188 research outputs found
Sources and fate of PCDDs and PCDFs in rural and urban ecosystem and food chain in southern Vietnam
Problems related to Dioxins contamination in Southern Vietnam are until now still a hot newsreel and controversy subject in international conferences as well as in many articles. The adverse effects of Dioxins residue from chemicals used by U.S. Army during the Vietnam War (Ranch Hand Operation 1961 to 1971) have caused many consequences not only to Vietnamese ecosystem and people but also to the U.S army veterans that participated in the war at that period as reported in many scientific reports. In Vietnam, since 1980 many studies have been carried out in collaboration with overseas scientists and laboratories on Dioxin contamination levels as well as its influences on ecosystem and human health. However, regardless of many efforts, up to now the problem of Dioxin contamination and its consequences is not yet completely and appropriately solved. There is still relative high Dioxins residue in the areas named as "hot spot" in Southern Vietnam and its contamination is causing the adverse effects on local residents. Nowadays, studies on this subject are relatively difficult to perform due to many factors: over 30 years passed; land use disturbance; degradation and transfer of dioxin into biological food web; population emigration; etc.. In addition, a lack of related documents and military secrets also contributed to this. With the support of SDC in frame of a collaboration project between Vietnam and Switzerland, we have carried out the research named "Sources and Fate of PCDDs and PCDFs in rural and urban ecosystem and food chains of South-Vietnam". Our research has examined integratelly the PCDD/Fs sources with special regard on the PCDD/Fs source from the war, but also consider the others possible sources such industrial and municipal combustions, agricultural used chemicals, etc. The selected locations for our research have been set up based on collected document from Division 10-80 and Office 33 (two responsible organizations for Dioxins and related problems in Vietnam): CamLo District – QuangTri Province; DaNang City; MaDa Forest and BienHoa City (BienHoa Airforce Base and BienHung Lake) – DongNai Province; and industrial zone – Thu Duc – Hochiminh City. Seventeen 2,3,7,8-PCDD/Fs congeners have been chosen for our research due to their high toxicities. Soil, sediment, municipal waste incinerator (MWI) bottom ash, fish tissue, and human adipose are selected as the matrices to examine the PCDD/Fs residue. The result showed that even after more than 30 years, the PCDD/Fs concentration based on i-TEQ value (especially for 2,3,7,8-TCDD) is still higher than guideline values in some countries: very high i-TEQ value in cultivate soil of CamLo district and DaNang City. For the area named "hot spot" such BienHoa Airforce Base and BienHung Lake, the i-TEQ value and 2,3,7,8-TCDD concentration in soil and sediment are superior than values proposed by Agency for Toxic Substance and Disease Registry (ATSDR), Canadian Council of Ministers of the Environment (CCME) and U.S Environmental Protection Agency (U.S. EPA). The PCDD/Fs concentration in fish tissue of BienHung Lake (catfish and snake-head) is superior in comparison with European Council (EC) standard. The dioxin contamination risk for local resident health is very high due to the lack of information and inconsiderable attention of responsible organizations about this problem. As BienHoa was selected as a case-study for PCDD/Fs transfer in food chain, using statistic methods (cluster analysis and Principal Component Analysis - PCA), we have showed a high similarity of PCDD/Fs profiles pattern between BienHoa Airforce Base soils, BienHung Lake sediments and fish tissue. The similarity in PCDD/Fs relative i-TEQ profiles between MWIs bottom ash and soil of industrial zone ThuDuc proves that industrial and municipal combustions are responsible sources for PCDD/Fs in the soil of such these zones. However in comparison with the sites contaminated by Agent Orange (A.O)/Dioxin, the PCDD/Fs contamination level in the industrial soil is lower and mainly dominated by PCDFs than PCDDs. The result also showed comparables i-TEQ values in BienHoa residents with inhabitants of industrial countries, however Vietnam is only developing and agricultural country. Beside that, 2,3,7,8-TCDD has been detected in many tested cases. 2,3,7,8-TCDD is the most toxic compound and related to the A.O/Dioxins from the war, unfortunately we have not enough data to assess the relationship between A.O/Dioxin residue and these samples. To find out this relationship it is necessary an integrated large-scale investigation. Result of our research serves as a base for set-up a reference laboratory for PCDD/Fs and dioxin-liked compounds research in the South of Vietnam. At present time, a small laboratory for PCDD/Fs analysis has been installed in IER and serves as a member of VietNam Dioxin Research Network
GROUNDWATER TREATMENT TECHNOLOGIES FOR THE NATIONAL PROGRAM "CLEAN WATER AND ENVIRONMENTAL SANITARY" OF HOCHIMINH CITY AND SOUTHERN PROVINCES
Joint Research on Environmental Science and Technology for the Eart
Synthesis of Gold Nanoparticles Conjugated with Protein A: Towards the Application in Biosensors for Virus Detection
In this article, a facile and effective technique is described to prepare a complex of gold nanoparticles (GNPs)/protein A (PrA) for biosensors in virus detection. GNPs were synthesized by the reduction of tetrachloroauric (III) acid trihydrate using sodium ascorbate, and then coated with PrA via ultracentrifugation. The complex of GNPs/PrA was characterized using UV-vis spectroscopy and transmission electron microscopy. The immunogold labeling method of scanning electron microscopy was also used to verify the capacity for the detection and binding of GNPs/PrA to HN influenza A virus particles. The results showed that GNPs were spherical, uniform shape, and approximately 10 nm in size. Noticeably, the complex of GNPs/PrA could detect and bind effectively to HN influenza A virus particles by a large number of GNPs surrounded. The advantage of the complex of GNPs/PrA showed a highly potential application in biosensors with the improvement of the sensitivity and transducing signal for virus detection
The Laser MicroJet® (LMJ) - A multi-solution technology for high quality micro-machining
The field of laser micromachining is highly diverse. There are many different types of lasers available in the market. Due to their differences in irradiating wavelength, output power and pulse characteristic they can be selected for different applications depending on material and feature size [1], The main issues by using these lasers are heat damages, contamination and low ablation rates, This report examines on the application of the Laser MicroJet® (LMJ), a unique combination of a laser beam with a hair-thin water jet as a universal tool for micro-machining of MEMS substrates, as well as ferrous and non-ferrous materials. The materials include gallium arsenide (GaAs) & silicon wafers, steel, tantalum and alumina ceramic. A Nd:YAG laser operating at 1064 nm (infra red) and frequency doubled 532 nm (green) were employed for the micro-machining of these materials
Research on microstructure and mechanical properties of Al-Zn-Mg-Cu alloy when modified by La, Ce and thermo-mechanical treatment
Influence of rare-earth (La, Ce) and thermo-mechanical treatment on microstructure and mechanical properties of Al-Zn-Mg-Cu alloy are presented in this article. After casting, the alloy which was modified by La, Ce, the grain size of samples obtained around 40–50 µm compared to that of without about 65 µm; and after homogeneous, the grain sizes is about 30 µm. After the cold deformation process, the distance between plates is 10 µm. By EDS after casting, the samples have tended to more La, Ce elements at the grain boundary, after homogeneous, the uniformation distribution of rare-earths was presented by mapping of EDS’s results. In addition, after rolling and heat treatment, the elements were found on the grain boundary and matrix. After recrystallization annealing, the grain size is around 10 µm with the modification sample. The grain size was reduced by two processes of modification as well as thermal-mechanical treatment is a condition for increasing the ductility of the studied alloy. Further, as a result of ability deformation from the tensile test, these results demonstrate that the tensile test obtained 140 % when adding La, Ce contents into the alloy combine with thermal-mechanical treatment. The combined used of La, Ce and thermal-mechanical treatment have increased the ductility of Al-Zn-Mg-Cu allo
Ecological Engineering and Restoration of Eroded Muddy Coasts in South East Asia: Knowledge Gaps and Recommendations
Ecological engineering (EE) was employed for developing strategies for stabilizing eroded muddy coasts (EMCs). However, there was a limited analysis of these EE strategies with respect to design, performance, and lessons learned. This study employed a critical review for addressing the limitations. There were four EE models designed with different restoration interventions for stabilizing EMCs. The models using active interventions have not been cost-effective in controlling erosion because the interventions failed to achieve their goals or were costly and unnecessary. Of the two passive intervention models, the one with structures constructed from onshore proved to be more cost-effective in terms of construction costs, the survival rate of transplanted seedlings, and levels of sea mud accumulation. Interventions with adequate consideration of the muddy coastal ecological processes and the ecological reasoning for the positioning of these interventions play a crucial role in stabilizing EMCs. A passive restoration model using gradually expanded interventions should be promoted in order to ensure sustainable management of EMCs in the future
Study on structure of the Earth’s crust in Thua Thien-Hue province and adjacent areas by using gravity and magnetic data in combination
This paper presents the structural characteristics of the Earth’s crust in Thua Thien-Hue province and adjacent area based on interpretation of gravity and magnetic data in combination. Research results have shown that: The depth of crystalline basement varies complicatedly, in the range of 0–11 km. The depth of Conrad surface increases from Northeast (12 km) to Southwest (18 km) and the depth of Moho surface is 23–34 km; The density of sedimentary layer changes from 2.61 g/cm3 to 2.65 g/cm3. Meanwhile, the density of granitic layer is in the range of 2.68–2.73 g/cm3. The basaltic layer has the density value of 2.88–2.93 g/cm3 and the average density of lower layer of the Earth’s crust is about 3.30 g/cm3; The depth of second-order faults, Red River and A Luoi - Rao Quan, is through the Earth’s crust. Meanwhile, the depth of influence of third-order faults, Chay river, Dong Ha - Phu Vang, Vinh Linh, Hue - Son Tra and Tam Ky - Phuoc Son, is within the thickness of the Earth’s crust
- …