63 research outputs found
Cogeneration scheme of using SER of gas-processing plant
This article describes the thermal protection schemes application of the secondary resources to generate electricity, as well as the technological plan for energy disposal plant is given. The analyses of numerous research works in the sphere of thermodynamic effectiveness of power plant cycles with different working substances were presented. It is shown that the application of secondary resources provides a considerable volume of electricity for balance-of-plant needs
Reliability of instrumental recording of the natural gas
The comparison of industrial natural gas flow meters, functioning of which is based on different metering methods usage, was made, recommendations on the optimization of choice of the meter's type in accordance with operation conditions were given
Carbon Supported Polyaniline as Anode Catalyst: Pathway to Platinum-Free Fuel Cells
The effectiveness of carbon supported polyaniline as anode catalyst in a fuel
cell (FC) with direct formic acid electrooxidation is experimentally
demonstrated. A prototype FC with such a platinum-free composite anode
exhibited a maximum room-temperature specific power of about 5 mW/cm2Comment: 11 pages, 3 Postscript figures, atricle tex styl
NightSplitter: a scheduling tool to optimize (sub)group activities
International audienceHumans are social animals and usually organize activities in groups. However, they are often willing to split temporarily a bigger group in subgroups to enhance their preferences. In this work we present NightSplitter, an on-line tool that is able to plan movie and dinner activities for a group of users, possibly splitting them in subgroups to optimally satisfy their preferences. We first model and prove that this problem is NP-complete. We then use Constraint Programming (CP) or alternatively Simulated Annealing (SA) to solve it. Empirical results show the feasibility of the approach even for big cities where hundreds of users can select among hundreds of movies and thousand of restaurants
Система метрологического обеспечения измерений единицы удельной теплоемкости в диапазоне температур от 260 до 870 К. Государственный первичный эталон и средства передачи
The article presents the results of creating a new state primary standard for the specific heat capacity unit and means for transmission of the unit to other devices, namely, reference measures from various materials. The main structural features of the created calorimeter, its metrological characteristics are described. The data on the specific heat capacity of some materials, considered as the reference measures of specific heat, are shown. The experimental data are compared with data, published by other researchers.В статье приведены результаты создания нового государственного первичного эталона единицы удельной теплоемкости и средств передачи единицы удельной теплоемкости, эталонных мер из различных материалов. Приведены основные конструкционные особенности созданного калориметра, его метрологические характеристики и результаты измерения удельной теплоемкости исследованных материалов, включенных в состав эталона в качестве эталонных мер удельной теплоемкости, а также сравнение полученных результатов с данными других авторов
A community-endorsed open-source lexicon for contrast agent–based perfusion MRI: a consensus guidelines report from the ISMRM Open Science Initiative for Perfusion Imaging (OSIPI)
This manuscript describes the ISMRM OSIPI (Open Science Initiative for Perfusion Imaging) lexicon for dynamic contrast-enhanced and dynamic susceptibility-contrast MRI. The lexicon was developed by Taskforce 4.2 of OSIPI to provide standardized definitions of commonly used quantities, models, and analysis processes with the aim of reducing reporting variability. The taskforce was established in February 2020 and consists of medical physicists, engineers, clinicians, data and computer scientists, and DICOM (Digital Imaging and Communications in Medicine) standard experts. Members of the taskforce collaborated via a slack channel and quarterly virtual meetings. Members participated by defining lexicon items and reporting formats that were reviewed by at least two other members of the taskforce. Version 1.0.0 of the lexicon was subject to open review from the wider perfusion imaging community between January and March 2022, and endorsed by the Perfusion Study Group of the ISMRM in the summer of 2022. The initial scope of the lexicon was set by the taskforce and defined such that it contained a basic set of quantities, processes, and models to enable users to report an end-to-end analysis pipeline including kinetic model fitting. We also provide guidance on how to easily incorporate lexicon items and definitions into free-text descriptions (e.g., in manuscripts and other documentation) and introduce an XML-based pipeline encoding format to encode analyses using lexicon definitions in standardized and extensible machine-readable code. The lexicon is designed to be open-source and extendable, enabling ongoing expansion of its content. We hope that widespread adoption of lexicon terminology and reporting formats described herein will increase reproducibility within the field
Surviving Sepsis Campaign: international guidelines for management of severe sepsis and septic shock, 2012
OBJECTIVE: To provide an update to the "Surviving Sepsis Campaign Guidelines for Management of Severe Sepsis and Septic Shock," last published in 2008.
DESIGN: A consensus committee of 68 international experts representing 30 international organizations was convened. Nominal groups were assembled at key international meetings (for those committee members attending the conference). A formal conflict of interest policy was developed at the onset of the process and enforced throughout. The entire guidelines process was conducted independent of any industry funding. A stand-alone meeting was held for all subgroup heads, co- and vice-chairs, and selected individuals. Teleconferences and electronic-based discussion among subgroups and among the entire committee served as an integral part of the development.
METHODS: The authors were advised to follow the principles of the Grading of Recommendations Assessment, Development and Evaluation (GRADE) system to guide assessment of quality of evidence from high (A) to very low (D) and to determine the strength of recommendations as strong (1) or weak (2). The potential drawbacks of making strong recommendations in the presence of low-quality evidence were emphasized. Recommendations were classified into three groups: (1) those directly targeting severe sepsis; (2) those targeting general care of the critically ill patient and considered high priority in severe sepsis; and (3) pediatric considerations.
RESULTS: Key recommendations and suggestions, listed by category, include: early quantitative resuscitation of the septic patient during the first 6 h after recognition (1C); blood cultures before antibiotic therapy (1C); imaging studies performed promptly to confirm a potential source of infection (UG); administration of broad-spectrum antimicrobials therapy within 1 h of the recognition of septic shock (1B) and severe sepsis without septic shock (1C) as the goal of therapy; reassessment of antimicrobial therapy daily for de-escalation, when appropriate (1B); infection source control with attention to the balance of risks and benefits of the chosen method within 12 h of diagnosis (1C); initial fluid resuscitation with crystalloid (1B) and consideration of the addition of albumin in patients who continue to require substantial amounts of crystalloid to maintain adequate mean arterial pressure (2C) and the avoidance of hetastarch formulations (1B); initial fluid challenge in patients with sepsis-induced tissue hypoperfusion and suspicion of hypovolemia to achieve a minimum of 30 mL/kg of crystalloids (more rapid administration and greater amounts of fluid may be needed in some patients (1C); fluid challenge technique continued as long as hemodynamic improvement is based on either dynamic or static variables (UG); norepinephrine as the first-choice vasopressor to maintain mean arterial pressure ≥65 mmHg (1B); epinephrine when an additional agent is needed to maintain adequate blood pressure (2B); vasopressin (0.03 U/min) can be added to norepinephrine to either raise mean arterial pressure to target or to decrease norepinephrine dose but should not be used as the initial vasopressor (UG); dopamine is not recommended except in highly selected circumstances (2C); dobutamine infusion administered or added to vasopressor in the presence of (a) myocardial dysfunction as suggested by elevated cardiac filling pressures and low cardiac output, or (b) ongoing signs of hypoperfusion despite achieving adequate intravascular volume and adequate mean arterial pressure (1C); avoiding use of intravenous hydrocortisone in adult septic shock patients if adequate fluid resuscitation and vasopressor therapy are able to restore hemodynamic stability (2C); hemoglobin target of 7-9 g/dL in the absence of tissue hypoperfusion, ischemic coronary artery disease, or acute hemorrhage (1B); low tidal volume (1A) and limitation of inspiratory plateau pressure (1B) for acute respiratory distress syndrome (ARDS); application of at least a minimal amount of positive end-expiratory pressure (PEEP) in ARDS (1B); higher rather than lower level of PEEP for patients with sepsis-induced moderate or severe ARDS (2C); recruitment maneuvers in sepsis patients with severe refractory hypoxemia due to ARDS (2C); prone positioning in sepsis-induced ARDS patients with a PaO (2)/FiO (2) ratio of ≤100 mm Hg in facilities that have experience with such practices (2C); head-of-bed elevation in mechanically ventilated patients unless contraindicated (1B); a conservative fluid strategy for patients with established ARDS who do not have evidence of tissue hypoperfusion (1C); protocols for weaning and sedation (1A); minimizing use of either intermittent bolus sedation or continuous infusion sedation targeting specific titration endpoints (1B); avoidance of neuromuscular blockers if possible in the septic patient without ARDS (1C); a short course of neuromuscular blocker (no longer than 48 h) for patients with early ARDS and a PaO (2)/FI O (2) 180 mg/dL, targeting an upper blood glucose ≤180 mg/dL (1A); equivalency of continuous veno-venous hemofiltration or intermittent hemodialysis (2B); prophylaxis for deep vein thrombosis (1B); use of stress ulcer prophylaxis to prevent upper gastrointestinal bleeding in patients with bleeding risk factors (1B); oral or enteral (if necessary) feedings, as tolerated, rather than either complete fasting or provision of only intravenous glucose within the first 48 h after a diagnosis of severe sepsis/septic shock (2C); and addressing goals of care, including treatment plans and end-of-life planning (as appropriate) (1B), as early as feasible, but within 72 h of intensive care unit admission (2C). Recommendations specific to pediatric severe sepsis include: therapy with face mask oxygen, high flow nasal cannula oxygen, or nasopharyngeal continuous PEEP in the presence of respiratory distress and hypoxemia (2C), use of physical examination therapeutic endpoints such as capillary refill (2C); for septic shock associated with hypovolemia, the use of crystalloids or albumin to deliver a bolus of 20 mL/kg of crystalloids (or albumin equivalent) over 5-10 min (2C); more common use of inotropes and vasodilators for low cardiac output septic shock associated with elevated systemic vascular resistance (2C); and use of hydrocortisone only in children with suspected or proven "absolute"' adrenal insufficiency (2C).
CONCLUSIONS: Strong agreement existed among a large cohort of international experts regarding many level 1 recommendations for the best care of patients with severe sepsis. Although a significant number of aspects of care have relatively weak support, evidence-based recommendations regarding the acute management of sepsis and septic shock are the foundation of improved outcomes for this important group of critically ill patients
Magnetically controlled electroslag melting of titanium alloys.
International audienceSeries of titanium alloy remeltings have been performed in an experimental electroslag setup. The typical electrovortical flow pattern in both the slag and the liquid metal pool has been radically modified by imposing an external magnetic field. Several configurations of the applied magnetic field were considered and tested during actual remelting. The best results were obtained during remelting in the presence of a pulse axial magnetic field providing fine-grained titanium alloy ingots of uniform composition. It has been shown that the new process of magnetically controlled electroslag melting is a highly competitive alternative method for the production of multi-component titanium alloys. Further modifications of the process are proposed with an aim to optimize energy efficiency and equipment costs
Temperature-dependent nepheloxetic shift of the 5 D 0→7 F 0 luminescence line of a Eu3+ ion in a superionic Na5Y(:Eu)Si4O12 single crystal
- …