A PUF based on transient effect ring oscillator and insensitive to locking phenomenon

International audienceThis paper presents a new silicon physical unclonable function (PUF) based on a transient effect ring oscillator (TERO). The proposed PUF has state of the art PUF characteristics with a good ratio of PUF response variability to response length. Unlike RO-PUF, it is not sensitive to the locking phenomenon, which challenges the use of ring oscillators for the design of both PUF and TRNG. The novel architecture using differential structures guarantees high stability of the TERO-PUF. The area of the TERO-PUF is relatively high, but is still comparable with other PUF designs. However, since the same piece of hardware can be used for both PUF and random number generation, the proposed principle offers an interesting low area mixed solution

Effects of steel corrosion to BFRP Strengthened columns under eccentric loading

The experiment consists of twenty-four mid-scale rectangular RC columns (200x200x800mm) strengthening by BFRP sheets and research variables include: BFRP layer (0, 1, and 3 layers); eccentricity (25mm and 75mm); and 4 levels of steel corrosion. The results reveal that SEL (ratio of ultimate load of strengthened member to that of corresponding controlled member) is direct proportion with steel corrosion while SEV (ratio of ultimate vertical displacement of strengthened member to that of corresponding controlled member) is inverse proportion with steel corrosion; SEL slightly increases with the increase of BFRP layer and eccentricity; but SEV decreases noticeably with the increase of BFRP layer and eccentricity. In addition,the interaction between FRP sheets, stirrups, and longitudinal reinforcement in steel degraded BFRP strengthened columns is very strong.However, column design basing on current design manuals and codes as ACI 440.2R and CNR DT 200R1 has not mentioned this affect. Thus, the load capacity prediction of column being strengthened by BFRP sheets should include levels of steel corrosion for reality, reasonable, and integral of the design

Effects of steel corrosion to BFRP Strengthened columns under eccentric loading

The experiment consists of twenty-four mid-scale rectangular RC columns (200x200x800mm) strengthening by BFRP sheets and research variables include: BFRP layer (0, 1, and 3 layers); eccentricity (25mm and 75mm); and 4 levels of steel corrosion. The results reveal that SEL (ratio of ultimate load of strengthened member to that of corresponding controlled member) is direct proportion with steel corrosion while SEV (ratio of ultimate vertical displacement of strengthened member to that of corresponding controlled member) is inverse proportion with steel corrosion; SEL slightly increases with the increase of BFRP layer and eccentricity; but SEV decreases noticeably with the increase of BFRP layer and eccentricity. In addition,the interaction between FRP sheets, stirrups, and longitudinal reinforcement in steel degraded BFRP strengthened columns is very strong.However, column design basing on current design manuals and codes as ACI 440.2R and CNR DT 200R1 has not mentioned this affect. Thus, the load capacity prediction of column being strengthened by BFRP sheets should include levels of steel corrosion for reality, reasonable, and integral of the design

MORPHOLOGICAL AWARENESS OF STUDENTS MAJORING IN ENGLISH STUDIES TOWARDS VOCABULARY LEARNING

For those learning a second language, vocabulary plays a vital role in mastering the new one, and possessing a colossal vocabulary is extremely necessary. The paper aims to look into and assess students' awareness of morphology and the effectiveness of this approach through vocabulary learning. The subjects in this study were juniors majoring in English at a university in the south of Vietnam. The test, questionnaire, and interview were the three instruments used in this study to triangulate the results. A total of 49 students majoring in English Studies took the test, 40 students completed the questionnaire, and four students participated in an interview to evaluate their proficiency and morphological knowledge. The results of the study showed that students' awareness levels were average, and they were knowledgeable enough to employ this strategy for acquiring vocabulary. Additionally, it also enables students to comprehend morphology's benefits and drawbacks during their learning vocabulary process.  Article visualizations

Simple thermal-electrical model of photovoltaic panels with cooler-integrated sun tracker

This paper presents a simple thermal-electrical model of a photovoltaic panel with a cooler-integrated sun tracker. Based on the model and obtained weather data, we analyzed the improved overall efficiency in a year as well as the performance in each typical weather case for photovoltaic panels with fixed-tilt systems with a tilt angle equal to latitude, fixed-tilt systems with cooler, a single-axis sun tracker, and a cooler-integrated single-axis sun tracker. The results show that on a sunny summer day with few clouds, the performance of the photovoltaic panels with the proposed system improved and reached 32.76% compared with the fixed-tilt systems. On a sunny day with clouds in the wet, rainy season, because of the low air temperature and the high wind speed, the photovoltaic panel temperature was lower than the cooler’s initial set temperature; the performance of the photovoltaic panel with the proposed system improved by 12.55% compared with the fixed-tilt system. Simulation results show that, over one year, the overall efficiency of the proposed system markedly improved by 16.35, 13.03, and 3.68% compared with the photovoltaic panel with the fixed-tilt system, the cooler, and the single-axis sun tracker, respectively. The simulation results can serve as a premise for future experimental models

Reconfigurable LUT: A Double Edged Sword for Security-Critical Applications

Modern FPGAs offer various new features for enhanced reconfigurability and better performance. One of such feature is a dynamically Reconfigurable LUT (RLUT) whose content can be updated internally, even during run-time. There are many scenarios like pattern matching where this feature has been shown to enhance the performance of the system. In this paper, we study RLUT in the context of secure applications. We describe the basic functionality of RLUT and discuss its potential applications for security. Next, we design several case-studies to exploit RLUT feature in security critical scenarios. The exploitation are studied from a perspective of a designer (e.g. designing countermeasures) as well as a hacker (inserting hardware Trojans)

Network Coding with Multimedia Transmission and Cognitive Networking: An Implementation based on Software-Defined Radio

Network coding (NC) is considered a breakthrough to improve throughput, robustness, and security of wireless networks. Although the theoretical aspects of NC have been extensively investigated, there have been only few experiments with pure NC schematics. This paper presents an implementation of NC under a two-way relay model and extends it to two non-straightforward scenarios: (i) multimedia transmission with layered coding and multiple-description coding, and (ii) cognitive radio with Vandermonde frequency division multiplexing (VFDM). The implementation is in real time and based on software-defined radio (SDR). The experimental results show that, by combining NC and source coding, we can control the quality of the received multimedia content in an on-demand manner. Whereas in the VFDM-based cognitive radio, the quality of the received content in the primary receiver is low (due to imperfect channel estimation) yet retrievable. Our implementation results serve as a proof for the practicability of network coding in relevant applications

Topic choice for a STEM lesson with local practice context

One of the main features of STEM education is to be oriented towards practical activities and knowledge application to solve real-life problems. However, in the first step of deployment, teachers often use copied problem contexts from abroad. There are many difficulties in approaching, creating excitement and motivation for students when it is not close to their real life. The more relevant the topic to the real local context is, the more important it is to motivate students to participate and at the same time make it easy for teachers to find topics for the STEM educational model. In this study, when choosing a topic associated with a real local context, both teachers and students easily reach and achieve goals with the STEM educational model