343 research outputs found
Study of Λ hyperon production in C+C collisions at 2 AGeV beam energy with the HADES spectrometer
Performance evaluation of the Boron Coated Straws detector with Geant4
The last decade has witnessed the development of several alternative neutron
detector technologies, as a consequence of upcoming neutron sources and
upgrades, as well the world-wide shortage of He. One branch of development
is the family of B-based gaseous detectors. This work focuses on the
boron coated straws (BCS) by Proportional Technologies Inc., a commercial
solution designed for use in homeland security and neutron science. A detailed
Geant4 simulation study of the BCS is presented, which investigates various
aspects of the detector performance, e.g. efficiency, activation, absorption
and the impact of scattering on the measured signal. The suitability of the BCS
detector for Small Angle Neutron Scattering (SANS), direct chopper spectrometry
and imaging is discussed.Comment: 50 pages, 37 figures, minor changes after review, results unchange
Suppression of intrinsic neutron background in the Multi-Grid detector
One of the key requirements for neutron scattering instruments is the
Signal-to-Background ratio (SBR). This is as well a design driving requirement
for many instruments at the European Spallation Source (ESS), which aspires to
be the brightest neutron source of the world. The SBR can be effectively
improved with background reduction. The Multi-Grid, a large-area thermal
neutron detector with a solid boron carbide converter, is a novel solution for
chopper spectrometers. This detector will be installed for the three
prospective chopper spectrometers at the ESS. As the Multi-Grid detector is a
large area detector with a complex structure, its intrinsic background and its
suppression via advanced shielding design should be investigated in its
complexity, as it cannot be naively calculated. The intrinsic scattered neutron
background and its effect on the SBR is determined via a detailed Monte Carlo
simulation for the Multi-Grid detector module, designed for the CSPEC
instrument at the ESS. The impact of the detector vessel and the neutron
entrance window on scattering is determined, revealing the importance of an
optimised internal detector shielding. The background-reducing capacity of
common shielding geometries, like side-shielding and end-shielding is
determined by using perfect absorber as shielding material, and common
shielding materials, like BC and Cd are also tested. On the basis of the
comparison of the effectiveness of the different shielding topologies and
materials, recommendations are given for a combined shielding of the Multi-Grid
detector module, optimised for increased SBR.Comment: 26 pages, 18 figures, revise
A First Comparison of the responses of a He4-based fast-neutron detector and a NE-213 liquid-scintillator reference detector
A first comparison has been made between the pulse-shape discrimination
characteristics of a novel He-based pressurized scintillation detector
and a NE-213 liquid-scintillator reference detector using an Am/Be mixed-field
neutron and gamma-ray source and a high-resolution scintillation-pulse
digitizer. In particular, the capabilities of the two fast neutron detectors to
discriminate between neutrons and gamma-rays were investigated. The NE-213
liquid-scintillator reference cell produced a wide range of scintillation-light
yields in response to the gamma-ray field of the source. In stark contrast, due
to the size and pressure of the He gas volume, the He-based
detector registered a maximum scintillation-light yield of 750~keV to
the same gamma-ray field. Pulse-shape discrimination for particles with
scintillation-light yields of more than 750~keV was excellent in the
case of the He-based detector. Above 750~keV its signal was
unambiguously neutron, enabling particle identification based entirely upon the
amount of scintillation light produced.Comment: 23 pages, 7 figures, Nuclear Instruments and Methods in Physics
Research Section A review addresse
Algorithmic derivation of Dyson-Schwinger Equations
We present an algorithm for the derivation of Dyson-Schwinger equations of
general theories that is suitable for an implementation within a symbolic
programming language. Moreover, we introduce the Mathematica package DoDSE
which provides such an implementation. It derives the Dyson-Schwinger equations
graphically once the interactions of the theory are specified. A few examples
for the application of both the algorithm and the DoDSE package are provided.
The package can be obtained from physik.uni-graz.at/~mah/DoDSE.html.Comment: 17 pages, 11 figures, downloadable Mathematica package v2: adapted to
version 1.2 of DoDSE package with simplified handling and improved plotting
of graphs; references adde
A simulational study of the indirect geometry neutron spectrometer, BIFROST at the European Spallation Source, from neutron source position to detector position
The European Spallation Source (ESS) is intended to become the most powerful
spallation neutron source in the world and the flagship of neutron science in
the upcoming decades. The exceptionally high neutron flux will provide unique
opportunities for scientific experiments, but also set high requirements for
the detectors. One of the most challenging aspects is the rate capability and
in particular the peak instantaneous rate capability, i.e. the number of
neutrons hitting the detector per channel or cm at the peak of the neutron
pulse. The primary purpose of this paper is to estimate the incident rates that
are anticipated for the BIFROST instrument planned for ESS, and also to
demonstrate the use of powerful simulation tools for the correct interpretation
of neutron transport in crystalline materials. A full simulation model of the
instrument from source to detector position, implemented with the use of
multiple simulation software packages is presented. For a single detector tube
instantaneous incident rates with a maximum of 1.7 GHz for a Bragg peak from a
single crystal, and 0.3 MHz for a vanadium sample are found. This paper also
includes the first application of a new pyrolytic graphite model, and a
comparison of different simulation tools to highlight their strengths and
weaknesses.Comment: 45 pages, 20 figure
Simulation of the Response of the Solid State Neutron Detector for the European Spallation Source
The characteristics of the Solid-state Neutron Detector, under development
for neutron-scattering measurements at the European Spallation Source, have
been simulated with a Geant4-based computer code. The code models the
interations of thermal neutrons and ionising radiation in the 6Li-doped
scintillating glass of the detector, the production of scintillation light and
the transport of optical, scintillation photons through the the scintillator,
en route to the photo-cathode of the attached multi-anode photomultiplier.
Factors which affect the optical-photon transport, such as surface finish,
pixelation of the glass sheet, provision of a front reflector and optical
coupling media are compared. Predictions of the detector response are compared
with measurements made with neutron and gamma-ray sources, a collimated alpha
source and finely collimated beams of 2.5 MeV protons and deuterons.Comment: Preprint 22 pages, 12 figures, published in NIM
Color-flow decomposition of QCD amplitudes
We introduce a new color decomposition for multi-parton amplitudes in QCD,
free of fundamental-representation matrices and structure constants. This
decomposition has a physical interpretation in terms of the flow of color,
which makes it ideal for merging with shower Monte-Carlo programs. The
color-flow decomposition allows for very efficient evaluation of amplitudes
with many quarks and gluons, many times faster than the standard color
decomposition based on fundamental-representation matrices. This will increase
the speed of event generators for multi-jet processes, which are the principal
backgrounds to signals of new physics at colliders.Comment: 23 pages, 11 figures, version to appear on Phys. Rev.
Tagging fast neutrons from an 241Am/9Be source
We report on an investigation of the fast-neutron spectrum emitted by
241Am/9Be. Well-understood shielding, coincidence, and time-of-flight
measurement techniques are employed to produce a continuous, polychromatic,
energy-tagged neutron beam.Comment: 17 pages, 7 figures, submitted to Journal of Applied Radiation and
Isotope
Evaluation of a method for time-of-flight, wavelength and distance calibration for neutron scattering instruments by means of a mini-chopper and standard neutron monitors
Accurate conversion of neutron time-of-flight (TOF) to wavelength, and its
uncertainty, is of fundamental importance to neutron scattering measurements.
Especially in cases where instruments are highly configurable, the
determination of the absolute wavelength after any change must always be
performed. Inspired by the manner with which neutron spectrometers determine
the absolute wavelength, we evaluate for the first time, in the author's
knowledge, a commonly used method for converting TOF to neutron wavelength, the
distance of a monitor from the source of neutrons and we analytically calculate
the uncertainty contributions that limit the precision of the conversion. The
method was evaluated at the V20 test beamline at the Helmholtz Zentrum Berlin
(HZB), emulating the ESS source with a pulse of 2.86 ms length and 14 Hz
repetition rate, by using a mini-chopper operated at 140 Hz, beam monitors
(BMs) and data acquisition infrastructure. The mini-chopper created
well-defined neutron pulses and the BM was placed at two positions, enabling
the average wavelength of each of the pulses created to be determined. The used
experimental setup resulted in absolute wavelength determination at the monitor
positions with a of 1.8% for
\r{A}. With a modest increase of the distance between the
reference monitor positions a of below
0.5% can be achieved. Further improvements are possible by using a thinner
monitor, smaller chopper disc openings and a higher rotational speed chopper.
The method requires only two neutron measurements and doesn't necessitate the
use of crystals or complex fitting, and could constitute a suitable addition to
imaging, diffraction, reflectometers and small angle neutron scattering
instruments, at spallation sources, that do not normally utilise fast choppers
- …