fearnley S. Szuste

Serum estradiol/progesterone ratio on day of embryo transfer may predict reproductive outcome following controlled ovarian hyperstimulation and in vitro fertilization

BACKGROUND: To determine whether estradiol-to-progesterone (E(2)/P) ratios at the time of embryo transfer (ET) have an effect on implantation and pregnancy in IVF cycles. METHODS: 239 women consecutively treated by IVF or ICSI were retrospectively analyzed and early luteal serum E(2 )and P were measured on the day of ET. Transfer occurred after a variable in vitro culture period ranging from 4–7 days after ovulation induction (OI). Following ET, serum E(2)/P ratios were calculated for clinical pregnancies, preclinical abortions and non-coneption cycles. RESULTS: Receiver-operator curve analysis demonstrated that the E(2)/P ratio could differentiate between clinical pregnancies and non-pregnant cycles (area under the curve on OI +4 days = 0.70; 95% CI = 0.60–0.80; p = 0.003, on OI +5 days = 0.76; 95% CI = 0.64–0.88; p = 0.001, OI +7 days = 0.85; 95% CI = 0.75–0.96; p < 0.0001). CONCLUSION: These retrospective data may hold prognostic value regarding endometrial receptivity as reflected by E(2)/P measurements and may help improve IVF treatment outcome. Further prospective studies should be undertaken to confirm these obersveration

Four-electron deoxygenative reductive coupling of carbon monoxide at a single metal site

Carbon dioxide is the ultimate source of the fossil fuels that are both central to modern life and problematic: their use increases atmospheric levels of greenhouse gases, and their availability is geopolitically constrained. Using carbon dioxide as a feedstock to produce synthetic fuels might, in principle, alleviate these concerns. Although many homogeneous and heterogeneous catalysts convert carbon dioxide to carbon monoxide, further deoxygenative coupling of carbon monoxide to generate useful multicarbon products is challenging. Molybdenum and vanadium nitrogenases are capable of converting carbon monoxide into hydrocarbons under mild conditions, using discrete electron and proton sources. Electrocatalytic reduction of carbon monoxide on copper catalysts also uses a combination of electrons and protons, while the industrial Fischer–Tropsch process uses dihydrogen as a combined source of electrons and electrophiles for carbon monoxide coupling at high temperatures and pressures6. However, these enzymatic and heterogeneous systems are difficult to probe mechanistically. Molecular catalysts have been studied extensively to investigate the elementary steps by which carbon monoxide is deoxygenated and coupled, but a single metal site that can efficiently induce the required scission of carbon–oxygen bonds and generate carbon–carbon bonds has not yet been documented. Here we describe a molybdenum compound, supported by a terphenyl–diphosphine ligand, that activates and cleaves the strong carbon–oxygen bond of carbon monoxide, enacts carbon–carbon coupling, and spontaneously dissociates the resulting fragment. This complex four-electron transformation is enabled by the terphenyl–diphosphine ligand, which acts as an electron reservoir and exhibits the coordinative flexibility needed to stabilize the different intermediates involved in the overall reaction sequence. We anticipate that these design elements might help in the development of efficient catalysts for converting carbon monoxide to chemical fuels, and should prove useful in the broader context of performing complex multi-electron transformations at a single metal site