Optical properties of Southern Hemisphere aerosols: Report of the joint CSIRO/NASA study

This study was made in support of the LAWS and GLOBE programs, which aim to design a suitable Doppler lidar system for measuring global winds from a satellite. Observations were taken from 5 deg S to 45 deg S along and off the E and SE Australian coast, thus obtaining representative samples over a large latitude range. Observations were made between 0 and 6 km altitude of aerosol physical and chemical properties in situ from the CSIRO F-27 aircraft; of lidar backscatter coefficients at 10.6 micron wavelength from the F-27 aircraft; of lidar backscatter profiles at 0.694 microns at Sale, SE Australia; and of lidar backscatter profiles at 0.532 microns at Cowley Beach, NE Australia. Both calculations and observations in the free troposphere gave a backscatter coefficient of 1-2 x 10 to the -11/m/sr at 10.6 microns, although the accuracies of the instruments were marginal at this level. Equivalent figures were 2-8 x 10 to the -9/m/sr (aerosol) and 9 x 10 to the -9 to 2 x 10 to the -8/m/sr (lidar) at 0.694 microns wavelength at Sale; and 3.7 x 10 to the -9/m/sr (aerosol) and 10 to the -8 to 10 to the -7/m/sr (lidar) at 0.532 microns wavelength at Cowley Beach. The measured backscatter coefficients at 0.694 and 0.532 microns were consistently higher than the values calculated from aerosol size distributions by factors of typically 2 to 10

Assessing the occurrence and transfer dynamics of ESBL/pAmpC-producing Escherichia coli across the broiler production pyramid

Extended-spectrum \u3b2-lactamase (ESBL)- and plasmid mediated AmpC-type cephalosporinase (pAmpC)-producing Escherichia coli (ESBL/pAmpC E. coli) in food-producing animals is a major public health concern. This study aimed at quantifying ESBL/pAmpC-E. coli occurrence and transfer in Italy's broiler production pyramid. Three production chains of an integrated broiler company were investigated. Cloacal swabs were taken from parent stock chickens and offspring broiler flocks in four fattening farms per chain. Carcasses from sampled broiler flocks were collected at slaughterhouse. Samples were processed on selective media, and E. coli colonies were screened for ESBL/pAmpC production. ESBL/pAmpC genes and E. coli phylogroups were determined by PCR and sequencing. Average pairwise overlap of ESBL/pAmpC E. coli gene and phylogroup occurrences between subsequent production stages was estimated using the proportional similarity index, modelling uncertainty in a Monte Carlo simulation setting. In total, 820 samples were processed, from which 513 ESBL/pAmpC E. coli isolates were obtained. We found a high prevalence (92.5%, 95%CI 72.1-98.3%) in day-old parent stock chicks, in which blaCMY-2 predominated; prevalence then dropped to 20% (12.9-29.6%) at laying phase. In fattening broilers, prevalence was 69.2% (53.6-81.3%) at the start of production, 54.2% (38.9-68.6%) at slaughter time, and 61.3% (48.1-72.9%) in carcasses. Significantly decreasing and increasing trends for respectively blaCMY-2 and blaCTX-M-1 gene occurrences were found across subsequent production stages. ESBL/pAmpC E. coli genetic background appeared complex and bla-gene/phylogroup associations indicated clonal and horizontal transmission. Modelling revealed that the average transfer of ESBL/pAmpC E. coli genes between subsequent production stages was 47.7% (42.3-53.4%). We concluded that ESBL/pAmpC E. coli in the broiler production pyramid is prevalent, with substantial transfer between subsequent production levels

Front-End electronics configuration system for CMS

The four LHC experiments at CERN have decided to use a commercial SCADA (Supervisory Control And Data Acquisition) product for the supervision of their DCS (Detector Control System). The selected SCADA, which is therefore used for the CMS DCS, is PVSS II from the company ETM. This SCADA has its own database, which is suitable for storing conventional controls data such as voltages, temperatures and pressures. In addition, calibration data and FE (Front-End) electronics configuration need to be stored. The amount of these data is too large to be stored in the SCADA database [1]. Therefore an external database will be used for managing such data. However, this database should be completely integrated into the SCADA framework, it should be accessible from the SCADA and the SCADA features, e.g. alarming, logging should be benefited from. For prototyping, Oracle 8i was selected as the external database manager. The development of the control system for calibration constants and FE electronics configuration has been done in close collaboration with the CMS tracker group and JCOP (Joint COntrols Project)(1). (1)The four LHC experiments and the CERN IT/CO group has merged their efforts to build the experiments controls systems and set up the JCOP at the end of December, 1997 for this purpose.Comment: 3 pages, 4 figures, Icaleps'01 conference PSN WEDT00

Haze in the Klang Valley of Malaysia

Continuous measurements of dry aerosol light scattering (Bsp) were made at two sites in the Klang Valley of Malaysia between December 1998 and December 2000. In addition 24-h PM2.5 samples were collected on a one-day-in-six cycle and the chemical composition of the aerosol was determined. Periods of excessive haze were defined as 24-h average Bsp values greater than 150 Mm-1 and these occurred on a number of occasions, between May and September 1999, during May 2000, and between July and September 2000. The evidence for smoke being a significant contributor to aerosol during periods of excessive haze is discussed and includes features of the aerosol chemistry, the diurnal cycle of Bsp, and the coincidence of forest fires on Sumatra during the southwest (SW) monsoon period, as well as transport modelling for one week of the southwest Monsoon of 2000. The study highlights that whilst transboundary smoke is a major contributor to poor visibility in the Klang Valley, smoke from fires on Peninsular Malaysia is also a contributor, and at all times, the domestic source of secondary particle production is present

A General Approach to Optomechanical Parametric Instabilities

We present a simple feedback description of parametric instabilities which can be applied to a variety of optical systems. Parametric instabilities are of particular interest to the field of gravitational-wave interferometry where high mechanical quality factors and a large amount of stored optical power have the potential for instability. In our use of Advanced LIGO as an example application, we find that parametric instabilities, if left unaddressed, present a potential threat to the stability of high-power operation

A fluorescence in situ staining method for investigating spores and vegetative cells of Clostridia by confocal laser scanning microscopy and structured illuminated microscopy

Non-pathogenic spore-forming Clostridia are of increasing interest due to their application in biogas production and their capability to spoil different food products. The life cycle for Clostridium includes a spore stage that can assist in survival under environmentally stressful conditions, such as extremes of temperature or pH. Due to their size, spores can be investigated by a range of microscopic techniques, many of which involve sample pretreatment. We have developed a quick, simple and non-destructive fluorescent staining procedure that allows a clear differentiation between spores and vegetative cells and effectively stains spores, allowing recovery and tracking in subsequent experiments. Hoechst 34580, Propidium iodide and wheat germ agglutinin WGA 488 were used in combination to stain four strains of Clostridia at different life cycle stages. Staining was conducted without drying the sample, preventing changes induced by dehydration and cells observed by confocal laser scanner microscopy or using a super-resolution microscope equipped with a 3D-structured illumination module. Dual staining with Hoechst/Propidium iodide differentiated spores from vegetative cells, provided information on the viability of cells and was successfully applied to follow spore production induced by heating. Superresolution microscopy of spores probed by Hoechst 34580 also allowed chromatin to be visualised. Direct staining of a cheese specimen using Nile Red and Fast Green allowed in situ observation of spores within the cheese and their position within the cheese matrix. The proposed staining method has broad applicability and can potentially be applied to follow Clostridium spore behaviour in a range of different environments

The closed orbit measurement system for the CERN Antiproton Decelerator

The closed-orbit measurement system for the new Antiproton Decelerator (AD) employs 59 electrostatic pick-ups (PU). The intensity range from 2·1010 down to 107 particles poses challenging demands on the dynamic range and noise of the head amplifier. A low noiseamplifier has been developed, having an equivalent input noise of 0.6nV/√(Hz), allowing beam positions to be measured to ±0.5 mm with 5·106 particles. Two different gains take care of the large dynamic range. After amplification and multiplexing, the PU signals are fed to a network analyser, where each measurement point corresponds to one PU. The network analyser is phase locked to the RF of the AD, thus acting as a “tracking filter” instrument. An orbit measurement takes from 0.2 to 12 s depending on the IF-bandwidth of the network analyser, selected according to the beam intensity, and the precision required. At the end of the network analyser sweep the data are read via a GPIB interface and treated by a real-time task running in a VME based Power PC

On the Complexity of Grammar-Based Compression over Fixed Alphabets

It is shown that the shortest-grammar problem remains NP-complete if the alphabet is fixed and has a size of at least 24 (which settles an open question). On the other hand, this problem can be solved in polynomial-time, if the number of nonterminals is bounded, which is shown by encoding the problem as a problem on graphs with interval structure. Furthermore, we present an O(3n) exact exponential-time algorithm, based on dynamic programming. Similar results are also given for 1-level grammars, i.e., grammars for which only the start rule contains nonterminals on the right side (thus, investigating the impact of the "hierarchical depth" on the complexity of the shortest-grammar problem)