Comments on Sweeny and Gliozzi dynamics for simulations of Potts models in the Fortuin-Kasteleyn representation

We compare the correlation times of the Sweeny and Gliozzi dynamics for two-dimensional Ising and three-state Potts models, and the three-dimensional Ising model for the simulations in the percolation prepresentation. The results are also compared with Swendsen-Wang and Wolff cluster dynamics. It is found that Sweeny and Gliozzi dynamics have essentially the same dynamical critical behavior. Contrary to Gliozzi's claim (cond-mat/0201285), the Gliozzi dynamics has critical slowing down comparable to that of other cluster methods. For the two-dimensional Ising model, both Sweeny and Gliozzi dynamics give good fits to logarithmic size dependences; for two-dimensional three-state Potts model, their dynamical critical exponent z is 0.49(1); the three-dimensional Ising model has z = 0.37(2).Comment: RevTeX, 4 pages, 5 figure

Surgical Decision Making for Unstable Thoracolumbar Spine Injuries: Results of a Consensus Panel Review by the Spine Trauma Study Group

Objectives: The optimal surgical approach and treatment of unstable thoracolumbar spine injuries are poorly defined owing to a lack of widely accepted level I clinical literature. This lack of evidence based standards has led to varied practice patterns based on individual surgeon preferences. The purpose of this study was to survey the leaders in the field of spine trauma to define the major characteristics of thoracolumbar injuries that influence their surgical decision making. In the absence of good scientific data, expert consensus opinions may provide surgeons with a practical framework to guide therapy and to conduct future research. Methods: A panel of 22 leading spinal surgeons from 20 level I trauma centers in seven countries met to discuss the indications for surgical approach selection in unstable thoracolumbar injuries. Injuries were presented to the surgeons in a case scenario survey format. Preferred surgical approaches to the clinical scenarios were tabulated and comments weighed. Results: All members of the panel agreed that three independent characteristics of thoracolumbar injuries carry primary importance in surgical decision making: the injury morphology, the neurologic status of the patient, and the integrity of the posterior ligaments. Six clinical scenarios based on the neurologic status of the patient (intact, incomplete, or complete) and on the status of the posterior ligamentous complex (intact or disrupted) were created, and consensus treatment approaches were described. Additional circumstances capable of altering the treatments were acknowledged. Conclusions: Decision making for the surgical treatment of thoracolumbar injuries is largely dependent on three patient characteristics: injury morphology, neurologic status, and posterior ligament integrity. A logical and practical decision-making process based on these characteristics may guide treatment even for the most complicated fracture patterns

Characteristics of Patients Who Survived < 3 Months or > 2 Years After Surgery for Spinal Metastases: Can We Avoid Inappropriate Patient Selection?

PURPOSE: Survival after metastatic cancer has improved at the cost of increased presentation with metastatic spinal disease. For patients with pathologic spinal fractures and/or spinal cord compression, surgical intervention may relieve pain and improve quality of life. Surgery is generally considered to be inappropriate if anticipated survival is < 3 months. The aim of this international multicenter study was to analyze data from patients who died within 3 months or 2 years after surgery, to identify preoperative factors associated with poor or good survival, and to avoid inappropriate selection of patients for surgery in the future. PATIENTS AND METHODS: A total of 1,266 patients underwent surgery for impending pathologic fractures and/or neurologic deficits and were prospectively observed. Data collected included tumor characteristics, preoperative fitness (American Society of Anesthesiologists advisory [ASA]), neurologic status (Frankel scale), performance (Karnofsky performance score [KPS]), and quality of life (EuroQol five-dimensions questionnaire [EQ-5D]). Outcomes were survival at 3 months and 2 years postsurgery. Univariable and multivariable logistic regression analyses were used to find preoperative factors associated with short-term and long-term survival. RESULTS: In univariable analysis, age, emergency surgery, KPS, EQ-5D, ASA, Frankel, and Tokuhashi/Tomita scores were significantly associated with short survival. In multivariable analysis, KPS and age were significantly associated with short survival (odds ratio [OR], 1.36; 95% CI, 1.15 to 1.62; and OR, 1.14; 95% CI, 1.02 to 1.27, respectively). Associated with longer survival in univariable analysis were age, number of levels included in surgery, KPS, EQ-5D, Frankel, and Tokuhashi/Tomita scores. In multivariable analysis, the number of levels included in surgery (OR, 1.21; 95% CI, 1.06 to 1.38) and primary tumor type were significantly associated with longer survival. CONCLUSION: Poor performance status at presentation is the strongest indicator of poor short-term survival, whereas low disease load and favorable tumor histology are associated with longer-term survival

Biodegradable microparticulate drug delivery system of diltiazem HCl

The efficacy of a drug in a specific application requires the maintenance of appropriate drug blood level concentration during a prolonged period of time. Controlled release delivery is available for many routes of administration and offers many advantages (as microparticles and nanoparticles) over immediate release delivery. These advantages include reduced dosing frequency, better therapeutic control, fewer side effects, and, consequently, these dosage forms are well accepted by patients. Advances in polymer material science, particle engineering design, manufacture, and nanotechnology have led the way to the introduction of several marketed controlled release products and several more are in pre-clinical and clinical development. The objective of this work is to prepare and evaluate diltiazem HCl loaded albumin microparticles using a factorial design. Albumin (natural polymer) microparticles were prepared by emulsion heat-stabilization method. Selected formulations were characterized for their entrapment efficiency, particle size, surface morphology, and release behavior. Analysis of variance for entrapment efficiency indicates that entrapment efficiency is best fitted to a response surface linear model. Surface morphology was studied by scanning electron microscopy. Scanning electron microscopy of the microparticles revealed a spherical, nonporous and uniform appearance, with a smooth surface. The geometric mean diameter of the microparticles was found to be 2-9 µm, which more than 75% were below 3.5 µm and drug incorporation efficiency of 59.74 to 72.48% (w/w). In vitro release profile for formulations containing diltiazem HCl loaded BSA microparticles with heat stabilization technique shows slow controlled the release of the drug up to 24 hours. The release pattern was biphasic, characterized by an initial burst effect followed by a slow release. All selected microparticles exhibited a prolonged release for almost 24 hours. On comparing regression-coefficient (r²) values for Hixson Crowel, Higuchi and Peppas kinetic models, different batches of microparticles showed Fickian, non-Fickian, and diffusion kinetics. The release mechanism was regulated by D:P ratio. From the statistical analysis it was observed that as the drug:polymer (D:P) ratio increased, there was a significant increase in the encapsulation efficiency. Based on the particle size, entrapment efficiency and physical appearance, DTM-3 formulations were selected for in vivo release study and stability study. The in vivo result of drug loaded microparticles showed preferential drug targeting to liver followed by lungs, kidneys and spleen. Stability studies showed that maximum drug content and closest in vitro release to initial data were found in the formulation stored at 4 ºC. In present study, diltiazem HCl loaded BSA microparticles were prepared and targeted to various organs to satisfactory level and were found to be stable at 4 ºC.A eficácia terapêutica de um fármaco depende da manutenção de seu nível plasmático adequado em determinado intervalo de tempo. Nesse sentido, a liberação modificada de fármacos está disponível em muitas vias de administração e oferece muitas vantagens (como micropartículas e nanopartículas) quando comparada às formulações de liberação imediata. Essas vantagens incluem reduzida frequência da dosagem, melhor controle terapêutico e menos efeitos colaterais. Assim sendo, esses produtos apresentam maior aceitação pelos pacientes. Os avanços na ciência dos materiais, na engenharia das partículas, em manufatura e em nanotecnologia permitiram a introdução no mercado de vários produtos de liberação modificada e vários outros se encontram em desenvolvimento pré-clínico e clínico. O objetivo do presente trabalho foi preparar e avaliar o fármaco cloridrato de diltiazem associado a micropartículas de albumina utilizando planejamento fatorial. As micropartículas de albumina, um polímero natural, foram preparadas por método de emulsão empregando estabilização por calor. As formulações selecionadas foram caracterizadas no que se refere à sua eficiência de encapsulamento, tamanho médio de partículas, morfologia de superfície e perfil de liberação do fármaco. A análise de variância relativa à eficiência de encapsulamento indicou superfície de resposta linear. Com referência à morfologia superficial, essa foi avaliada empregando microscopia eletrônica de varredura. Essa análise revelou micropartículas esféricas, não porosas e de aparência uniforme, com superfície lisa. O diâmetro médio das micropartículas foi entre 2 e 9 µm, sendo que mais de 75% das micropartículas se apresentaram abaixo de 3,5 µm. Além disso, a eficiência de encapsulamento foi entre 59,74 e 72,48%. Quanto ao ensaio para avaliação do perfil de liberação in vitro do fármaco associado às micropartículas, as formulações apresentaram liberação lenta até 24 horas. O comportamento foi caracterizado por liberação inicial (efeito burst) seguida por liberação lenta. Todas as fórmulas selecionadas apresentaram liberação prolongada por aproximadamente 24 horas. Na comparação entre os valores de coeficientes de regressão (R²), os modelos propostos por Hixson Crowel, Higuchi e Peppas, para diferentes formulações de micropartículas, demonstraram cinética de liberação de acordo com modelo Fickiano e não-Fickiano. O mecanismo de liberação do fármaco foi regulado pela razão entre o fármaco e o polímero. A análise estatística revelou significativo aumento da eficiência de encapsulamento quando essa razão aumentou. As avaliações relativas à análise dimensional das micropartículas, à eficiência de encapsulamento do fármaco e à morfologia permitiram a seleção da formulação DTM-3 para os ensaios de liberação in vivo e para o estudo da estabilidade. O ensaio de liberação in vivo do fármaco associado às micropartículas demonstrou sítio-alvo preferencial no fígado, seguido pelos pulmões rins e baço. No presente estudo, as micropartículas de albumina contendo cloridrato de diltiazem foram adequadamente preparadas e orientadas satisfatoriamente para vários órgãos. Além disso, a formulação selecionada apresentou estabilidade físico-química a 4 ºC

Homocysteine and other markers of cardiovascular risk during a manic episode in patients with bipolar disorder

Objective: To evaluate serum levels of different biomarkers associated with cardiovascular disease in patients with bipolar disorder (BD). Patients were prospectively evaluated in two separate instances: during acute mania and after remission of manic symptoms. All measurements were compared with those of healthy controls. Methods: The study included 30 patients with BD and 30 healthy controls, matched for gender and age. Biochemical parameters evaluated included homocysteine (Hcy), folic acid, vitamin B12, ferritin, creatine kinase (CK) and C-reactive protein (CRP). Results: Hcy levels were significantly higher in the BD patients, both during mania and after achieving euthymia. When Hcy was adjusted for body mass index, there was no significant difference between patients and controls. Ferritin was the only marker that showed a significant decrease during mania when compared to both euthymic patients and controls. There were no significant differences for folate, vitamin B12, CK and CRP. Conclusions: These findings do not show an association between alterations of markers of cardiovascular risk during manic episodes. Further studies are necessary to determine factors and mechanisms associated with cardiovascular risk in patients with BD

Self-similarity of contact line depinning from textured surfaces

The mobility of drops on surfaces is important in many biological and industrial processes, but the phenomena governing their adhesion, which is dictated by the morphology of the three-phase contact line, remain unclear. Here we describe a technique for measuring the dynamic behaviour of the three-phase contact line at micron length scales using environmental scanning electron microscopy. We examine a superhydrophobic surface on which a drop’s adhesion is governed by capillary bridges at the receding contact line. We measure the microscale receding contact angle of each bridge and show that the Gibbs criterion is satisfied at the microscale. We reveal a hitherto unknown self-similar depinning mechanism that shows how some hierarchical textures such as lotus leaves lead to reduced pinning, and counter-intuitively, how some lead to increased pinning. We develop a model to predict adhesion force and experimentally verify the model’s broad applicability on both synthetic and natural textured surfaces.National Science Foundation (U.S.) (CAREER Award 0952564)DuPont MIT AllianceNational Science Foundation (U.S.). Graduate Research Fellowship ProgramNational Science Foundation (U.S.) (Award ECS-0335765

Regional and experiential differences in surgeon preference for the treatment of cervical facet injuries: a case study survey with the AO Spine Cervical Classification Validation Group

Purpose: The management of cervical facet dislocation injuries remains controversial. The main purpose of this investigation was to identify whether a surgeon’s geographic location or years in practice influences their preferred management of traumatic cervical facet dislocation injuries. Methods: A survey was sent to 272 AO Spine members across all geographic regions and with a variety of practice experience. The survey included clinical case scenarios of cervical facet dislocation injuries and asked responders to select preferences among various diagnostic and management options. Results: A total of 189 complete responses were received. Over 50% of responding surgeons in each region elected to initiate management of cervical facet dislocation injuries with an MRI, with 6 case exceptions. Overall, there was considerable agreement between American and European responders regarding management of these injuries, with only 3 cases exhibiting a significant difference. Additionally, results also exhibited considerable management agreement between those with ≤ 10 and &gt; 10&nbsp;years of practice experience, with only 2 case exceptions noted. Conclusion: More than half of responders, regardless of geographical location or practice experience, identified MRI as a screening imaging modality when managing cervical facet dislocation injuries, regardless of the status of the spinal cord and prior to any additional intervention. Additionally, a majority of surgeons would elect an anterior approach for the surgical management of these injuries. The study found overall agreement in management preferences of cervical facet dislocation injuries around the globe

Quantifying predictors for the spatial diffusion of avian influenza virus in China

BACKGROUND: Avian influenza virus (AIV) causes both severe outbreaks and endemic disease among poultry and has caused sporadic human infections in Asia, furthermore the routes of transmission in avian species between geographic regions can be numerous and complex. Using nucleotide sequences from the internal protein coding segments of AIV, we performed a Bayesian phylogeographic study to uncover regional routes of transmission and factors predictive of the rate of viral diffusion within China. RESULTS: We found that the Central area and Pan-Pearl River Delta were the two main sources of AIV diffusion, while the East Coast areas especially the Yangtze River delta, were the major targets of viral invasion. Next we investigated the extent to which economic, agricultural, environmental and climatic regional data was predictive of viral diffusion by fitting phylogeographic discrete trait models using generalised linear models. CONCLUSIONS: Our results highlighted that the economic-agricultural predictors, especially the poultry population density and the number of farm product markets, are the key determinants of spatial diffusion of AIV in China; high human density and freight transportation are also important predictors of high rates of viral transmission; Climate features (e.g. temperature) were correlated to the viral invasion in the destination to some degree; while little or no impacts were found from natural environment factors (such as surface water coverage). This study uncovers the risk factors and enhances our understanding of the spatial dynamics of AIV in bird populations. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1186/s12862-016-0845-3) contains supplementary material, which is available to authorized users