7,260 research outputs found
Third-order Intermodulation Reduction in Mobile Power Amplifiers by the First Stage Bias Control
In this paper, the third order intermodulation distortion (IMD3) of three-stage power amplifier (PA) is analyzed using the Volterra series. The analysis explains how the total IMD3 of the three-stage power amplifier can be reduced by the first-stage bias condition. The three-stage PA, which is fabricated using InGaP/GaAs hetero-junction bipolar transistor (HBT), operates with an optimized first driver stage bias for higher P1dB and good gain flatness. The power amplifier has been designed for 1626.5 MHz~1660.5 MHz satellite mobile communications. With π/4 DQPSK modulation signals, this PA can deliver a highly linear output power of 33 dBm from 3.6V supply voltage. At 33 dBm output power, it shows a gain of 31.9 dB, a power-added efficiency (PAE) of 39.8%, an adjacent channel power ratio (ACPR) of -28.2 dBc at a 31.25 KHz offset frequency
Three-dimensional time dependent computation of turbulent flow
The three-dimensional, primitive equations of motion are solved numerically for the case of isotropic box turbulence and the distortion of homogeneous turbulence by irrotational plane strain at large Reynolds numbers. A Gaussian filter is applied to governing equations to define the large scale field. This gives rise to additional second order computed scale stresses (Leonard stresses). The residual stresses are simulated through an eddy viscosity. Uniform grids are used, with a fourth order differencing scheme in space and a second order Adams-Bashforth predictor for explicit time stepping. The results are compared to the experiments and statistical information extracted from the computer generated data
Dramatic improvement of strain hardening and ductility to 95% in highly-deformable high-strength duplex lightweight steels
Ferrite + austenite duplex lightweight steels have been actively developed by adding low-density Al for overcoming a limitation of stiffness deterioration by a traditional approach to obtain a weight reduction. Multiple-stage deformation mechanism in lightweight steels, i.e., simultaneous formation of deformation-induced martensite and deformation twin and additional plasticity by twinning, has been nominated as an attractive strategy, but shows a steady flow behavior with early plastic instability. Here, we present a newly designed Fe-0.3C-9Mn-5Al steel in order to obtain an optimal level of stability of austenite and a resultant outstanding combination of tensile strength and ductility, e.g., 874 MPa and 72%, together with sufficiently high strain hardening. These enhanced properties are attributed to the decreased austenite stability by controlling the austenite size and alloying partitioning due to variation in austenite fraction inside duplex microstructures. The present work gives a promise for structural applications requiring both reduced specific weight and remarkable deformability. ? 2017 The Author(s).114Ysciescopu
Evolution of a Project Based Organization, a Case study
Little research has been conducted on how project-based organizations navigate internal and external pressures to develop and improve project competences over time. Using a cases study approach, this paper examines the development and implementation of project based organization over a period of 30 years. Overall, the evolution of project management competencies in the organization broadly followed the prevailing approaches in improving organizational management practices uncovered in review of literature. The organization’s capability to adopt and implement project management frameworks improved over time as senior managers became more masterful at matching improvement actions into the organizational context. This research also presents how a systematic approach of project management maturity models for identifying and implementing project management practices and processes can increase the effectiveness and comprehensiveness of overall management practices. The study concludes with a series of recommendations in further improving project management practices and processes in project-based organizations
Growth, Condition, and Trophic Relations of Stocked Trout in Southern Appalachian Mountain Streams
Stream trout fisheries are among the most popular and valuable in the United States, but many are dependent on hatcheries to sustain fishing and harvest. Thus, understanding the ecology of hatchery‐reared trout stocked in natural environments is fundamental to management. We evaluated the growth, condition, and trophic relations of Brook Trout Salvelinus fontinalis, Brown Trout Salmo trutta, and Rainbow Trout Oncorhynchus mykiss that were stocked in southern Appalachian Mountain streams in western North Carolina. Stocked and wild (naturalized) trout were sampled over time (monthly; September 2012–June 2013) to compare condition and diet composition and to evaluate temporal dynamics of trophic position with stable isotope analysis. Relative weights (Wr) of stocked trout were inversely associated with their stream residence time but were consistently higher than those of wild trout. Weight loss of harvested stocked trout was similar among species and sizes, but fish stocked earlier lost more weight. Overall, 40% of 141 stomachs from stocked trout were empty compared to 15% of wild trout stomachs (N = 26). We identified a much higher rate of piscivory in wild trout (18 times that of stocked trout), and wild trout were 4.3 times more likely to consume gastropods relative to stocked trout. Hatchery‐reared trout were isotopically similar to co‐occurring wild fish for both δ13C and δ15N values but were less variable than wild trout. Differences in sulfur isotope ratios (δ34S) between wild and hatchery‐reared trout indicated that the diets of wild fish were enriched in δ34S relative to the diets of hatchery‐reared fish. Although hatcheryreared trout consumed prey items similar to those of wild fish, differences in consumption or behavior (e.g., reduced feeding) may have resulted in lower condition and negative growth. These findings provide critical insight on the trophic dynamics of stocked trout and may assist in developing and enhancing stream trout fisheries
Relaxed 2-D Principal Component Analysis by Norm for Face Recognition
A relaxed two dimensional principal component analysis (R2DPCA) approach is
proposed for face recognition. Different to the 2DPCA, 2DPCA- and G2DPCA,
the R2DPCA utilizes the label information (if known) of training samples to
calculate a relaxation vector and presents a weight to each subset of training
data. A new relaxed scatter matrix is defined and the computed projection axes
are able to increase the accuracy of face recognition. The optimal -norms
are selected in a reasonable range. Numerical experiments on practical face
databased indicate that the R2DPCA has high generalization ability and can
achieve a higher recognition rate than state-of-the-art methods.Comment: 19 pages, 11 figure
Grapefruit Seed Extract as a Natural Derived Antibacterial Substance against Multidrug-Resistant Bacteria
Multidrug-resistant (MDR) bacteria are increasing due to the abuse and misuse of antibiotics, and nosocomial infections by MDR bacteria are also increasing. The aim of this study was to
identify new substances that can target MDR bacteria among 12 plant extracts that are known to have
antibacterial effects. The experiments were performed by the disk diffusion test and microdilution
minimum inhibitory concentration (MIC) test, as described by the Clinical and Laboratory Standards
Institute (CLSI). By screening against methicillin-sensitive Staphylococcus aureus (MSSA), grapefruit
seed extract (GSE) was selected from 12 plant extracts for subsequent experiments. GSE showed
antibacterial effects against methicillin-resistant S. aureus (MRSA) and vancomycin-resistant S. aureus
(VRSA) in the disk diffusion test. Even at the lowest concentration, GSE showed antibacterial activity
in the microdilution MIC test. As a result, we can conclude that GSE is a naturally derived antibacterial substance that exhibits a favorable antibacterial effect even at a very low concentration, so it is a
good candidate for a natural substance that can be used to prevent or reduce nosocomial infections
as coating for materials used in medical contexts or by mixing a small amount with other material
Double Field Theory Formulation of Heterotic Strings
We extend the recently constructed double field theory formulation of the
low-energy theory of the closed bosonic string to the heterotic string. The
action can be written in terms of a generalized metric that is a covariant
tensor under O(D,D+n), where n denotes the number of gauge vectors, and n
additional coordinates are introduced together with a covariant constraint that
locally removes these new coordinates. For the abelian subsector, the action
takes the same structural form as for the bosonic string, but based on the
enlarged generalized metric, thereby featuring a global O(D,D+n) symmetry.
After turning on non-abelian gauge couplings, this global symmetry is broken,
but the action can still be written in a fully O(D,D+n) covariant fashion, in
analogy to similar constructions in gauged supergravities.Comment: 28 pages, v2: minor changes, version published in JHE
- …