5,817 research outputs found
Joint analysis of TeV blazar light curves with FACT and HAWC
Probing the high energy emission processes of blazars through their
variability relies crucially on long-term monitoring. We present unprecedented
light curves from unbiased observations of very high energy fluxes from the
blazars Mrk 421 and Mrk 501 based on a joint analysis of data from the First
G-APD Cherenkov Telescope (FACT) and the High Altitude Water Cherenkov (HAWC)
Observatory. Thanks to an offset of 5.3 hours of the geographic locations, a
complementary coverage of up to 12 hours of observation per day allows us to
track variability on time scales of hours to days in more detail than with
single-instrument analyses. Complementary features, such as better sensitivity
thanks to a lower energy threshold with FACT and more regular coverage
throughout the year with HAWC, provide valuable cross checks and extensions to
the individual analyses. Daily flux comparisons for both Mrk 421 and Mrk 501
show largely correlated variations with a few significant exceptions. These
deviations between measurements can be explained through fast variability
within a few hours and will be discussed in detail.Comment: Presented at the 35th International Cosmic Ray Conference (ICRC2017),
Bexco, Busan, Korea. See arXiv:1708.02572 for all HAWC contribution
Estimates of prevalence, demographic characteristics and social factors among people with disabilities in the USA: a cross-survey comparison
Objective: A national priority for disability research in the USA is the standardised identification of people with disabilities in surveillance efforts. Mandated by federal statute, six dichotomous difficulty-focused questions were implemented in national surveys to identify people with disabilities. The aim of this study was to assess the prevalence, demographic characteristics and social factors among people with disabilities based on these six questions using multiple national surveys in the USA.
Setting: American Community Survey (ACS), Current Population Survey Annual Social and Economic Supplement (CPS-ASEC), National Health Interview Survey (NHIS) and the Survey of Income and Program Participation (SIPP).
Participants: Civilian, non-institutionalised US residents aged 18 and over from the 2009 to 2014 ACS, 2009 to 2014 CPS-ASEC, 2009 to 2014 NHIS and 2008 SIPP waves 3, 7 and 10.
Primary and secondary outcome measures: Disability was assessed using six standardised questions asking people about hearing, vision, cognition, ambulatory, self-care and independent living disabilities. Social factors were assessed with questions asking people to report their education, employment status, family size, health and marital status, health insurance and income.
Results: Risk ratios and demographic distributions for people with disabilities were consistent across survey. People with disabilities were at decreased risk of having college education, employment, families with three or more people, excellent or very good self-reported health and a spouse. People with disabilities were also consistently at greater risk of having health insurance and living below the poverty line. Estimates of disability prevalence varied between surveys from 2009 to 2014 (range 11.76%–17.08%).
Conclusion: Replicating the existing literature, we found the estimation of disparities and inequity people with disabilities experience to be consistent across survey. Although there was a range of prevalence estimates, demographic factors for people with disabilities were consistent across surveys. Variations in prevalence estimates can be explained by survey context effects
Destiny: A Candidate Architecture for the Joint Dark Energy Mission
Destiny is a simple, direct, low cost mission to determine the properties of
dark energy by obtaining a cosmologically deep supernova (SN) type Ia Hubble
diagram. Operated at L2, its science instrument is a 1.65m space telescope,
featuring a grism-fed near-infrared (NIR) (0.85-1.7micron) survey
camera/spectrometer with a 0.12 square degree field of view. During its
two-year primary mission, Destiny will detect, observe, and characterize ~3000
SN Ia events over the redshift interval 0.4<z<1.7 within a 3 square degree
survey area. In conjunction with ongoing ground-based SN Ia surveys for z<0.8,
Destiny mission data will be used to construct a high-precision Hubble diagram
and thereby constrain the dark energy equation of state from a time when it was
strongly matter-dominated to the present when dark energy dominates. The
grism-images simultaneously provide broad-band photometry, redshifts, and SN
classification, as well as time-resolved diagnostic data for investigating
additional SN luminosity diagnostics. Destiny will be used in its third year as
a high resolution, wide-field imager to conduct a multicolor NIR weak lensing
(WL) survey covering 1000 square degrees. The large-scale mass power spectrum
derived from weak lensing distortions of field galaxies as a function of
redshift will provide independent and complementary constraints on the dark
energy equation of state. The combination of SN and WL is much more powerful
than either technique on its own. Used together, these surveys will have more
than an order of magnitude greater sensitivity than will be provided by ongoing
ground-based projects. The dark energy parameters, w_0 and w_a, will be
measured to a precision of 0.05 and 0.2 respectively.Comment: Contains full color figure
Optical and other property changes of M-50 bearing steel surfaces for different lubricants and additive prior to scuffing
An ester lubricant base oil containing one or more standard additives to protect against wear, corrosion, and oxidation was used in an experimental ball/plate elastohydrodynamic contact under load and speed conditions such as to induce scuffing failure in short times. Both the ball and the plate were of identically treated M-50 steel. After various periods of operating time the wear track on the plate was examined with an interference microscope of plus or minus 30 A depth resolution and sometimes also with a scanning ellipsometer and an Auger spectrometer. The optically deduced surface profiles varied with wavelength, indicating the presence of surface coatings, which were confirmed by the other instruments. As scuffing was approached, a thin (approximately A) oxide layer and a carbide layer formed in the wear track in particular when tricresylphosphate antiwear additive was present in the lubricant. The rates of the formation of these layers and their reactivity toward dilute alcholic HCl depended strongly on the lubricant and additives. Based on these results suggestions for improved formulations and a test method for bearing reliability could be proposed
Emission FTIR analyses of thin microscopic patches of jet fuel residues deposited on heated metal surfaces
The relationship of fuel stability to fuel composition and the development of mechanisms for deposit formation were investigated. Fuel deposits reduce heat transfer efficiency and increase resistance to fuel flow and are highly detrimental to aircraft performance. Infrared emission Fourier transform spectroscopy was chosen as the primary method of analysis because it was sensitive enough to be used in-situ on tiny patches of monolayers or of only a few molecular layers of deposits which generally proved completely insoluble in any nondestructive solvents. Deposits of four base fuels were compared; dodecane, a dodecane/tetralin blend, commercial Jet A fuel, and a broadened-properties jet fuel particularly rich in polynuclear aromatics. Every fuel in turn was provided with and without small additions of such additives as thiophene, furan, pyrrole, and copper and iron naphthenates
Emission FTIR analyses of thin microscopic patches of jet fuel residue deposited on heated metal surface
Deposits laid down in patches on metal strips in a high pressure/high temperature fuel system simulator operated with aerated fuel at varying flow rates were analyzed by emission FTIR in terms of functional groups. Significant differences were found in the spectra and amounts of deposits derived from fuels to which small concentrations of oxygen-, nitrogen-, or sulfur-containing heterocyclics or metal naphthenates were added. The spectra of deposits generated on strips by heating fuels and air in a closed container were very different from those of the flowing fluid deposits. One such closed-container dodecane deposit on silver gave a strong surface-enhanced Raman spectrum
Determination of physical and chemical states of lubricants in concentrated contacts, part 3
Solid and liquid thin films were analyzed by infrared emission Fourier microspectrophotometry. The apparatus used is a commercial absorption instrument modified to an emission instrument, comprising a rotating polarizing device, a miniature blackbody temperature reference adjustable in temperature and radiant flux and a microscope lens with a high numerical aperture in the entrance system for increased sensitivity and resolution. Studies of lubricant behavior in a simulated ball bearing showed the alignment of the fluid molecules in the Hertzian area. Polyphenyl ether plus 1% 1,1,2-trichloroethane (TCE) required lower shear rates for the same degree of alignment than without TCE. The experiment was run with 440 C stainless steel balls coated with TiN, a chemically inert material. In both cases, the alignment was strongly influenced by the presence of TCE. The results showed (1) the dependence of alignment of fluid molecules on flow and not on adsorption at metallic surfaces, (2) phase separation between lubricant and additive under high pressure which results in two phase flow and (3) reduction in traction of torque transmitting (traction) fluids
Infrared analysis of polyethylene wear specimens using attenuated total reflection spectroscopy
Attenuated total reflection infrared spectroscopy was used to analyze ultrahigh molecular weight polyethylene wear test specimens. Three different specimens were analyzed. One specimen was gamma irradiated to a dose of 5.0 MRad, another to a dose of 2.5 MRad, and the final specimen was unirradiated. There was no conclusive evidence of chemical changes (i.e., unsaturation or oxidation) in the surface regions of any of the polyethylene samples. Therefore, it was concluded that the gamma irradiation sterilization procedure shoud not alter the boundary lubricating properties of the polyethylene
- …