Statystyka w badaniach medycznych

S\u142owa kluczowe: statystyka w badaniach medycznych; metody analizy statystycznej \u2013 statystyka opisowa, testowanie hipotez i testy statystyczne; korelacja \u2013 badanie zale\u17cno\u15bci; biometria; pomiary biologiczn

Direct replacement of antibodies with molecularly imprinted polymer (MIP) nanoparticles in ELISA - development of a novel assay for vancomycin

A simple and straightforward technique for coating microplate wells with molecularly imprinted polymer nanoparticles (nanoMIPs) to develop ELISA type assays is presented here for the first time. NanoMIPs were synthesized by a solid phase approach with immobilized vancomycin (template) and characterized using Biacore 3000, dynamic light scattering and electron microscopy. Immobilization, blocking and washing conditions were optimized in microplate format. The detection of vancomycin was achieved in competitive binding experiments with a HRP-vancomycin conjugate. The assay was capable of measuring vancomycin in buffer and in blood plasma within the range 0.001-70 nM with a detection limit of 0.0025 nM (2.5 pM). The sensitivity of the assay was three orders of magnitude better than a previously described ELISA based on antibodies. In these experiments nanoMIPs have shown high affinity and minimal interference from blood plasma components. Immobilized nanoMIPs were stored for 1 month at room temperature without any detrimental effects to their binding properties. The high affinity of nanoMIPs and the lack of a requirement for cold chain logistics make them an attractive alternative to traditional antibodies used in ELIS

Recommendation of RILEM TC 212-ACD: acousticemission and related NDE techniques for crack detectionand damage evaluation in concrete. Measurement method for acoustic emission signals in concrete

The text presented hereafter is a draft for general consideration

Recommendation of RILEM TC 212-ACD: acousticemission and related NDE techniques for crack detectionand damage evaluation in concrete.Test method for damage qualification of reinforced concrete beams by acousticemission

The text presented hereafter is a draft for general consideration

Large-Scale Statistical Analysis of Defect Emission in hBN: Revealing Spectral Families and Influence of Flakes Morphology

Quantum emitters in two-dimensional layered hexagonal boron nitride are quickly emerging as a highly promising platform for next-generation quantum technologies. However, precise identification and control of defects are key parameters to achieve the next step in their development. We conducted a comprehensive study by analyzing over 10,000 photoluminescence emission lines, revealing 11 distinct defect families within the 1.6 to 2.2 eV energy range. This challenges hypotheses of a random energy distribution. We also reported averaged defect parameters, including emission linewidths, spatial density, phonon side bands, and the Debye-Waller factors. These findings provide valuable insights to decipher the microscopic origin of emitters in hBN hosts. We also explored the influence of hBN host morphology on defect family formation, demonstrating its crucial impact. By tuning flake size and arrangement we achieve selective control of defect types while maintaining high spatial density. This offers a scalable approach to defect emission control, diverging from costly engineering methods. It highlights the importance of investigating flake morphological control to gain deeper insights into the origins of defects and to expand the spectral tailoring capabilities of defects in hBN

Introducing MINA-The Molecularly Imprinted Nanoparticles Assay

A new ELISA‐ (enzyme‐linked immunosorbent assay)‐like assay is demonstrated in which no elements of biological origin are used for molecular recognition or signaling. Composite imprinted nanoparticles that contain a catalytic core and which are synthesized by using a solid‐phase approach can simultaneously act as recognition/signaling elements, and be used with minimal modifications to standard assay protocols. This assay provides a new route towards replacement of unstable biomolecules in immunoassays

Does size matter? Study of performance of pseudo-ELISAs based on molecularly imprinted polymer nanoparticles prepared for analytes of different sizes

The aim of this work is to evaluate whether the size of the analyte used as template for the synthesis of molecularly imprinted polymer nanoparticles (nanoMIPs) can affect their performance in pseudo-enzyme linked immunosorbent assays (pseudo-ELISAs). Successful demonstration of a nanoMIPs-based pseudo-ELISA for vancomycin (1449.3 g mol) was demonstrated earlier. In the present investigation, the following analytes were selected: horseradish peroxidase (HRP, 44 kDa), cytochrome C (Cyt C, 12 kDa) biotin (244.31 g mol) and melamine (126.12 g mol). NanoMIPs with a similar composition for all analytes were synthesised by persulfate-initiated polymerisation in water. In addition, core-shell nanoMIPs coated with polyethylene glycol (PEG) and imprinted for melamine were produced in organics and tested. The polymerisation of the nanoparticles was done using a solid-phase approach with the correspondent template immobilised on glass beads. The performance of the nanoMIPs used as replacement for antibodies in direct pseudo-ELISA (for the enzymes) and competitive pseudo-ELISA for the smaller analytes was investigated. For the competitive mode we rely on competition for the binding to the nanoparticles between free analyte and corresponding analyte-HRP conjugate. The results revealed that the best performances were obtained for nanoMIPs synthesised in aqueous media for the larger analytes. In addition, this approach was successful for biotin but completely failed for the smallest template melamine. This problem was solved using nanoMIP prepared by UV polymerisation in an organic media with a PEG shell. This study demonstrates that the preparation of nanoMIP by solid-phase approach can produce material with high affinity and potential to replace antibodies in ELISA tests for both large and small analytes. This makes this technology versatile and applicable to practically any target analyte and diagnostic field

Sensor characterization for multisensor odor-discrimination system

In recent years, with the advent of new and cheaper sensors, the use of olfactory systems in homes, industries, and hospitals has a new start. Multisensor systems can improve the ability to distinguish between complex mixtures of volatile substances. To develop multisensor systems that are accurate and reliable, it is important to take into account the anomalies that may arise because of electronic instabilities, types of sensors, and air flow. In this approach, 32 metal oxide semiconductor sensors of 7 different types and operating at different temperatures have been used to develop a multisensor olfactory system. Each type of sensor has been characterized to select the most suitable temperature combinations. In addition, a prechamber has been designed to ensure a good air flow from the sample to the sensing area. The multisensor system has been tested with good results to perform multidimensional information detection of two fruits, based on obtaining sensor matrix data, extracting three features parameters from each sensor curve and using these parameters as the input to a pattern recognition system. (C) 2012 Elsevier B.V. All rights reserved.Cueto Belchí, AD.; Rothpfeffer, N.; Pelegrí Sebastiá, J.; Chilo, J.; García Rodríguez, D.; Sogorb Devesa, TC. (2013). Sensor characterization for multisensor odor-discrimination system. Sensors and Actuators A: Physical. 191:68-72. doi:10.1016/j.sna.2012.11.039S687219

Long-term renal outcome in children with OCRL mutations: retrospective analysis of a large international cohort

BACKGROUND: Lowe syndrome (LS) and Dent-2 disease (DD2) are disorders associated with mutations in the OCRL gene and characterized by progressive chronic kidney disease (CKD). Here, we aimed to investigate the long-term renal outcome and identify potential determinants of CKD and its progression in children with these tubulopathies. METHODS: Retrospective analyses were conducted of clinical and genetic data in a cohort of 106 boys (LS: 88 and DD2: 18). For genotype-phenotype analysis, we grouped mutations according to their type and localization. To investigate progression of CKD we used survival analysis by Kaplan-Meier method using stage 3 CKD as the end-point. RESULTS: Median estimated glomerular filtration rate (eGFR) was lower in the LS group compared with DD2 (58.8 versus 87.4 mL/min/1.73 m(2), P < 0.01). CKD stage II-V was found in 82% of patients, of these 58% and 28% had moderate-to-severe CKD in LS and DD2, respectively. Three patients (3%), all with LS, developed stage 5 of CKD. Survival analysis showed that LS was also associated with a faster CKD progression than DD2 (P < 0.01). On multivariate analysis, eGFR was dependent only on age (b = -0.46, P < 0.001). Localization, but not type of mutations, tended to correlate with eGFR. There was also no significant association between presence of nephrocalcinosis, hypercalciuria, proteinuria and number of adverse clinical events and CKD. CONCLUSIONS: CKD is commonly found in children with OCRL mutations. CKD progression was strongly related to the underlying diagnosis but did not associate with clinical parameters, such as nephrocalcinosis or proteinuria