661 research outputs found
A discrete conservative model for the linear vibrating string and rod
AbstractIn this paper, we shall suggest and study a conservative discrete model for the linear vibrating string and rod fixed at the end points. We shall prove that the difference systems involved in our models may be seen as second-order unconditionally stable finite difference schemes of the classical equations of the linear vibrating string and vibrating rod. If the forces acting on the string (or rod) are conservative the total energy of the discrete solutions of our models is conserved and we can prove that we have stability for every choice of the time step Δt. We have considered both hinged and clamped rod; the constrains are naturally included into the model and the conservation of energy is still proved by giving a suitable definition of potential energy. Some numercial examples are presented
Testability of Switching Lattices in the Cellular Fault Model
A switching lattice is a two-dimensional array of four-terminal switches implemented in its cells. Each switch is linked to the four neighbors and is connected with them when the switch is ON, or is disconnected when the switch is OFF. Recently, with the advent of a variety of emerging nanoscale technologies based on regular arrays of switches, lattices of multi-terminal switches, originally introduced by Akers in 1972, have found a renewed interest. In this paper, the testability under the Cellular Fault Model (CFM) of switching lattices is defined and analyzed. Moreover, some techniques for improving the testability of lattices are discussed and experimentally evaluated
DESIGN AND SYNTHESIS OF HIGH DENSITY INTEGRATED CIRCUITS
Gordon E. Moore, a co-founder of Fairchild Semiconductor, and later of Intel, predicted that after 1980 the complexity of an Integrated Circuit would be expected to double every two years.
The prevision made by Moore held for decades, for this reason it is also called \u201cMoore\u2019s law\u201d.
The trend in ICs is driven by a reduction of area and power consumption. Today scaled CMOS technologies are the main solution for digital processing. However, the interconnection scaling is not optimal. At every new technology node, the number of metal layers and their thickness increases, exploiting the vertical direction. The reduction of the minimum distance between interconnections and the growth in vertical dimension increase the parasitic capacitance
and consequently the dynamic power consumption. Moreover, due to the non-optimal scaling of the interconnections, signal routing is becoming more and more challenging at every technology node advancement. Very scaled technologies make possible to reach a great transistor density.
However, the design must comply to strict rules for metal interconnections.
The aim of this thesis is to find possible solutions to the disadvantages of scaled CMOS technologies. This goal is obtained in two different ways: using ad-hoc design techniques on today CMOS technologies and finding new approaches to logic synthesis of nanocrossbars, that are an emerging post-CMOS technology. The two approaches used corresponds to the two parts of this thesis.
The first part presents the design of an Associative Memory focusing the attention on develop design and logic synthesis techniques to reduce power consumption. The field of applicability of AMs is real-time pattern-recognition tasks. The possible uses range from scientific calculations to image processing for intelligent autonomous devices to image reconstruction for electro-medical apparatuses. In particular AMs are used in High Energy Physics (HEP) experiments to detect particle tracks. HEP experiments generate a huge amount of data, but it is necessary to select and save only the most interesting tracks. Being the data compared in parallel, AMs are synchronous ICs that have a very peaked power consumption, and therefore it is necessary to minimize the power consumption. This AM is designed within the projects IMPART and HTT in 28 nm CMOS technology, using a fully-CMOS approach. The logic is based on the propagation of a \u201ckill signal\u201d that, if one of the bits in a word is not matching, inhibits the switching of the following cells. Thanks to this feature, the designed AM array consumes less than 0.7 fJ/bit. A prototype has been fabricated and it has proven to be functional. The final chip will be installed in the data acquisition chain of ATLAS experiment on HL-LHC at CERN.
In the future nanocrossbars are expected to reduce device dimensions and interconnection complexity with respect to CMOS. Logic functions are obtained with switching lattices of four-terminal switches. The research activity on nanocrossbars is done within the project NANOxCOMP.
To improve synthesis are used some algorithmic approaches based on Boolean function decomposition and regularities, in particular P-circuits, EXOR-Projected Sums of Products (EP-SOP), Dimension-reducible (D-red) functions and autosymmetric functions. The decomposed functions are implemented into lattices using internal and external decomposition methods.
Experimental results show that this approaches reduce the complexity of the single synthesis problem and leads, in average, to a reduction of lattice area and synthesis time. Lattices are made of self-assembled structures and they have a non-negligible defectivity ratio. To cope with this limitation, some techniques to reduce sensitivity to defects have been studied
Uncertainty quantification to assess a reduced model for the remote heating of a polymer
This article studies the feasibility of a 1D radiative transfer model to compute the thermal source for a remote heating problem associated to the physics of the so-called plasmonic resonance (PR) in a synthetic polymeric material. The PR is responsible for converting the optical radiation from the incident laser beam into an equivalent thermal source and is achieved by embedding gold nanoparticles during the design of the synthetic polymer. Since the Radiative Transfer Equation cannot be analytically solved for a real experimental case, a two-staged simplified process is considered which requires the uncertainty quantification as a prior stage, in order to make an appropriate control of the resulting temperature profile. In this work, we include propagation errors for lattices of 1D, 2D and 3D geometries, due to the approximate laser source profile used, as well as those arisen from uncertainties in the thermal parameters and the ones derived from the variables involved in the design of the polymer. Computational simulations for a suitable experimental polymer are carried out using COMSOL®. Corresponding results show the scope of the reduced model in terms of a range of parameter values where it can be effectively used in practice.Publicado en: Mecánica Computacional vol. XXXV, no. 21Facultad de IngenierÃ
Uncertainty quantification to assess a reduced model for the remote heating of a polymer
This article studies the feasibility of a 1D radiative transfer model to compute the thermal source for a remote heating problem associated to the physics of the so-called plasmonic resonance (PR) in a synthetic polymeric material. The PR is responsible for converting the optical radiation from the incident laser beam into an equivalent thermal source and is achieved by embedding gold nanoparticles during the design of the synthetic polymer. Since the Radiative Transfer Equation cannot be analytically solved for a real experimental case, a two-staged simplified process is considered which requires the uncertainty quantification as a prior stage, in order to make an appropriate control of the resulting temperature profile. In this work, we include propagation errors for lattices of 1D, 2D and 3D geometries, due to the approximate laser source profile used, as well as those arisen from uncertainties in the thermal parameters and the ones derived from the variables involved in the design of the polymer. Computational simulations for a suitable experimental polymer are carried out using COMSOL®. Corresponding results show the scope of the reduced model in terms of a range of parameter values where it can be effectively used in practice.Publicado en: Mecánica Computacional vol. XXXV, no. 21Facultad de IngenierÃ
Uncertainty quantification to assess a reduced model for the remote heating of a polymer
This article studies the feasibility of a 1D radiative transfer model to compute the thermal source for a remote heating problem associated to the physics of the so-called plasmonic resonance (PR) in a synthetic polymeric material. The PR is responsible for converting the optical radiation from the incident laser beam into an equivalent thermal source and is achieved by embedding gold nanoparticles during the design of the synthetic polymer. Since the Radiative Transfer Equation cannot be analytically solved for a real experimental case, a two-staged simplified process is considered which requires the uncertainty quantification as a prior stage, in order to make an appropriate control of the resulting temperature profile. In this work, we include propagation errors for lattices of 1D, 2D and 3D geometries, due to the approximate laser source profile used, as well as those arisen from uncertainties in the thermal parameters and the ones derived from the variables involved in the design of the polymer. Computational simulations for a suitable experimental polymer are carried out using COMSOL®. Corresponding results show the scope of the reduced model in terms of a range of parameter values where it can be effectively used in practice.Publicado en: Mecánica Computacional vol. XXXV, no. 21Facultad de IngenierÃ
Analysis Of Low Temperature Impact Fracture Data Of Thermoplastic Polymers
Impact fracture toughness of polypropylene (PP) blends, high density polyethylene (HDPE) and rubber toughened polymethylmethacrylate (RTPMMA) has been studied by means of three-point bending falling weight impact testing at different temperatures ranging from -60 degrees C to room temperature using the cleavage fracture toughness, JC parameter [ASTM E1820-99a]. The latter Fracture Mechanics methodology was chosen due to its simplicity [Fasce et al., 2003]. Traces of the impact tests were analyzed using an inverse methodology just proposed by Pettarin et al. (2003). This methodology makes it possible to obtain from a three-point bending instrumented impact test the mechanical response of the material, discarding the dynamic effects associated with the test. The results show that the average JC values calculated with treated and untreated data are similar for a given material, while the standard deviations are larger when the calculations are made with the untreated data. It is clear that the inverse methodology used to correct the data reduces error propagation, giving place to more precise estimations, and therefore more reliable JC values
Uni- and biaxial impact behavior of double-gated nanoclay-reinforced polypropylene injection moldings
Polypopylene/nanoclay three-dimensional parts were
produced without intermediate steps by direct injection
molding to explore the influence of flow features and
nanoclay incorporation in their impact performance.
The nanocomposite was obtained by direct compounding
of commercial PP with nanoclay masterbatch. The
as-molded morphology was analyzed by X-ray and
TEM analyses in terms of skin-core structure and
nanoclay particle dispersion. The nanoclay particles
induced the reduction of b-form spherulites, a known
toughener. The impact behavior was assessed in tensile
and biaxial modes. The PP nanocomposite molding
toughness was practically unaffected by the processing
melt temperature and flow rate. Conversely the
nanoclay presence is influent in the impact performance.
Under biaxial stress impact, the regions close to
weld lines are tougher than the bulk and the fracture
develops with main crack paths along the flow direction
and the weld line. Cracking along the weld line
results from less macromolecular interpenetration and
chain entanglement, and unfavorable nanoparticle orientation.
It seems that a failure mechanism which
involves nanoclay delamination and multiple matrix
crazing explains the toughening of PP in the directions
where the nanoparticle orientation with respect to
loading is adequate.Contract grant sponsors: CONICET, ANPCyT from Argentina, MINCyT (Argentina) - FCT (Portugal), Universities Nacional de Mar del Plata and Minho
Surface property effects of compounding a nanoclay masterbatch in PP injection moulding
Indicado para o prémio de melhor artigo mais inovador.The interest on the use of nanofillers in injection mouldings has been going on for more than a decade but a real breakthrough has not been achieved yet, especially in that mechanical properties are concerned. The nucleating effect of nanoclays in semicrystalline polymers suggests that surface effects may result interesting especially during processing. This paper includes some information on the surface properties of an injection moulding grade of polypropylene mixed with a commercial masterbatch of PP and 50% of organoclay. They were moulded as plates for testing in a prototype device for determining the coefficient of friction in as-moulding conditions. The surface was also characterised by depth sensing indentation tests. The through thickness microstructures of the mouldings were assessed by optical microscopy and differential scanning calorimetry, while surface morphology was assessed by X-ray diffraction. It was observed that independently of MB content, its addition caused a slight increase in elastic modulus and hardness in the skin layer.The friction
properties directly associable to the product performance showed a slight improvement in terms of the dynamic friction coefficient. Conversely the static friction coefficient that is relevant in processing was no affected by the presence of the nanoclay
- …