A new data reduction scheme to obtain the mode II fracture properties of Pinus Pinaster wood

In this work a numerical study of the End Notched Flexure (ENF) specimen was performed in order to obtain the mode II critical strain energy released rate (GIIc) of a Pinus pinaster wood in the RL crack propagation system. The analysis included interface finite elements and a progressive damage model based on indirect use of Fracture Mechanics. The difficulties in monitoring the crack length during an experimental ENF test and the inconvenience of performing separate tests in order to obtain the elastic properties are well known. To avoid these problems, a new data reduction scheme based on the equivalent crack concept was proposed and validated. This new data reduction scheme, the Compliance-Based Beam Method (CBBM), does not require crack measurements during ENF tests and additional tests to obtain elastic properties.FCT - POCTI/EME/45573/200

Finite element analysis of the ECT test on mode III interlaminar fracture of carbon-epoxy composite laminates

In this work a parametric study of the Edge Crack Torsion (ECT) specimen was performed in order to maximize the mode III component (GIII) of the strain energy release rate for carbon-epoxy laminates. A three-dimensional finite element analysis of the ECT test was conducted considering a [90/0/(+45/-45)2/(-45/+45)2/0/90]S lay-up. The main objective was to define an adequate geometry to obtain an almost pure mode III at crack front. The geometrical parameters studied were specimen dimensions, distance between pins and size of the initial crack. The numerical results demonstrated that the ratio between the specimen length and the initial crack length had a significant effect on the strain energy release rate distributions. In almost all of the tested configurations, a mode II component occurred near the edges but it did not interfere significantly with the dominant mode III state.FCT - POCTI/EME/45573/200

Momentum Space Regularizations and the Indeterminacy in the Schwinger Model

We revisited the problem of the presence of finite indeterminacies that appear in the calculations of a Quantum Field Theory. We investigate the occurrence of undetermined mathematical quantities in the evaluation of the Schwinger model in several regularization scenarios. We show that the undetermined character of the divergent part of the vacuum polarization tensor of the model, introduced as an {\it ansatz} in previous works, can be obtained mathematically if one introduces a set of two parameters in the evaluation of these quantities. The formal mathematical properties of this tensor and their violations are discussed. The analysis is carried out in both analytical and sharp cutoff regularization procedures. We also show how the Pauli Villars regularization scheme eliminates the indeterminacy, giving a gauge invariant result in the vector Schwinger model.Comment: 10 pages, no figure

Plantas medicinais e aromáticas como defensivos naturais.

201

Phase Transition and Monopoles Densities in a Nearest Neighbors Two-Dimensional Spin Ice Model

In this work, we show that, due to the alternating orientation of the spins in the ground state of the artificial square spin ice, the influence of a set of spins at a certain distance of a reference spin decreases faster than the expected result for the long range dipolar interaction, justifying the use of the nearest neighbor two dimensional square spin ice model as an effective model. Using an extension of the model presented in ref. [Scientific Reports 5, 15875 (2015)], considering the influence of the eight nearest neighbors of each spin on the lattice, we analyze the thermodynamics of the model and study the monopoles and string densities dependence as a function of the temperature.Comment: 11 pages, 8 figure

Dynamics of topological defects in a spiral: a scenario for the spin-glass phase of cuprates

We propose that the dissipative dynamics of topological defects in a spiral state is responsible for the transport properties in the spin-glass phase of cuprates. Using the collective-coordinate method, we show that topological defects are coupled to a bath of magnetic excitations. By integrating out the bath degrees of freedom, we find that the dynamical properties of the topological defects are dissipative. The calculated damping matrix is related to the in-plane resistivity, which exhibits an anisotropy and linear temperature dependence in agreement with experimental data.Comment: 4 pages, as publishe

Phase Transition in Asymmetrical Superfluids I: Equal Fermi Surfaces

In this paper, we study phase transitions in asymmetrical fermion superfluids. In this scenario, the candidates to form pair are particles with mismatched masses and chemical potentials. We derive an expression for the critical temperature in terms of the gap and masses (or chemical potentials) when the constraint of equal Fermi surfaces $m_a\mu_a = m_b\mu_b$ is imposed.Comment: RevTex, 11 pages, 2 figures, typos corrected and an appendix added, accepted for publication in Phys. Rev.

Influência da adubação verde e diferentes adubos orgânicos na produção de fitomassa aérea de atroveran.

Resumo: Este trabalho teve por objetivo verificar o efeito de diferentes adubos orgânicos em associação ou não com adubo verde na produção de folhas de Ocimum selloi Benth., planta nativa do Brasil. O experimento foi conduzido na área experimental da Embrapa Meio Ambiente (CNPMA), localizado no município de Jaguariúna, em duas áreas distintas, sendo uma delas submetidas anteriormente ao plantio e incorporação de adubo verde (Crotalaria juncea). Os tratamentos utilizados foram: T1 - testemunha (solo sem adubação), T2 - cama de aviário (5 kg/m2), T3 - hidrolisado de peixe (produto comercial Fishfértil - 5 mL/m2) e T4 - composto orgânico (4 kg/m2). A colheita foi realizada 180 dias após o plantio, em Janeiro de 2011, sendo colhidas as plantas úteis (quatro plantas por parcela). Avaliou-se o rendimento de fitomassa fresca e seca. O delineamento experimental adotado foi o esquema fatorial 2x4, com quatro repetições (blocos). As médias obtidas foram submetidas à análise de variância seguida de teste de médias (Tukey). Com base nos resultados obtidos, pode-se concluir que a cama de aviário apresentou resultados mais satisfatórios quanto à produção de folhas de Ocimum selloi quando comparados aos demais tratamentos orgânicos, não observando-se incremento nos resultados pela associação com o adubo verde Crotalaria juncea. Abstract: Influence of green manure and different organic manure on production of aereal phytomass of Ocimum selloi. The aim of this work was to avail the effect of different manures in association or nor with green manure on yield of leaves of Ocimum selloi Benth. The assay was accomplished on experimental area of Embrapa Environmental (Jaguariúna district), at two different spaces (with or without green manure Crotalaria juncea). The treatments used were: T1 - witness (no manure), T2 - chicken manure (5 kg/m2), T3 - commercial product Fishfértil - 5 mL/m2) and T4 - composting (4 kg/m2). The cut was realized on 180 days after the planting (January - 2011), and were collected four plants/ plot. The yield of dried and fresh Ocimum selloi phytomass was availed. The experimental design was factorial scheme (2x4), with four repetitions. The treatment with chicken manure showed best results on treatments, but did not was influence by using Crotalaria juncea