2,708 research outputs found
Strong exciton-photon coupling with colloidal nanoplatelets in an open microcavity
Colloidal semiconductor nanoplatelets exhibit quantum size effects due to
their thickness of only few monolayers, together with strong optical band-edge
transitions facilitated by large lateral extensions. In this article we
demonstrate room temperature strong coupling of the light and heavy hole
exciton transitions of CdSe nanoplatelets with the photonic modes of an open
planar microcavity. Vacuum Rabi splittings of meV and meV
are observed for the heavy and light hole excitons respectively, together with
a polariton-mediated hybridisation of both transitions. By measuring the
concentration of platelets in the film we compute the transition dipole moment
of a nanoplatelet exciton to be D. The large oscillator
strength and fluorescence quantum yield of semiconductor nanoplatelets provide
a perspective towards novel photonic devices, combining polaritonic and
spinoptronic effects.Comment: 9 pages, 4 figure
APETx4, a novel sea anemone toxin and a modulator of the cancer-relevant potassium channel K<sub>V</sub>10.1
The human ether-Ă -go-go channel (hEag1 or KV10.1) is a cancer-relevant voltage-gated potassium channel that is overexpressed in a majority of human tumors. Peptides that are able to selectively inhibit this channel can be lead compounds in the search for new anticancer drugs. Here, we report the activity-guided purification and electrophysiological characterization of a novel KV10.1 inhibitor from the sea anemone Anthopleura elegantissima. Purified sea anemone fractions were screened for inhibitory activity on KV10.1 by measuring whole-cell currents as expressed in Xenopus laevis oocytes using the two-microelectrode voltage clamp technique. Fractions that showed activity on Kv10.1 were further purified by RP-HPLC. The amino acid sequence of the peptide was determined by a combination of MALDI- LIFT-TOF/TOF MS/MS and CID-ESI-FT-ICR MS/MS and showed a high similarity with APETx1 and APETx3 and was therefore named APETx4. Subsequently, the peptide was electrophysiologically characterized on KV10.1. The selectivity of the toxin was investigated on an array of voltage-gated ion channels, including the cardiac human ether-Ă -go-go-related gene potassium channel (hERG or Kv11.1). The toxin inhibits KV10.1 with an IC50 value of 1.1 ÎĽM. In the presence of a similar toxin concentration, a shift of the activation curve towards more positive potentials was observed. Similar to the effect of the gating modifier toxin APETx1 on hERG, the inhibition of Kv10.1 by the isolated toxin is reduced at more positive voltages and the peptide seems to keep the channel in a closed state. Although the peptide also induces inhibitory effects on other KV and NaV channels, it exhibits no significant effect on hERG. Moreover, APETx4 induces a concentration-dependent cytotoxic and proapoptotic effect in various cancerous and noncancerous cell lines. This newly identified KV10.1 inhibitor can be used as a tool to further characterize the oncogenic channel KV10.1 or as a scaffold for the design and synthesis of more potent and safer anticancer drugs
Generic 3D Representation via Pose Estimation and Matching
Though a large body of computer vision research has investigated developing
generic semantic representations, efforts towards developing a similar
representation for 3D has been limited. In this paper, we learn a generic 3D
representation through solving a set of foundational proxy 3D tasks:
object-centric camera pose estimation and wide baseline feature matching. Our
method is based upon the premise that by providing supervision over a set of
carefully selected foundational tasks, generalization to novel tasks and
abstraction capabilities can be achieved. We empirically show that the internal
representation of a multi-task ConvNet trained to solve the above core problems
generalizes to novel 3D tasks (e.g., scene layout estimation, object pose
estimation, surface normal estimation) without the need for fine-tuning and
shows traits of abstraction abilities (e.g., cross-modality pose estimation).
In the context of the core supervised tasks, we demonstrate our representation
achieves state-of-the-art wide baseline feature matching results without
requiring apriori rectification (unlike SIFT and the majority of learned
features). We also show 6DOF camera pose estimation given a pair local image
patches. The accuracy of both supervised tasks come comparable to humans.
Finally, we contribute a large-scale dataset composed of object-centric street
view scenes along with point correspondences and camera pose information, and
conclude with a discussion on the learned representation and open research
questions.Comment: Published in ECCV16. See the project website
http://3drepresentation.stanford.edu/ and dataset website
https://github.com/amir32002/3D_Street_Vie
Electrical control of single-photon emission in highly charged individual colloidal quantum dots
Electron transfer to an individual quantum dot promotes the formation of charged excitons with enhanced recombination pathways and reduced lifetimes. Excitons with only one or two extra charges have been observed and exploited for very efficient lasing or single-quantum dot light-emitting diodes. Here, by room-temperature time-resolved experiments on individual giant-shell CdSe/CdS quantum dots, we show the electrochemical formation of highly charged excitons containing more than 12 electrons and 1 hole. We report the control over intensity blinking, along with a deterministic manipulation of quantum dot photodynamics, with an observed 210-fold increase in the decay rate, accompanied by 12-fold decrease in the emission intensity, while preserving single-photon emission characteristics. These results pave the way for deterministic control over the charge state, and room-temperature decay rate engineering for colloidal quantum dot-based classical and quantum communication technologies
Synthesis of Air-Stable CdSe/ZnS Core–Shell Nanoplatelets with Tunable Emission Wavelength
In the past few years, several protocols have been reported on the synthesis of CdSe nanoplatelets with narrow photoluminescence (PL) spectrum, high PL quantum efficiency, and short exciton lifetime. The corresponding core/shell nanoplatelets are however still mostly based on CdSe/CdS, which possess an extended lifetime and a strong red shift of the band-edge absorption and emission, in accordance with a quasi-type-II band alignment. Here we report on a robust synthesis procedure to grow a ZnS shell around CdSe nanoplatelets at moderate temperatures of 100–150 °C, to improve the optical properties of CdSe nanoplatelets via a type-I core/shell heterostructure. The shell growth is performed under ambient atmosphere, in either toluene or 1,2-dichlorobenzene. The variation of the shell thickness induces a continuous red shift of the PL peak, eventually reaching 611 nm. The PL quantum efficiency is increased compared to the original CdSe cores, with values up to 60% depending on the shell thickness. High-resolution transmission electron microscopy reveals a bending of the nanoplatelets caused by strain due to 12% lattice mismatch between CdSe and ZnS. The present procedure can easily be translated to other core/shell nanocrystals, such as CdSe/CdS and CdSe/CdZnS nanoplatelets.The present publication is realized with the support of the Ministero degli Affari Esteri e della Cooperazione Internazionale (IONX-NC4SOL). This project has also received funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 696656 (GrapheneCore1). J.L.M. acknowledges support from UJI project P1-1B2014-24 and MINECO project CTQ2014-60178-P
Actual and preferred place of death of home-dwelling patients in four European countries: making sense of quality indicators
Background: Dying at home and dying at the preferred place of death are advocated to be desirable outcomes of palliative care. More insight is needed in their usefulness as quality indicators. Our objective is to describe whether " the percentage of patients dying at home'' and "the percentage of patients who died in their place of preference'' are feasible and informative quality indicators.
Methods and Findings: A mortality follow-back study was conducted, based on data recorded by representative GP networks regarding home-dwelling patients who died non-suddenly in Belgium (n = 1036), the Netherlands (n = 512), Italy (n = 1639) or Spain (n = 565). "The percentage of patients dying at home'' ranged between 35.3% (Belgium) and 50.6% (the Netherlands) in the four countries, while "the percentage of patients dying at their preferred place of death'' ranged between 67.8% (Italy) and 86.0% (Spain). Both indicators were strongly associated with palliative care provision by the GP (odds ratios of 1.55-13.23 and 2.30-6.63, respectively). The quality indicator concerning the preferred place of death offers a broader view than the indicator concerning home deaths, as it takes into account all preferences met in all locations. However, GPs did not know the preferences for place of death in 39.6% (the Netherlands) to 70.3% (Italy), whereas the actual place of death was known in almost all cases.
Conclusion: GPs know their patients' actual place of death, making the percentage of home deaths a feasible indicator for collection by GPs. However, patients' preferred place of death was often unknown to the GP. We therefore recommend using information from relatives as long as information from GPs on the preferred place of death is lacking. Timely communication about the place where patients want to be cared for at the end of life remains a challenge for GPs
Synthesis of highly luminescent wurtzite CdSe/CdS giant-shell nanocrystals using a fast continuous injection route
We synthesized CdSe/CdS giant-shell nanocrystals, with a CdSe core diameter between 2.8 nm and 5.5 nm, and a CdS shell thickness of up to 7–8 nm (equivalent to about 20 monolayers of CdS). Both the core and shell have a wurtzite crystal structure, yielding epitaxial growth of the shell and nearly defect-free crystals. As a result, the photoluminescence (PL) quantum efficiency (QE) is as high as 90%. Quantitative PL measurements at various excitation wavelengths allow us to separate the nonradiative decay into contributions from interface and surface trapping, giving us pathways for future optimization of the structure. In addition, the NCs do not blink, and the giant shell and concurring strong electron delocalization efficiently suppress Auger recombination, yielding a biexciton lifetime of about 15 ns. The corresponding biexciton PL QE equals 11% in 5.5/18.1 nm CdSe/CdS. Variable-temperature time-resolved PL and PL under magnetic fields further reveal that the emission at cryogenic temperature originates from a negative trion-state, in agreement with other CdSe/CdS giant-shell systems reported in the literature
Ultrafast supercontinuum spectroscopy of carrier multiplication and biexcitonic effects in excited states of PbS quantum dots
We examine the multiple exciton population dynamics in PbS quantum dots by
ultrafast spectrally-resolved supercontinuum transient absorption (SC-TA). We
simultaneously probe the first three excitonic transitions over a broad
spectral range. Transient spectra show the presence of first order bleach of
absorption for the 1S_h-1S_e transition and second order bleach along with
photoinduced absorption band for 1P_h-1P_e transition. We also report evidence
of the one-photon forbidden 1S_{h,e}-1P_{h,e} transition. We examine signatures
of carrier multiplication (multiexcitons for the single absorbed photon) from
analysis of the first and second order bleaches, in the limit of low absorbed
photon numbers (~ 10^-2), at pump energies from two to four times the
semiconductor band gap. The multiexciton generation efficiency is discussed
both in terms of a broadband global fit and the ratio between early- to
long-time transient absorption signals.. Analysis of population dynamics shows
that the bleach peak due to the biexciton population is red-shifted respect the
single exciton one, indicating a positive binding energy.Comment: 16 pages, 5 figure
Angular redistribution of near-infrared emission from quantum dots in 3D photonic crystals
We study the angle-resolved spontaneous emission of near-infrared light
sources in 3D photonic crystals over a wavelength range from 1200 to 1550 nm.
To this end PbSe quantum dots are used as light sources inside titania inverse
opal photonic crystals. Strong deviations from the Lambertian emission profile
are observed. An attenuation of 60 % is observed in the angle dependent radiant
flux emitted from the samples due to photonic stop bands. At angles that
correspond to the edges of the stop band the emitted flux is increased by up to
34 %. This increase is explained by the redistribution of Bragg-diffracted
light over the available escape angles. The results are quantitatively
explained by an expanded escape-function model. This model is based on
diffusion theory and adapted to photonic crystals using band structure
calculations. Our results are the first angular redistributions and escape
functions measured at near-infrared, including telecom, wavelengths. In
addition, this is the first time for this model to be applied to describe
emission from samples that are optically thick for the excitation light and
relatively thin for the photoluminesence light.Comment: 24 pages, 8 figures (current format = single column, double spaced
- …