Estimating fugitive bioaerosol releases from static compost windrows: feasibility of portable wind tunnel approach

An assessment of the fugitive release of bioaerosols from static compost piles was conducted at a green waste composting facility in South East England; this representing the initial stage of a programme of research into the influence of process parameters on bioaerosol emission flux. Wind tunnel experiments conducted on the surface of static windrows generated specific bioaerosol emission rates (SBER2s) at ground level of between 13 - 22 x10 3 cfu/m 2 /s for mesophilic actinomycetes and between 8 - 11 x10 3 cfu/m 2 /s for Aspergillus fumigatus. Air dispersion modelling of these emissions using the SCREEN3 air dispersion model in area source term mode was used to generate source depletion curves downwind of the facility for comparative purposes

Stochastic unraveling of Redfield master equations and its application to electron transfer problems

A method for stochastic unraveling of general time-local quantum master equations (QMEs) is proposed. The present kind of jump algorithm allows a numerically efficient treatment of QMEs which are not in Lindblad form, i.e. are not positive semidefinite by definition. The unraveling can be achieved by allowing for trajectories with negative weights. Such a property is necessary, e.g. to unravel the Redfield QME and to treat various related problems with high numerical efficiency. The method is successfully tested on the damped harmonic oscillator and on electron transfer models including one and two reaction coordinates. The obtained results are compared to those from a direct propagation of the reduced density matrix (RDM) as well as from the standard quantum jump method. Comparison of the numerical efficiency is performed considering both the population dynamics and the RDM in the Wigner phase space representation.Comment: accepted in J. Chem. Phys.; 26 pages, 6 figures; the order of authors' names on the title page correcte

Structural development of laminar flow control aircraft chordwise wing joint designs

For laminar flow to be achieved, any protuberances on the surface must be small enough to avoid transition to turbulent flow. However, the surface must have joints between the structural components to allow assembly or replacement of damaged parts, although large continuous surfaces can be utilized to minimize the number the number of joints. Aircraft structural joints usually have many countersunk bolts or rivets on the outer surface. To maintain no mismatch on outer surfaces, it is desirable to attach the components from the inner surface. It is also desirable for the panels to be interchangeable, without the need for shims at the joint, to avoid surface discontinuities that could cause turbulence. Fabricating components while pressing their outer surfaces against an accurate mold helps to ensure surface smoothness and continuity at joints. These items were considered in evaluating the advantages and disadvantages of the joint design concepts. After evaluating six design concepts, two of the leading candidates were fabricated and tested using many small test panels. One joint concept was also built and tested using large panels. The small and large test panel deflections for the leading candidate designs at load factors up to +1.5 g's were well within the step and waviness requirements for avoiding transition.The small panels were designed and tested for compression and tension at -65 F, at ambient conditions, and at 160 F. The small panel results for the three-rib and the sliding-joint concepts indicated that they were both acceptable. The three-rib concept, with tapered splice plates, was considered to be the most practical. A modified three-rib joint that combined the best attributes of previous candidates was designed, developed, and tested. This improved joint met all of the structural strength, surface smoothness, and waviness criteria for laminar flow control (LFC). The design eliminated all disadvantages of the initial three-rib concept except for unavoidable eccentricity, which was reduced and reacted satisfactorily by the rib supports. It should also result in a relatively simple low-cost installation, and makes it easy to replace any panels damaged in the field

End states, ladder compounds, and domain wall fermions

A magnetic field applied to a cross linked ladder compound can generate isolated electronic states bound to the ends of the chain. After exploring the interference phenomena responsible, I discuss a connection to the domain wall approach to chiral fermions in lattice gauge theory. The robust nature of the states under small variations of the bond strengths is tied to chiral symmetry and the multiplicative renormalization of fermion masses.Comment: 10 pages, 4 figures; final version for Phys. Rev. Let

Audio Features Affected by Music Expressiveness

Within a Music Information Retrieval perspective, the goal of the study presented here is to investigate the impact on sound features of the musician's affective intention, namely when trying to intentionally convey emotional contents via expressiveness. A preliminary experiment has been performed involving $10$ tuba players. The recordings have been analysed by extracting a variety of features, which have been subsequently evaluated by combining both classic and machine learning statistical techniques. Results are reported and discussed.Comment: Submitted to ACM SIGIR Conference on Research and Development in Information Retrieval (SIGIR 2016), Pisa, Italy, July 17-21, 201

A School Perspective on School-Embedded Initial Teacher Education

School-university partnerships have been developed to invigorate initial teacher education (ITE). Such partnerships potentially offer rich educational opportunities to pre-service teachers. This paper examines integrated and school-embedded approaches to ITE in the Australian context, drawing on a case study analysis of a three-year, ITE school-university-system partnership named inSITE. inSITE is explored from the perspective of the school educators directly involved in its design and delivery. Complexity science provided the theoretical framework for inSITE and signalled its principles of holism, integration and reflective practice. The factors that contributed to and inhibited school-based initial teacher education from a school’s perspective are identified. The paper concludes that, given conducive conditions, an integrated, embedded and reflective approach can address the prevailing theory-practice dualism of ITE and may offer an important third way to prepare new teachers. The challenges and opportunities for school-embedded ITE in Australia are highlighted

Teaching introductory undergraduate Physics using commercial video games

Commercial video games are increasingly using sophisticated physics simulations to create a more immersive experience for players. This also makes them a powerful tool for engaging students in learning physics. We provide some examples to show how commercial off-the-shelf games can be used to teach specific topics in introductory undergraduate physics. The examples are selected from a course taught predominantly through the medium of commercial video games.Comment: Accepted to Physics Education, Fig1 does not render properly in this versio

Rivaroxaban for Preventing Atherothrombotic Events in People with Acute Coronary Syndrome and Elevated Cardiac Biomarkers: An Evidence Review Group Perspective of a NICE Single Technology Appraisal.

As part of its Single Technology Appraisal process, the National Institute for Health and Care Excellence (NICE) invited the company that manufactures rivaroxaban (Xarelto, Bayer) to submit evidence of the clinical and cost effectiveness of rivaroxaban for the prevention of adverse outcomes in patients after the acute management of acute coronary syndrome (ACS). The School of Health and Related Research Technology Appraisal Group at the University of Sheffield was commissioned to act as the independent Evidence Review Group (ERG). The ERG produced a critical review of the evidence for the clinical and cost effectiveness of the technology, based upon the company's submission to NICE. The evidence was derived mainly from a randomised, double-blind, phase III, placebo-controlled trial of rivaroxaban (either 2.5 or 5 mg twice daily) in patients with recent ACS [unstable angina, non-ST segment elevation myocardial infarction (NSTEMI) or ST segment elevation myocardial infarction (STEMI)]. In addition, all patients received antiplatelet therapy [aspirin alone or aspirin and a thienopyridine either as clopidogrel (approximately 99 %) or ticlopidine (approximately 1 %) according to national or local guidelines]. The higher dose of rivaroxaban (5 mg twice daily) did not form part of the marketing authorisation. A post hoc subgroup analysis of the licensed patients who had ACS with elevated cardiac biomarkers (that is, patients with STEMI and NSTEMI) without prior stroke or transient ischaemic stroke showed that compared with standard care, the addition of rivaroxaban (2.5 mg twice daily) to existing antiplatelet therapy reduced the composite endpoint of cardiovascular mortality, myocardial infarction or stroke, but increased the risk of major bleeding and intracranial haemorrhage. However, there were a number of limitations in the evidence base that warrant caution in its interpretation. In particular, the evidence may be confounded because of the post hoc subgroup analysis, modified intention-to-treat analyses, high dropout rates and missing vital status data. Results from the company's economic evaluation showed that the deterministic incremental cost-effectiveness ratio (ICER) for rivaroxaban in combination with aspirin plus clopidogrel or with aspirin alone compared with aspirin plus clopidogrel or aspirin alone was £6203 per quality-adjusted life-year (QALY) gained. In contrast, the ERG's preferred base case estimate was £5622 per QALY gained. The ICER did not rise above £10,000 per QALY gained in any of the sensitivity analyses undertaken by the ERG, although the inflexibility of the company's economic model precluded the ERG from formally undertaking all desired exploratory analyses. As such, only a crude exploration of the impact of additional bleeding events could be undertaken. The NICE Appraisal Committee concluded that the ICERs presented were all within the range that could be considered cost effective and that the results of the ERG's exploratory sensitivity and scenario analyses suggested that the ICER was unlikely to increase to the extent that it would become unacceptable. The Appraisal Committee therefore concluded that rivaroxaban in combination with aspirin plus clopidogrel, or with aspirin alone, was a cost-effective use of National Health Service (NHS) resources for preventing atherothrombotic events in people with ACS and elevated cardiac biomarkers

Sensitivity of predicted bioaerosol exposure from open windrow composting facilities to ADMS dispersion model parameters

Bioaerosols are released in elevated quantities from composting facilities and are associated with negative health effects, although dose-response relationships are not well understood, and require improved exposure classification. Dispersion modelling has great potential to improve exposure classification, but has not yet been extensively used or validated in this context. We present a sensitivity analysis of the ADMS dispersion model specific to input parameter ranges relevant to bioaerosol emissions from open windrow composting. This analysis provides an aid for model calibration by prioritising parameter adjustment and targeting independent parameter estimation. Results showed that predicted exposure was most sensitive to the wet and dry deposition modules and the majority of parameters relating to emission source characteristics, including pollutant emission velocity, source geometry and source height. This research improves understanding of the accuracy of model input data required to provide more reliable exposure predictions

Coupling biochemistry and mechanics in cell adhesion: a model for inhomogeneous stress fiber contraction

Biochemistry and mechanics are closely coupled in cell adhesion. At sites of cell-matrix adhesion, mechanical force triggers signaling through the Rho-pathway, which leads to structural reinforcement and increased contractility in the actin cytoskeleton. The resulting force acts back to the sites of adhesion, resulting in a positive feedback loop for mature adhesion. Here we model this biochemical-mechanical feedback loop for the special case when the actin cytoskeleton is organized in stress fibers, which are contractile bundles of actin filaments. Activation of myosin II molecular motors through the Rho-pathway is described by a system of reaction-diffusion equations, which are coupled into a viscoelastic model for a contractile actin bundle. We find strong spatial gradients in the activation of contractility and in the corresponding deformation pattern of the stress fiber, in good agreement with experimental findings.Comment: Revtex, 35 pages, 13 Postscript figures included, in press with New Journal of Physics, Special Issue on The Physics of the Cytoskeleto