From nature to lab: scaling self-formed meandering and braided rivers

River morphodynamics and sediment transportRiver morphology and morphodynamic

The Dynamics of CO 2 ‐Driven Granular Flows in Gullies on Mars

Martian gullies are landforms consisting of an erosional alcove, a channel, and a depositional apron. A significant proportion of Martian gullies at the mid‐latitudes is active today. The seasonal sublimation of CO2 ice has been suggested as a driver behind present‐day gully activity. However, due to a lack of in situ observations, the actual processes causing the observed changes remain unresolved. Here, we present results from flume experiments in environmental chambers in which we created CO2‐driven granular flows under Martian atmospheric conditions. Our experiments show that under Martian atmospheric pressure, large amounts of granular material can be fluidized by the sublimation of small quantities of CO2 ice in the granular mixture (only 0.5% of the volume fraction of the flow) under slope angles as low as 10°. Dimensionless scaling of the CO2‐driven granular flows shows that they are dynamically similar to terrestrial two‐phase granular flows, that is, debris flows and pyroclastic flows. The similarity in flow dynamics explains the similarity in deposit morphology with levees and lobes, supporting the hypothesis that CO2‐driven granular flows on Mars are not merely modifying older landforms, but they are actively forming them. This has far‐reaching implications for the processes thought to have formed these gullies over time. For other planetary bodies in our solar system, our experimental results suggest that the existence of gully like landforms is not necessarily evidence for flowing liquids but that they could also be formed or modified by sublimation‐driven flow processes

Data supplement to 'On the relative role of abiotic and biotic controls on channel network development: insights from scaled tidal flume experiments'

Abstract: This dataset contains the raw data for the ESurf paper Hautekiet et al. (2023). The supplementary material includes the DSMs of four experiments derived from laser line scanning that were used to investigate the effect of spatio-temporal plant colonization patterns (bare (2x) \u2013 hydrochorous \u2013 patchy) on tidal channel network development. These DSMs have been processed (calibrated and corrected), filtered to remove outliers (10th and 90th percentiles were excluded) and interpolated to a 3 x 3 mm grid size (MAT format). Apart from that, the data package contains overhead imagery (TIF format). Data was generated for experimental estuaries in the 20m long Metronome tidal flume (https://www.uu.nl/metronome)

Turning the tide : Comparison of tidal flow by periodic sea level fluctuation and by periodic bed tilting in scaled landscape experiments of estuaries

Analogue models or scale experiments of estuaries and short tidal basins are notoriously difficult to create in the laboratory because of the difficulty to obtain currents strong enough to transport sand. Our recently discovered method to drive tidal currents by periodically tilting the entire flume leads to intense sediment transport in both the ebb and flood phase, causing dynamic channel and shoal patterns. However, it remains unclear whether tilting produces periodic flows with characteristic tidal properties that are sufficiently similar to those in nature for the purpose of landscape experiments. Moreover, it is not well understood why the flows driven by periodic sea level fluctuation, as in nature, are not sufficient for morphodynamic experiments. Here we compare for the first time the tidal currents driven by sea level fluctuations and by tilting. Experiments were run in a 20×3m straight flume, the Metronome, for a range of tilting periods and with one or two boundaries open at constant head with free inflow and outflow. Also, experiments were run with flow driven by periodic sea level fluctuations. We recorded surface flow velocity along the flume with particle imaging velocimetry and measured water levels along the flume. We compared the results to a one-dimensional model with shallow flow equations for a rough bed, which was tested on the experiments and applied to a range of length scales bridging small experiments and large estuaries. We found that the Reynolds method results in negligible flows along the flume except for the first few metres, whereas flume tilting results in nearly uniform reversing flow velocities along the entire flume that are strong enough to move sand. Furthermore, tidal excursion length relative to basin length and the dominance of friction over inertia is similar in tidal experiments and reality. The sediment mobility converges between the Reynolds method and tilting for flumes hundreds of metres long, which is impractical. Smaller flumes of a few metres in length, on the other hand, are much more dominated by friction than natural systems, meaning that sediment suspension would be impossible in the resulting laminar flow on tidal flats. Where the Reynolds method is limited by small sediment mobility and high tidal range relative to water depth, the tilting method allows for independent control over the variables flow depth, velocity, sediment mobility, tidal period and excursion length, and tidal asymmetry. A periodically tilting flume thus opens up the possibility of systematic biogeomorphological experimentation with self-formed estuaries

Quantifiable effectiveness of experimental scaling of river- and delta morphodynamics and stratigraphy

Laboratory experiments to simulate landscapes and stratigraphy often suffer from scale effects, because reducing length- and time scales leads to different behaviour of water and sediment. Classically, scaling proceeded from dimensional analysis of the equations of motion and sediment transport, and minor concessions, such as vertical length scale distortion, led to acceptable results. In the past decade many experiments were done that seriously violated these scaling rules, but nevertheless produced significant and insightful results that resemble the real world in quantifiable ways. Here we focus on self-formed fluvial channels and channel patterns in experiments. The objectives of this paper are 1) to identify what aspects of scaling considerations are most important for experiments that simulate morphodynamics and stratigraphy of rivers and deltas, 2) to establish a design strategy for experiments based on a combination of relaxed classical scale rules, theory of bars and meanders, and small-scale experiments focussed at specific processes. We present a number of small laboratory setups and protocols that we use to rapidly quantify erosional and depositional types of forms and dynamics that develop in the landscape experiments as a function of detailed properties, such as effective material strength, and to assess potential scale effects. Most importantly, the width-to-depth ratio of channels determines the bar pattern and meandering tendency. The strength of floodplain material determines these channel dimensions, and theory predicts that laboratory rivers should have 1.5 times larger width-to-depth ratios for the same bar pattern. We show how floodplain formation can be controlled by adding silt-sized silicaflour, bentonite, Medicago sativa (alfalfa) or Partially Hydrolyzed PolyAcrylamide (a synthetic polymer) to poorly sorted sediment. The experiments demonstrate that there is a narrow range of conditions between no mobility of bed or banks, and too much mobility. The density of vegetation and the volume proportion of silt allow well-controllable channel dimensions whereas the polymer proved difficult to control. The theory, detailed methods of quantification, and experimental setups presented here show that the rivers and deltas created in the laboratory seem to behave as natural rivers when the experimental conditions adhere to the relaxed scaling rules identified herein, and that required types of fluvio-deltaic morphodynamics can be reproduced based on conditions and sediments selected on the basis of a series of small-scale experiments

The Dynamics of CO2_ 2‐Driven Granular Flows in Gullies on Mars

International audienceMartian gullies are landforms consisting of an erosional alcove, a channel, and a depositional apron. A significant proportion of Martian gullies at the mid‐latitudes is active today. The seasonal sublimation of CO$_ 2$ ice has been suggested as a driver behind present‐day gully activity. However, due to a lack of in situ observations, the actual processes causing the observed changes remain unresolved. Here, we present results from flume experiments in environmental chambers in which we created CO$_ 2$‐driven granular flows under Martian atmospheric conditions. Our experiments show that under Martian atmospheric pressure, large amounts of granular material can be fluidized by the sublimation of small quantities of CO$_ 2$ ice in the granular mixture (only 0.5% of the volume fraction of the flow) under slope angles as low as 10°. Dimensionless scaling of the CO$_ 2$‐driven granular flows shows that they are dynamically similar to terrestrial two‐phase granular flows, that is, debris flows and pyroclastic flows. The similarity in flow dynamics explains the similarity in deposit morphology with levees and lobes, supporting the hypothesis that CO$_ 2$‐driven granular flows on Mars are not merely modifying older landforms, but they are actively forming them. This has far‐reaching implications for the processes thought to have formed these gullies over time. For other planetary bodies in our solar system, our experimental results suggest that the existence of gully like landforms is not necessarily evidence for flowing liquids but that they could also be formed or modified by sublimation‐driven flow processes

Turning the tide: Comparison of tidal flow by periodic sea level fluctuation and by periodic bed tilting in scaled landscape experiments of estuaries

Analogue models or scale experiments of estuaries and short tidal basins are notoriously difficult to create in the laboratory because of the difficulty to obtain currents strong enough to transport sand. Our recently discovered method to drive tidal currents by periodically tilting the entire flume leads to intense sediment transport in both the ebb and flood phase, causing dynamic channel and shoal patterns. However, it remains unclear whether tilting produces periodic flows with characteristic tidal properties that are sufficiently similar to those in nature for the purpose of landscape experiments. Moreover, it is not well understood why the flows driven by periodic sea level fluctuation, as in nature, are not sufficient for morphodynamic experiments. Here we compare for the first time the tidal currents driven by sea level fluctuations and by tilting. Experiments were run in a 20×3m straight flume, the Metronome, for a range of tilting periods and with one or two boundaries open at constant head with free inflow and outflow. Also, experiments were run with flow driven by periodic sea level fluctuations. We recorded surface flow velocity along the flume with particle imaging velocimetry and measured water levels along the flume. We compared the results to a one-dimensional model with shallow flow equations for a rough bed, which was tested on the experiments and applied to a range of length scales bridging small experiments and large estuaries. We found that the Reynolds method results in negligible flows along the flume except for the first few metres, whereas flume tilting results in nearly uniform reversing flow velocities along the entire flume that are strong enough to move sand. Furthermore, tidal excursion length relative to basin length and the dominance of friction over inertia is similar in tidal experiments and reality. The sediment mobility converges between the Reynolds method and tilting for flumes hundreds of metres long, which is impractical. Smaller flumes of a few metres in length, on the other hand, are much more dominated by friction than natural systems, meaning that sediment suspension would be impossible in the resulting laminar flow on tidal flats. Where the Reynolds method is limited by small sediment mobility and high tidal range relative to water depth, the tilting method allows for independent control over the variables flow depth, velocity, sediment mobility, tidal period and excursion length, and tidal asymmetry. A periodically tilting flume thus opens up the possibility of systematic biogeomorphological experimentation with self-formed estuaries