1,220 research outputs found
Solid-phase synthesis of recyclable diphosphine ligands
The authors thank the European Union (Marie Curie ITN SusPhos, Grant Agreement No. 317404 and COST action PhoSciNet cm08602) for financial support.An efficient solid-phase synthetic approach towards diphosphine ligands is demonstrated. This modular method offers facile access to this important class of ligands, in quantitative yield, providing huge potential for ligand fine-tuning. These supported ligands can be efficiently applied in asymmetric catalysis. Moreover, the immobilized catalysts can successfully be recycled multiple times addressing several synthetic and work-up challenges in the field of catalytic chemistry.PostprintPostprintPeer reviewe
Catalytic Activity and Fluxional Behavior of Complexes Based on RuHCl(CO)(PPh<sub>3</sub>)<sub>3</sub> and Xantphos-Type Ligands
With RuHCl(CO)(PPh3)3 as the starting material, the complexes RuHCl(CO)(PPh3)(L) were prepared for L = Xantphos and closely related ligands. Their catalytic activity in the direct amination of cyclohexanol showed large differences depending on the different backbone structures. In those complexes the Xantphos-type ligand backbones are slightly bent and display fluxionality, studied by VT-NMR. This was assigned to the "flipping" of the backbone via the bridging atoms in the xanthene backbone. Via line shape analysis of the peaks, the Gibbs free energy of activation of the flipping movement was found to be around 56 kJ/mol in all cases. However, the activation enthalpy and entropy differed considerably. Employing RuCl2(PPh3)3 as the precursor resulted in the trans-coordinated complexes RuCl2(PPh3)(L) for L = Xantphos, Sixantphos. Fluxionality was no longer observed, due to the fact that in these complexes the O atom in the backbone also coordinates to the Ru
Recommended from our members
Synthesis of pharmaceutical drugs from cardanol derived from cashew nut shell liquid
Authors thank the EPSRC for the critical mass grant âClean Catalysis for Sustainable Developmentâ (EP/J018139/1), Sasol Technology, UK for a case studentship (Y. S.).Cardanol from cashew nut shell liquid extracted from cashew nut shells was successfully converted into various useful pharmaceutical drugs, such as norfenefrine, rac-phenylephrine, etilefrine and fenoprofene. 3-Vinylphenol, the key intermediate for the synthesis of these drugs, was synthesised from cardanol by ethenolysis to 3-non-8-enylphenol followed by isomerising ethenolysis. The metathesis reaction worked very well using DCM, but the greener solvent, 2-methyl tetrahydrofuran, also gave very similar results. Hydroxyamination of 3-vinylphenol with an iron porphyrin catalyst afforded norfenefrine in over 70% yield. Methylation and ethylation of norfenefrine afforded rac-phenylephrine and etilefrine respectively. A sequence of CâO coupling, isomerising metathesis and selective methoxycarbonylation afforded fenoprofene in good yield. A comparison of the routes described in this paper with some standard literature syntheses of 3-vinylphenol and of the drug molecules shows significant environmental advantages in terms of precursors, yields, number of steps, conditions and the use of catalysts. The Atom Economy of our processes is generally similar or significantly superior to those of the literature processes mainly because the side products produced during synthesis of 3-vinylphenol (1-octeme, 1,4-cyclohexadiene and propene) are easily separable and of commercial value, especially as they are bio-derived. The E Factor for the production of 2-vinylphenol by our process is also very low compared with those of previously reported syntheses.Publisher PDFPeer reviewe
Recommended from our members
Multi-nuclear, high-pressure, operando FlowNMR spectroscopic study of Rh/PPh3 â catalysed hydroformylation of 1-hexene
The hydroformylation of 1-hexene with 12 bar of 1â:â1 H2/CO in the presence of the catalytic system [Rh(acac)(CO)2]/PPh3 was successfully studied by real-time multinuclear high-resolution FlowNMR spectroscopy at 50 °C. Quantitative reaction progress curves that yield rates as well as chemo- and regioselectivities have been obtained with varying P/Rh loadings. Dissolved H2 can be monitored in solution to ensure true operando conditions without gas limitation. 31P{1H} and selective excitation 1H pulse sequences have been periodically interleaved with 1H FlowNMR measurements to detect Rhâphosphine intermediates during the catalysis. Stopped-flow experiments in combination with diffusion measurements and 2D heteronuclear correlation experiments showed the known tris-phosphine complex [RhH(CO)(PPh3)3] to generate rapidly exchanging isomers of the bis-phosphine complex [Rh(CO)2(PPh3)2] under CO pressure that directly enter the catalytic cycle. A new mono-phosphine acyl complex has been identified as an in-cycle reaction intermediate
Electronic and bite angle effects in catalytic C-O bond cleavage of a lignin model compound using ruthenium xantphos complexes
The authors would like to thank the EPSRC (Global Engagement grant EP/K00445X/1 and critical mass grant EP/J018139/1) and the European Union (Marie Curie ITN âSuBiCatâ PITN-GA-2013-607044) for financial support. NMSF-Swansea and Mr. Stephen Boyer are kindly acknowledged for mass spectrometry and elemental analysis, respectively.Bite angle and electronic effects on the ruthenium-diphosphine catalysed ether bond cleavage of the lignin ÎČ-O-4 model compound 2-phenoxy-1-phenethanol were tested. Enhanced conversion of the substrate was observed with increasing Ï-donor capacity of the ligands. Kinetic and thermodynamic data suggest oxidative addition of the dehydrogenated model compound to the diphosphine Ru(0) complex to be rate-limiting.PostprintPeer reviewe
Artificial Metalloenzymes as Catalysts for Oxidative Lignin Degradation
We
report novel artificial metalloenzymes (ArMs), containing trisÂ(pyridylmethyl)Âamine
(TPA), for the atom economic oxidation of lignin ÎČ-O-4 model
compounds, using hydrogen peroxide. The protein scaffold alters the
selectivity of the reaction from a low yielding cleavage reaction
when using the parent Fe-tpa complex to a high yielding benzylic alcohol
oxidation when using the complex incorporated into a protein scaffold,
SCP-2L A100C. Engineering the protein scaffold to incorporate glutamic
acid was found to improve the ArM activity, showing that rational
design of the protein environment using metal binding amino acids
can be a first step toward improving the overall activity of an artificial
metalloenzyme
Organocatalytic chemoselective primary alcohol oxidation and subsequent cleavage of lignin model compounds and lignin
This research was supported by the European Union (Marie Curie ITN âSuBiCatâ PITN-GA-2013-607044, S.D.) and by the Distinguished Professorship Program at RWTH Aachen University funded by the Excellence Initiative of the German federal and state governments.A one-pot two-step degradation of lignin ÎČ-O-4 model compounds initiated by preferred oxidation of the primary over the secondary hydroxyl groups with a TEMPO/DAIB system has been developed [TEMPO=2,2,6,6-tetramethylpiperidine-N-oxyl, DAIB=(diacetoxy)iodobenzene]. The oxidised products are then cleaved by proline-catalysed retro-aldol reactions. This degradation methodology produces simple aromatics in good yields from lignin model compounds at room temperature with an extension to organosolv beech-wood lignin ( L1 ) resulting in known cleavage products.PostprintPostprintPeer reviewe
Metal triflates for the production of aromatics from lignin
This work was funded by the European Union (Marie Curie ITN âSuBiCatâ PITN-GA-2013-607044, PJD, CWL, NJW, PCKL, KB, JGdeV) as well as EP/J018139/1, EP/K00445X/1 grants (NJW and PCJK) and an EPSRC Doctoral Prize Fellowship (CSL).The depolymerization of lignin into valuable aromatic chemicals is one of the key goals towards establishing economically viable biorefineries. In this contribution we present a simple approach for converting lignin to aromatic monomers in high yields, under mild reaction conditions. The methodology relies on the use of catalytic amounts of easy to handle metal triflates (M(OTf)x). Initially, we evaluated the reactivity of a broad range of metal triflates using simple lignin model compounds. More advanced lignin model compounds were also used to study the reactivity of different lignin linkages. The product aromatic monomers were either phenolic C2-acetals obtained by stabilization of the aldehyde cleavage products by reaction with ethylene glycol, or methyl aromatics obtained by catalytic decarbonylation. Notably, when the former method was ultimately tested on lignin, especially Fe(OTf)3 proved very effective and the phenolic C2-acetal products were obtained in an excellent, 19.3±3.2 wt % yield.PostprintPeer reviewe
Revealing the fate of the phenylcoumaran linkage during lignin oxidation reactions
This work was funded by the EP/J018139/1, EP/K00445X/1 grants (N.J.W. and P.C.J.K.), an EPSRC Doctoral Prize Fellowship (C.S.L.), and the European Union (Marie Curie ITN âSuBiCatâ PITN-GA-2013-607044, C.W.L., N.J.W., P.C.J.K.).The fate of most lignin linkages, other than the ÎČ-O-4, under selective oxidation conditions is largely unknown. In this work we use advanced ÎČ-5 lignin model compounds to identify the fate of phenylcoumaran units in a softwood lignin during oxidation with DDQ. By using model compounds combined with detailed characterisation of the oxidised lignin polymer using HSQC and HMBC NMR we show that phenylcoumarones are a major product, and therefore constitute a novel non-native ÎČ-5 linkage in oxidised lignins. Additionally, the reactivity of these units in lignin led us to further investigate their connectivity in lignin, showing that they are found as both phenolic and etherified units. The findings and approach developed here will help improve the efficiency of selective oxidative lignin depolymerisation processes, particularly those aimed at the upgrading of softwood lignin in which phenylcoumarans are a major linkage.PostprintPeer reviewe
- âŠ