A comparison of vegetable leaves and replicated biomimetic surfaces on the binding of Escherichia coli and Listeria monocytogenes

Biofouling in the food industry is a huge issue, and one possible way to reduce surface fouling is to understand how naturally cleaning surfaces based on biomimetic designs influence bacterial binding. Four self-cleaning leaves (Tenderheart cabbage, Cauliflower, White cabbage and Leek) were analysed for their surface properties and artificial re-plicates were produced. The leaves and surfaces were subjected to attachment, adhesion and retention assays using Escherichia coli and Listeria monocytogenes. For the attachment assays, the lowest cell numbers occurred on the least hydrophobic and smooth surfaces but were higher than the flat control surface, regardless of the strain. Following the ad-hesion assays, using L. monocytogenes, the Tenderheart and Cauliflower biomimetic re-plicated leaves resulted in significantly lowered cell adhesion. Following the retention assays, White cabbage demonstrated lower cell retention for both types of bacteria on the biomimetic replicated surface compared to the flat control surface. The biomimetic sur-faces were also more efficient at avoiding bacterial retention than natural leaves, with reductions of about 1 and 2 Log in L. monocytogenes and E. coli retention, respectively, on most of the produced surfaces. Although the surfaces were promising in reducing bac-terial binding, the results suggested that different experimental assays exerted different influences on the conclusions. This work demonstrated that consideration needs to be given to the environmental factors where the surface is to be used and that bacterial species influence the propensity of biofouling on a surface. (c) 2022 The Author(s). Published by Elsevier Ltd on behalf of Institution of Chemical Engineers. This is an open access article under the CC BY license (http://creative-commons.org/licenses/by/4.0/)

Lateral force removal of fungal spores to demonstrate how surface properties affect fungal spore retention

Microbial biofouling on polymer surfaces can lead to their biodeterioration. This may result in deterioration of the surface, leading to cracking and fracturing. Fungal spores from Aspergillus niger 1957, Aspergillus niger 1988 and Aureobasidium pullulans were tested to determine their strength of attachment on three surfaces, p(γ-MPS-co-MMA), p(γ-MPS-co-LMA) and spin-coated poly(methyl methacrylate) (PMMAsc), using lateral force measurements. The results demonstrate that A. niger 1957 and A. niger 1988 spores were most easily removed from the p(γ-MPS-co-MMA) surface, which was the surface with the highest R a value. The A. niger 1957 and A. pullulans spores were most difficult to remove from the PMMAsc surface, which was the hardest surface. A. niger 1988 spores were the most difficult to remove from p(γ-MPS-co-LMA), the most hydrophobic surface. The results with A. pullulans were difficult to elucidate since the spores bound to all three surfaces and were removed with similar rates of force. The lateral force results demonstrate that spore attachment to a surface is a multi-factorial process, and independent surface and microbial factors influence spore binding. Thus, each environmental scenario needs to be considered on an individual basis, since a solution to one biofouling issue will probably not translate across to other systems. This article is part of the theme issue 'Nanocracks in nature and industry'

Surface modification of platelet concentrate bags to reduce biofilm formation and transfusion sepsis.

Bacterial contamination of blood products poses a major risk in transfusion medicine, including transfusions involving platelet products. Although testing systems are in place for routine screening of platelet units, the formation of bacterial biofilms in such units may decrease the likelihood that bacteria will be detected. This work determined the surface properties of p-PVC platelet concentrate bags and investigated how these characteristics influenced biofilm formation. Serratia marcescens and Staphylococcus epidermidis, two species commonly implicated in platelet contamination, were used to study biofilm growth. The platelet concentrate bags were physically flattened to determine if reducing the surface roughness altered biofilm formation. The results demonstrated that the flattening process of the platelet bags affected the chemistry of the surface and reduced the surface hydrophobicity. Flattening of the surfaces resulted in a reduction in biofilm formation for both species after 5 days, with S. marcescens demonstrating a greater reduction. However, there was no significant difference between the smooth and flat surfaces following 7 days’ incubation for S. marcescens and no significant differences between any of the surfaces following 7 days’ incubation for S. epidermidis. The results suggest that flattening the p-PVC surfaces may limit potential biofilm 2 formation for the current duration of platelet storage time of 5 days. It is hoped that this work will enhance the understanding of how surface properties influence the development of microbial biofilms in platelet concentrate bags in order to devise a solution to discourage biofilm formation

The Effect of Human Blood Plasma Conditioning Films on Platelet Transfusion Bag Surface Properties

Transfusion-associated bacterial infections continue to occur which may be due to the formation of bacterial biofilms on the inner surface of the blood bag. Plasticized poly (vinyl chloride) (p-PVC) platelet storage bags in three surface roughness states (rough, smooth and flattened) were used to determine the effect that a conditioning film (CF) of human plasma had on surface properties and its interaction with Staphylococcus epidermidis and Serratia marcescens. SEM and optical profilometry determined changes in surface roughness, whilst EDX and ATR-FTIR determined surface chemistry. The physicochemistry of the surfaces and bacteria was assessed using contact angle measurements and MATH assays respectively. When applied to a rougher surface, the CF reduced the surface topography, masked certain surface chemistry features and made the surfaces more hydrophilic. The CF reduced the adhesion of the bacteria to most of the hydrocarbons. When human plasma was combined with bacteria, most of the physicochemical properties changed similarly to those of human plasma alone, with the most significant changes observed after 24 h especially with Ser. marcescens. The results demonstrated that the presence of human plasma had a significant effect on the surface properties of the platelet bags and also on microbial interactions with the bag surface

The detection and quantification of food components on stainless steel surfaces following use in an operational bakery

© 2019 Institution of Chemical Engineers Food preparation areas in commercial bakeries present surfaces for continual organic fouling. The detection of retained food components and microorganisms on stainless steel surfaces situated for one month in the weighing in area, pastry and confectionary production areas of a bakery were investigated using different methods. Scanning electron microscopy demonstrated the morphology of the material on the surfaces from all three areas, with the weighing in area demonstrating a more even coverage of material. Differential staining assays demonstrated a high percentage coverage of organic material heterogeneously distributed across the surfaces. Differential staining also demonstrated that the amount of organic material on the surface from the confectionary area was significantly greater than from both the pastry and weighing in areas. Although, UV at 353 nm did not detect residual surface fouling, performance of the UV detection was optimised and demonstrated that the residual organic material on the weighing in area and the pastry samples was best illuminated at 510–560 nm, and from the confectionary area of the bakery at 590–650 nm. ATP bioluminescence revealed the confectionary production area contained the highest level of biofouling. Contact plates determined that only low microbial counts (≤2 CFU/cm2) were recovered from the surfaces. Changes in the physicochemistry (increased hydrophobicity) demonstrated that all the surfaces were fouled (ΔGiwi −26.8 mJ/m2 to −45.4 mJ/m2). Fourier Transform Infra-Red Spectroscopy (FTIR) demonstrated that all the surfaces had retained fats, carbohydrates and proteins. This work suggests that a range of methods may be needed to fully detect organic and microbial fouling

Nano-layered inorganic-organic hybrid materials for the controlled delivery of antimicrobials

An essential oil (EO) blend has been identified that provides a broad spectrum potent antimicrobial effect. Adsorption of the EO onto porous silicate materials (Rockwood Additives: Laponite® B, Laponite® RD and Fulcat® 800) and has been analysed and it was found that Laponite® RD organically modified with dihydrogenated tallow dimethyl ammonium chloride (2HT2M) at 50% cation exchange capacity gave the highest levels of adsorption. The Laponite® RD 2HT2M with EO blend adsorbed has been added to polymer materials to produce an antimicrobial polymer. The adsorption of the EO onto the Laponite® RD was done to achieve controlled release of the EO to prolong the antimicrobial effect within the polymer. Addition of the EO loaded substrates into silicone elastomer has resulted in successfully conferring a high level of antimicrobial activity to the polymer. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Photochemistry and photopolymerisation of substituted 2-methylanthraquinones and novel 2-acryloxymethylanthraquinone in radiation curing

© 2018 Elsevier B.V. Anthraquinones have been the subject of numerous photochemical studies and their photopolymerization activities have been examined under various conditions to improve more efficient photochemical systems. This article involves further detailed investigations into the photophysical, photochemistry and photopolymerisation properties of 4 commercial derivatives of 2-substituted anthraquinone, namely, 2-Bromomethylanthraquinone (2BA), 2 Chloromethylanthraquinone (2CA), 2 Ethylanthraquinone (2EA), 2 Hydroxymethylanthraquinone (2HA) and one novel synthesized anthraquinone, 2 Acryloxymethylanthraquinone (2AA). 2AA is synthesized from 2HA. The results from both spectroscopic and analysis studies proved the 2AA to having the ester link. Absorption spectroscopy and solvent shift data are used to characterise their spectral activity. Luminescence studies involving fluorescence and phosphorescence analysis indicates efficient intersystem crossing to triplet state and n-π* nature of the lowest excited triplet state. The polymerisation activity was studied using methyl methacrylate (MMA) and analysis of the cure rate was measured using the gravimetric method. All the compounds are shown to be highly dependent on the structure. However, the rate of polymerisation (Rp) was reduced in the presence of amine. This is consistent with other results, proving the behaviour of derivatives with n-π* configuration. Hardness tests for all compounds took place using a different formula of acrylated resin/monomer systems. The excited state characteristics of the methyl derivatives have also been examined using micro and nanosecond flash photolysis. Triplet absorption spectra of all the anthraquinone derivatives show a significant red shift in the region of 340–370 nm with increasing solvent polarity due to stabilisation of the lowest triplet state by solvent reorganization. Hydrogen atom abstraction takes place in 2 propanol, forming a semiquinone radical. In the presence of the tertiary amine, triethylamine, all anthraquinone derivatives show the formation of intermediary species related to either the exciplex or the radical ion pair. Under aerobic conditions, the first decay rate for all anthraquinone derivatives increases and showed oxygen to be a good quencher with a bimolecular rate constant of around 2 × 10 8 mol. dm −3 s −1 . Relative to benzophenone, the molar absorption coefficient, ε, and quantum yield of intersystem crossing, Φisc were calculated, and it is summarised that the value for Φisc for all compound is less than 1.00 and controls to a major extent their photochemical activities

Chemiluminescence studies on comparison of antioxidant effectiveness on multiextruded polyethylenes

Several polyethylene resins; high density polyethylene (Ph-HDPE, Phillips metal oxide catalyst) and linear low density polyethytlenes (LLDPE, formed using Ziegler–Natta catalyst and metallocene catalyst technology, m-LLDPE) were used in order to acquire an insight in to the effect of different polymerization catalyst systems on the melt stabilization performance of single AO. Chemiluminescence (CL) and melt flow rate (MFR) were used to analyze the degradation as a function of the number of passes through a twin-screw extruder. A good correlation was obtained, and the additives resulting with the best melt flow stability in the polymer were the same as those that promote the best CL results

Use of spherical particles to understand conidial attachment to surfaces using atomic force microscopy

Binding of particles and spores to surfaces is a natural phenomenon which is a prerequisite for biofilm formation. Perpendicular force measurements were carried out using atomic force microscopy cantilevers modified with a polystyrene or glass sphere. The attachment of the spheres was tested against glass, PVAc, p(γ-MPSco-MMA), p(γ-MPS-co-LMA), PMMAsc, and silicon surfaces. The polystyrene spheres demonstrated less varied force and strength of attachment measurement to the surfaces than the glass spheres. The force of attachment of the polystyrene spheres was also influenced by mobility of the co-polymer surfaces. Surface wettability did not affect the force of polystyrene or glass sphere attachment. The force measurements of the non-biological spheres were similar to those seen in biological systems with fungal conidia, and this was due to their size, shape, and binding energies. The use of non-biological systems may present an insight into understanding the fundamentals of more complex biological processes

A comparison of vegetable leaves and replicated biomimetic surfaces on the binding of Escherichia coli and Listeria monocytogenes

Biofouling in the food industry is a huge issue, and one possible way to reduce surface fouling is to understand how naturally cleaning surfaces based on biomimetic designs influence bacterial binding. Four self-cleaning leaves (Tenderheart cabbage, Cauliflower, White cabbage and Leek) were analysed for their surface properties and artificial replicates were produced. The leaves and surfaces were subjected to attachment, adhesion and retention assays using Escherichia coli and Listeria monocytogenes. For the attachment assays, the lowest cell numbers occurred on the least hydrophobic and smooth surfaces but were higher than the flat control surface, regardless of the strain. Following the adhesion assays, using L. monocytogenes, the Tenderheart and Cauliflower biomimetic replicated leaves resulted in significantly lowered cell adhesion. Following the retention assays, White cabbage demonstrated lower cell retention for both types of bacteria on the biomimetic replicated surface compared to the flat control surface. The biomimetic surfaces were also more efficient at avoiding bacterial retention than natural leaves, with reductions of about 1 and 2 Log in L. monocytogenes and E. coli retention, respectively, on most of the produced surfaces. Although the surfaces were promising in reducing bacterial binding, the results suggested that different experimental assays exerted different influences on the conclusions. This work demonstrated that consideration needs to be given to the environmental factors where the surface is to be used and that bacterial species influence the propensity of biofouling on a surface