Magnetoresistance Features at the Magnetic Field-Induced Phase Transition in FeRh Thin Films

The causes of the appearance of first-order magnetic phase transitions remain a mystery. FeRh alloy is a classical material where a first-order magnetic phase transition occurs. The authors of this article studied the phase transition from the antiferromagnetic state to the ferromagnetic state in FeRh alloy. Comparison of the magnetometry and transport properties results allowed us to determine a number of differences in the mechanisms of the phase evolution during magnetic field and temperature induced transition. This article notes the priority of the rearrangement of the micromagnetic structure of the ferromagnetic phase as a result of the induction of a phase transition by a magnetic field. The main feature of the magnetic field induced phase transition compared to the temperature induced one is the change in the micromagnetic structure of the ferromagnetic phase. The growth of a ferromagnetic phase with less scattering fields leads to asymmetric behavior when a phase transition is induced near the metastable state. We also focused on the importance of taking into account the effect of magnetostriction when analyzing the evolution of the phase transition, which leads to the irreversibility of the phase transition near a zero magnetic field

Radiation-induced stable radicals in calcium phosphates: Results of multifrequency epr, ednmr, eseem, and endor studies

This article presents the results of a study of radiation-induced defects in various synthetic calcium phosphate (CP) powder materials (hydroxyapatite—HA and octacalcium phosphate—OCP) by electron paramagnetic resonance (EPR) spectroscopy at the X, Q, and W-bands (9, 34, 95 GHz for the microwave frequencies, respectively). Currently, CP materials are widely used in orthopedics and dentistry owing to their high biocompatibility and physico-chemical similarity with human hard tissue. It is shown that in addition to the classical EPR techniques, other experimental approaches such as ELDOR-detected NMR (EDNMR), electron spin echo envelope modulation (ESEEM), and electronnuclear double resonance (ENDOR) can be used to analyze the electron–nuclear interactions of CP powders. We demonstrated that the value and angular dependence of the quadrupole interaction for14 N nuclei of a nitrate radical can be determined by the EDNMR method at room temperature. The ESEEM technique has allowed for a rapid analysis of the nuclear environment and estimation of the structural positions of radiation-induced centers in various crystal matrices. ENDOR spectra can provide information about the distribution of the nitrate radicals in the OCP structure. © 2021 by the authors. Licensee MDPI, Basel, Switzerland. Published under the CC BY 4.0 license.Authors would like to thank the Russian Foundation for Basic Research, project no. 18-29-11086. Institute of Solid State Physics, University of Latvia as the Center of Excellence received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01–2016-2017- TeamingPhase2 under grant agreement No. 739508, project CAMART2

Correlation between magnetic and crystal structural sublattices in palladium-doped FeRh alloys: Analysis of the metamagnetic phase transition driving forces

FeRh alloys doped with the third element exhibit a change in the lattice and magnetic subsystems, which are manifested in antiferromagnetic- ferromagnetic (AFM-FM) first-order phase transition temperature, the shrinkage of the temperate hysteresis under transition, and the reduction of the saturation magnetization. All aforementioned parameters are crucial for practical applications. To control them it is quite important to determine the driving forces of the metamagnetic transition and its origins. In this manuscript ab initio calculations and experimental studies results are presented, which demonstrate the correlation between the structural and magnetic properties of the Fe50Rh50−xPdx alloys. The qualitative analysis of the metamagnetic phase transition driving forces in palladium-doped FeRh alloys was performed to determine their contribution to the evolution of magnetic and lattice subsystems. In addition, the impact of the impurities phases together with its magnetic behavior on the AFM-FM phase transition was considered.Fil: Komlev, Aleksei S.. Lomonosov Moscow State University; RusiaFil: Karpenkov, Dmitriy Y.. National University of Science and Technology; Rusia. Lomonosov Moscow State University; RusiaFil: Gimaev, Radel R.. Lomonosov Moscow State University; RusiaFil: Chirkova, Alisa. Institute for Materials Science; AlemaniaFil: Akiyama, Ayaka. Hirosaki University; JapónFil: Miyanaga, Takafumi. Hirosaki University; JapónFil: Hupalo, Marcio Ferreira. Universidade Estadual do Ponta Grossa; BrasilFil: Aguiar, D.J.M.. Universidade Federal do Paraná; BrasilFil: Carvalho, Alexandre Magnus G.. Universidade Estadual de Maringá; Brasil. Universidade Federal de Sao Paulo; BrasilFil: Jiménez, María Julia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Instituto de Física del Sur. Universidad Nacional del Sur. Departamento de Física. Instituto de Física del Sur; ArgentinaFil: Cabeza, Gabriela Fernanda. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Instituto de Física del Sur. Universidad Nacional del Sur. Departamento de Física. Instituto de Física del Sur; ArgentinaFil: Zverev, Vladimir I.. Lomonosov Moscow State University; RusiaFil: Perov, Nikolai S.. Lomonosov Moscow State University; Rusi

Influence of Structural Disorder on the Magnetic Order in FeRhCr Alloys

Magnetic phase transitions in alloys are highly influenced by the sample preparation techniques. In the present research, electronic and magnetic properties of Fe48Cr3Rh49 alloys with varying cooling rates were studied, both experimentally and theoretically. The degree of crystalline ordering was found to depend on the cooling rate employed after annealing the alloy. Modeling of alloy structures with different degrees of crystalline ordering was carried out via strategic selection of substitution positions and distances between chromium atoms. Theoretical calculations revealed significant changes in magnetic and electronic properties of the alloy with different substitutions. A comprehensive analysis of the calculated and experimental data established correlations between structural characteristics and parameters governing the magnetic phase transition. In this study, we also developed a method for evaluating the magnetic properties of the alloys obtained under different heat treatments. The proposed approach integrates atom substitution and heat treatment parameters, offering precise control over alloy manufacturing to effectively tune their essential magnetic properties

Calcium phosphate blossom for bone tissue engineering

[No abstract available

Strength increase during ceramic biomaterial-induced bone regeneration: a micromechanical study

Bone tissue engineering materials must blend in the targeted physiological environment, in terms of both the materials’ biocompatibility and mechanical properties. As for the latter, a well-adjusted stiffness ensures that the biomaterial’s deformation behavior fits well to the deformation behavior of the surrounding biological tissue, whereas an appropriate strength provides sufficient load-carrying capacity of the biomaterial. Here, a mathematical modeling approach for estimating the macroscopic load that initiates failure of a hierarchically organized, granular, hydroxyapatite-based biomaterial is presented. For this purpose, a micromechanics model is developed for downscaling macroscopically prescribed stress (or strain) states to the level of the needle-shaped hydroxyapatite crystals. Presuming that the biomaterial fails due to the quasi-brittle failure of the most unfavorably stressed hydroxyapatite needle, the downscaled stress tensors are fed into a suitable, Mohr-Coulomb-type failure criterion, based on which the macroscopic failure load is deduced. The change of the biomaterial’s composition in response to placing it in physiological solution, caused by growth of new bone tissue on the granules’s surfaces, on the one hand, and by resorption of the hydroxyapatite crystals, on the other hand, is taken into account by means of suitable evolution laws. Numerical studies show how the macroscopic load-carrying capacity of the biomaterial is influenced by its design parameters. The presented modeling approach could prove beneficial for the design process of the studied biomaterials (as well as similarly composed biomaterials), particularly in terms of optimizing its mechanical performance.European Research Council (ERC)Russian Science FoundationNAMABIO1

X-Ray Synchrotron Radiation Pseudo-Holotomography as a New Imaging Technique to Investigate Angio- and Microvasculogenesis with No Usage of Contrast Agents

articleStandard X-ray micro-computed tomography is a technique that allows a good visualization of the structure of mineralized tissues and biomaterials, but it fails to finely discern soft tissues. Here, we used X-ray synchrotron radiation pseudo-holotomography to visualize, at three-dimensional {(3D)} level, microvascular networks for the first time with no need for contrast agents, and to extract quantitative structural data in a bone-engineered construct implanted for 24 weeks in a mouse. When compared to standard histology, pseudo-holotomography allowed a previously unavailable {3D} resolution of the vessels, which in turn appeared more clearly visible. Thus, pseudo-holotomography is an innovative technique that offers a promising powerful tool to investigate angio- and microvasculogenesis in advanced biomedical research areas such as regenerative medicine and antiangiogenic cancer therapies