1,621 research outputs found
Enhancment of dense urban digital surface models from VHR optical satellite stereo data by pre-segmentation and object detection
The generation of digital surface models (DSM) of urban areas from very high resolution (VHR) stereo satellite imagery requires advanced methods. In the classical approach of DSM generation from stereo satellite imagery, interest points are extracted and correlated between the stereo mates using an area based matching followed by a least-squares sub-pixel refinement step. After a region growing the 3D point list is triangulated to the resulting DSM. In urban areas this approach fails due to the size of the correlation window, which smoothes out the usual steep edges of buildings. Also missing correlations as for partly – in one or both of the images – occluded areas will simply be interpolated in the triangulation step. So an urban DSM generated with the classical approach results in a very smooth DSM with missing steep walls, narrow streets and courtyards. To overcome these problems algorithms from computer vision are introduced and adopted to satellite imagery. These algorithms do not work using local optimisation like the area-based matching but try to optimize a (semi-)global cost function. Analysis shows that dynamic programming approaches based on epipolar images like dynamic line warping or semiglobal matching yield the best results according to accuracy and processing time. These algorithms can also detect occlusions – areas not visible in one or both of the stereo images. Beside these also the time and memory consuming step of handling and triangulating large point lists can be omitted due to the direct operation on epipolar images and direct generation of a so called disparity image fitting exactly on the first of the stereo images. This disparity image – representing already a sort of a dense DSM – contains the distances measured in pixels in the epipolar direction (or a no-data value for a detected occlusion) for each pixel in the image. Despite the global optimization of the cost function many outliers, mismatches and erroneously detected occlusions remain, especially if only one stereo pair is available. To enhance these dense DSM – the disparity image – a pre-segmentation approach is presented in this paper. Since the disparity image is fitting exactly on the first of the two stereo partners (beforehand transformed to epipolar geometry) a direct
correlation between image pixels and derived heights (the disparities) exist. This feature of the disparity image is exploited to integrate additional knowledge from the image into the DSM. This is done by segmenting the stereo image, transferring the segmentation information to the DSM and performing a statistical analysis on each of the created DSM segments. Based on this analysis and spectral information a coarse object detection and classification can be performed and in turn the DSM can be enhanced. After the description of the proposed method some results are shown and discussed
Additional grain boundary strengthening in length-scale architectured copper with ultrafine and coarse domains
The response of drifting buoys to currents and wind
Two buoy types have been tested with respect to their drift performance under drogued and undrogued conditions. Additionally, forces acting on the buoys were measured directly. Quadratic drag laws have been confirmed for the drag in water and the combined drag of wind and waves. Stokes drift contributes about one half to the wind factor of 0.023, which is obtained for undrogued buoys in the Atlantic. The forces on a windowshade drogue are given by a linear relation between force and water velocity for speeds exceeding 10 cm/s. They have been extrapolated to speeds of less than 10 cm/s by both a linear and a quadratic relationship. Correlations between drift and wind speed in the Atlantic suggest that the linear law is a better approximation under realistic conditions. According to these measurements in the Atlantic the described buoy-drogue system with a windowshade drogue in 100-m depth is a good current-measuring device. Slippage is negligible for wind speeds of less than 15 m/s and is less than 2 cm/s under gale conditions. Undrogued buoys are strongly affected by wind and cannot be used for the analysis of currents without correction, even under light winds
Craig Batty, Susan Kerrigan (Hg.): Screen Production Research. Creative Practice as a Mode of Enquiry
Philipp Auchter, Josephine Diecke, Johanna Diener, Benjamin Eugster, Corinna Haag, Simon Meier (Hg.): Qualität: Schweizer Filmjahrbuch Cinema #64
-179
Ekman drift in homogeneous water
Measurements made with satellite-tracked buoys drogued in different layers between the sea surface and 30-m depth under homogeneous winter conditions in the North Sea allow analysis of the Ekman currents under a large variety of wind conditions. The experiment lasted from November 20, 1991, until February 29, 1992. The first 4 weeks of this period, during which the buoys stayed close together, are used to determine the Ekman stresses. The total current field is a superposition of barotropic currents due to sea level variations and Ekman currents. The classical Ekman theory is not able to describe properly the observed deflection of the currents to the right of the wind direction and their decay with depth. This deflection is 10° near the sea surface and increases to approximately 50° in 25-m depth. The relation between wind stress and the stress field in the interior of the water is given by a tensor, which describes the rotation and the variation of the stress with increasing depth. The concept of eddy viscosity is applicable, if a viscosity tensor is used to relate stress and vertical shear. The viscosity tensor is a function of the vertical coordinate only and is independent from the wind stress. It shows maximum values in 15- to 20-m depth and may be due to Langmuir circulation cells. Further studies are needed to determine the physics of this tensor. Its magnitude in the interior of the mixed layer exceeds 1000 cgs units. Consequently, Ekman currents are weak and may not be the dominant currents within the mixed layer
Philipp Auchter, Josephine Diecke, Johanna Diener, Benjamin Eugster, Corinna Haag, Simon Meier (Hg.): Qualität: Schweizer Filmjahrbuch Cinema #64
- …