1,934 research outputs found
Manipulation of a Bose-Einstein condensate by a time-averaged orbiting potential using phase jumps of the rotating field
We report on the manipulation of the center-of-mass motion (`sloshing') of a
Bose Einstein condensate in a time-averaged orbiting potential (TOP) trap. We
start with a condensate at rest in the center of a static trapping potential.
When suddenly replacing the static trap with a TOP trap centered about the same
position, the condensate starts to slosh with an amplitude much larger than the
TOP micromotion. We show, both theoretically and experimentally, that the
direction of sloshing is related to the initial phase of the rotating magnetic
field of the TOP. We show further that the sloshing can be quenched by applying
a carefully timed and sized jump in the phase of the rotating field.Comment: 11 pages, 9 figure
An experimental documentation of trailing-edge flows at high Reynolds number
Experiments documenting attached trailing-edge and near-wake flows at high Reynolds numbers are described. A long, airfoil-like model was tested at subsonic and low transonic Mach numbers, and both symmetrical and asymmetrical flows with pressure gradients upstream of the trailing edge were investigated. Model surface pressures and detailed mean and turbulence flow qualities were measured in the vicinity of the trailing edge and in the near-wake. The data obtained are of sufficient quality and detail to be useful as test cases in assessing turbulence models and calculation methods
Modelling Stress Wave Propagation and Triaxial Compression Test using Smoothed Particle Hydrodynamics
Smoothed Particle Hydrodynamics (SPH) is used to model stress wave propagation and compression tests in elastic solids under triaxial loading conditions. It builds on our previous studies of deformation of elastic solids under uniaxial and biaxial loading. A laboratory scale triaxial compression test is used to demonstrate the generation, propagation and reflection of the elastic waves in the specimen. To verify the SPH based approach, the results are compared to matching results using the Finite Element Method (FEM). The solutions predicted by SPH are found to agree well. This paper illustrates the potential of SPH for accurate modelling of solid materials that are subjected to triaxial compression, and of the resulting elastic wave propagation
Modelling Plastic Deformation and Thermal Response in Welding using Smoothed Particle Hydrodynamics
An approach for modelling plastic deformation and thermal response in a weld pool using the mesh-free Smoothed Particle Hydrodynamics (SPH) method is developed. The proposed modelling technique is illustrated by simulating a simple setup of an arc welding process. The plastic deformation and temperature distribution in the weld pool and the surrounding parent material are analysed using SPH. This work establishes the capability of SPH in gaining insight into the material deposition and its subsequent evolution, and predicting plastic deformation and heat transfer in welding processes. This can then be used to evaluate the generation of thermal stresses and the change in mechanical and metallurgical properties in the weld pool and the adjacent Heat Affected Zone (HAZ)
Towards a virtual comminution machine
Towards the end of the 1990s readily available personal computers became sufficiently powerful - when combined with an efficient numerical code - to use discrete element modelling (DEM) in two dimensions for models involving a few hundred to a few thousand particles in commercially available packages. Some proprietary codes reported up to 200,000 particles [Herbst, J.A., Nordell, L., 2001. Optimization of the design of sag mill internals using high fidelity simulation. In: Vancouver, B.C., Barratt, D.J., Allan, M.J., Mular, A.L. (Eds.), Proceedings of the SAG Conference, University of British Columbia, IV, 150-164; Cleary, P.W., 2001a. Charge behaviour and power consumption in ball mills: Sensitivity to mill operating conditions, liner geometry and charge composition. Int. J. Min. Process. 63, 79-114 and Cleary, P.W., 2001b. Recent advances in DEM modelling of tumbling mills. Minerals Eng. 14, 1295-1319]. In early 2000, JKMRC and CSIRO-MIS agreed to an informal collaboration with the objective of testing various DEM approaches against detailed process measurements. The initial collaboration demonstrated that 3D-DEM using spheres was sufficiently realistic for flow patterns and power estimation within tumbling mills. The results were reported in papers which were presented at SAG 2001 and in the technical literature [Morrison, R.D., Cleary, P.W., Valery, W., 2001. Comparing power and performance trends from DEM and JK modelling. SAG 2001, Department of Mining and Minerals Process Engineering. University of British Columbia, Vancouver, 284-300; Cleary, P.W., Morrison, R., Morrell, S., 2003. Comparison of DEM and experiment for a scale model SAG mill. Int. J. Min. Process. 68, 129-165]. The commencement of the CRC for Sustainable Resource Processing in 2003 provided an opportunity to formalize the collaboration and bring increased resources to bear. The objective of this collaboration is to develop a virtual comminution machine (VCM). The VCM will allow a comminution machine design which exists as a suitably detailed design in a 3D Computer aided design file (CAD) to simulate processing an ore (which has been characterised by suitable test work) to predict progeny, power consumption, wear and even machine component loadings. This paper reports on the substantial progress made to date towards a practical Virtual Comminution Machine
Investigating the relationships between peristaltic contraction and fluid transport in the human colon using Smoothed Particle Hydrodynamics
© 2012. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/Complex relationships exist between gut contractility and the flow of digesta. We propose here a Smoothed Particle Hydrodynamics model coupling the flow of luminal content and wall flexure to help investigate these relationships. The model indicates that a zone of muscular relaxation preceding the contraction is an important element for transport. Low pressures in this zone generate positive thrust for low viscosity content. The viscosity of luminal content controls the localization of the flow and the magnitude of the radial pressure gradient and together with contraction amplitude they control the transport rate. For high viscosity content, high lumen occlusion is required for effective propulsion
The Leiden/Argentine/Bonn (LAB) Survey of Galactic HI: Final data release of the combined LDS and IAR surveys with improved stray-radiation corrections
We present the final data release of observations of lambda 21-cm emission
from Galactic neutral hydrogen over the entire sky, merging the
Leiden/Dwingeloo Survey (LDS: Hartmann & Burton, 1997) of the sky north of
delta = -30 deg with the Instituto Argentino de Radioastronomia Survey (IAR:
Arnal et al., 2000, and Bajaja et al., 2005) of the sky south of delta = -25
deg. The angular resolution of the combined material is HPBW ~ 0.6 deg. The LSR
velocity coverage spans the interval -450 km/s to +400 km/s, at a resolution of
1.3 km/s. The data were corrected for stray radiation at the Institute for
Radioastronomy of the University of Bonn, refining the original correction
applied to the LDS. The rms brightness-temperature noise of the merged database
is 0.07 - 0.09 K. Residual errors in the profile wings due to defects in the
correction for stray radiation are for most of the data below a level of 20 -
40 mK. It would be necessary to construct a telescope with a main beam
efficiency of eta_{MB} > 99% to achieve the same accuracy. The merged and
refined material entering the LAB Survey of Galactic HI is intended to be a
general resource useful to a wide range of studies of the physical and
structural characteristices of the Galactic interstellar environment. The LAB
Survey is the most sensitive Milky Way HI survey to date, with the most
extensive coverage both spatially and kinematically.Comment: 9 pages, 5 figures, accepted for publication by Astronomy &
Astrophysic
Spatial prediction of malaria prevalence in Papua New Guinea: a comparison of Bayesian decision network and multivariate regression modelling approaches for improved accuracy in prevalence prediction
BACKGROUND: Considerable progress towards controlling malaria has been made in Papua New Guinea through the national malaria control programme's free distribution of long-lasting insecticidal nets, improved diagnosis with rapid diagnostic tests and improved access to artemisinin combination therapy. Predictive prevalence maps can help to inform targeted interventions and monitor changes in malaria epidemiology over time as control efforts continue. This study aims to compare the predictive performance of prevalence maps generated using Bayesian decision network (BDN) models and multilevel logistic regression models (a type of generalized linear model, GLM) in terms of malaria spatial risk prediction accuracy. METHODS: Multilevel logistic regression models and BDN models were developed using 2010/2011 malaria prevalence survey data collected from 77 randomly selected villages to determine associations of Plasmodium falciparum and Plasmodium vivax prevalence with precipitation, temperature, elevation, slope (terrain aspect), enhanced vegetation index and distance to the coast. Predictive performance of multilevel logistic regression and BDN models were compared by cross-validation methods. RESULTS: Prevalence of P. falciparum, based on results obtained from GLMs was significantly associated with precipitation during the 3 driest months of the year, June to August (β = 0.015; 95% CI = 0.01-0.03), whereas P. vivax infection was associated with elevation (β = - 0.26; 95% CI = - 0.38 to - 3.04), precipitation during the 3 driest months of the year (β = 0.01; 95% CI = - 0.01-0.02) and slope (β = 0.12; 95% CI = 0.05-0.19). Compared with GLM model performance, BDNs showed improved accuracy in prediction of the prevalence of P. falciparum (AUC = 0.49 versus 0.75, respectively) and P. vivax (AUC = 0.56 versus 0.74, respectively) on cross-validation. CONCLUSIONS: BDNs provide a more flexible modelling framework than GLMs and may have a better predictive performance when developing malaria prevalence maps due to the multiple interacting factors that drive malaria prevalence in different geographical areas. When developing malaria prevalence maps, BDNs may be particularly useful in predicting prevalence where spatial variation in climate and environmental drivers of malaria transmission exists, as is the case in Papua New Guinea
Mixed-state quasiparticle transport in high-T_c cuprates: localization by magnetic field
Theory of quasiparticle transport in the mixed state of a d-wave
superconductor is developed under the assumption of disordered vortex array. A
novel universal regime is identified at fields above H*= c*H_{c2}(T/T_c)^2,
characterized by a field-independent longitudinal thermal conductivity. It is
argued that this behavior is responsible for the high-field plateau in the
thermal conductivity experimentally observed in cuprates by Krishana, Ong and
co-workers.Comment: 4 pages REVTeX + 1 PostScript figure. Final version to appear in PRL.
Several changes in response to referee comments. For related work and info
visit http://www.pha.jhu.edu/~fran
9.7 um Silicate Features in AGNs: New Insights into Unification Models
We describe observations of 9.7 um silicate features in 97 AGNs, exhibiting a
wide range of AGN types and of X-ray extinction toward the central nuclei. We
find that the strength of the silicate feature correlates with the HI column
density estimated from fitting the X-ray data, such that low HI columns
correspond to silicate emission while high columns correspond to silicate
absorption. The behavior is generally consistent with unification models where
the large diversity in AGN properties is caused by viewing-angle-dependent
obscuration of the nucleus. Radio-loud AGNs and radio-quiet quasars follow
roughly the correlation between HI columns and the strength of the silicate
feature defined by Seyfert galaxies. The agreement among AGN types suggests a
high-level unification with similar characteristics for the structure of the
obscuring material. We demonstrate the implications for unification models
qualitatively with a conceptual disk model. The model includes an inner
accretion disk (< 0.1 pc in radius), a middle disk (0.1-10 pc in radius) with a
dense diffuse component and with embedded denser clouds, and an outer clumpy
disk (10-300 pc in radius).Comment: Accepted for publication in ApJ, 14 pages, 5 figures. The on-line
table is available at http://cztsy.as.arizona.edu/~yong/silicate_tab1.pd
- …