Catalytic Supercritical Water Gasification of Refuse Derived Fuel for High Energy Content Fuel Gas

Refuse derived fuel (RDF) was processed using hydrothermal gasification at high temperature to obtain a high energy content fuel gas. Supercritical water gasification of RDF was conducted at a temperature of 500 °C and 29 MPa pressure and also in the presence of a solid RuO2/γ-Al2O3 catalyst. The effect of residence time (0, 30 and 60 min) and different ruthenium loadings (5, 10, 20 wt% RuO2/γ-Al2O3) were investigated. Up to 93 % carbon gasification efficiency was achieved in the presence of 20 wt% RuO2/γ-Al2O3 catalyst. The fuel gas with the highest energy value of 22.5 MJ Nm−3 was produced with the 5 wt% RuO2/γ-Al2O3 catalyst after 30 min reaction time. The results were compared with the use of NaOH as a homogeneous catalyst. When NaOH was used, the maximum gross calorific value of the product gas was 32.4 MJ Nm−3 at 60 min reaction time as a result of CO2 fixation. High yields of H2 and CH4 were obtained in the presence of both the NaOH and RuO2/γ-Al2O3 catalysts

The impact of frozen sections on final surgical margins in squamous cell carcinoma of the oral cavity and lips: a retrospective analysis over an 11 years period

Taking intraoperative frozen sections (FS) is a widely used procedure in oncologic surgery. However so far no evidence of an association of FS analysis and premalignant changes in the surgical margin exists. Therefore, the aim of this study was to evaluate the impact of FS on different categories of the final margins of squamous cell carcinoma (SCC) of the oral cavity and lips

Structure formation in active networks

Structure formation and constant reorganization of the actin cytoskeleton are key requirements for the function of living cells. Here we show that a minimal reconstituted system consisting of actin filaments, crosslinking molecules and molecular-motor filaments exhibits a generic mechanism of structure formation, characterized by a broad distribution of cluster sizes. We demonstrate that the growth of the structures depends on the intricate balance between crosslinker-induced stabilization and simultaneous destabilization by molecular motors, a mechanism analogous to nucleation and growth in passive systems. We also show that the intricate interplay between force generation, coarsening and connectivity is responsible for the highly dynamic process of structure formation in this heterogeneous active gel, and that these competing mechanisms result in anomalous transport, reminiscent of intracellular dynamics

Phonon-assisted radiofrequency absorption by gold nanoparticles resulting in hyperthermia

It is suggested that in gold nanoparticles (GNPs) of about 5 nm sizes used in the radiofrequency (RF) hyperthermia, an absorption of the RF photon by the Fermi electron occurs with involvement of the longitudinal acoustic vibrational mode (LAVM), the dominating one in the distribution of vibrational density of states (VDOS). This physical mechanism helps to explain two observed phenomena: the size dependence of the heating rate (HR) in GNPs and reduced heat production in aggregated GNPs. The argumentation proceeds within the one-electron approximation, taking into account the discretenesses of energies and momenta of both electrons and LAVMs. The heating of GNPs is thought to consist of two consecutive processes: first, the Fermi electron absorbs simultaneously the RF photon and the LAVM available in the GNP; hereafter the excited electron gets relaxed within the GNP's boundary, exciting a LAVM with the energy higher than that of the previously absorbed LAVM. GNPs containing the Ta and/or Fe impurities are proposed for the RF hyperthermia as promising heaters with enhanced HRs, and GNPs with rare-earth impurity atoms are also brought into consideration. It is shown why the maximum HR values should be expected in GNPs with about 5-7 nm size.Comment: proceedings at the NATO Advanced Research workshop FANEM-2015 (Minsk, May 25-27, 2015). To be published in the final form in: "Fundamental and Applied NanoElectroMagnetics" (Springer Science + Business Media B.V.

Symptoms associated with victimization in patients with schizophrenia and related disorders

Background: Patients with psychoses have an increased risk of becoming victims of violence. Previous studies have suggested that higher symptom levels are associated with a raised risk of becoming a victim of physical violence. There has been, however, no evidence on the type of symptoms that are linked with an increased risk of recent victimization. Methods: Data was taken from two studies on involuntarily admitted patients, one national study in England and an international one in six other European countries. In the week following admission, trained interviewers asked patients whether they had been victims of physical violence in the year prior to admission, and assessed symptoms on the Brief Psychiatric Rating Scale (BPRS). Only patients with a diagnosis of schizophrenia or related disorders (ICD-10 F20–29) were included in the analysis which was conducted separately for the two samples. Symptom levels assessed on the BPRS subscales were tested as predictors of victimization. Univariable and multivariable logistic regression models were fitted to estimate adjusted odds ratios. Results: Data from 383 patients in the English sample and 543 patients in the European sample was analysed. Rates of victimization were 37.8% and 28.0% respectively. In multivariable models, the BPRS manic subscale was significantly associated with victimization in both samples. Conclusions: Higher levels of manic symptoms indicate a raised risk of being a victim of violence in involuntary patients with schizophrenia and related disorders. This might be explained by higher activity levels, impaired judgement or poorer self-control in patients with manic symptoms. Such symptoms should be specifically considered in risk assessments

Students and academics working in partnership to embed cultural competence as a graduate quality

Since 2014, the University of Sydney has been experimenting with a new initiative motivated by the research on “students as partners”. In 2014, six students were selected as Ambassadors of the Sydney Teaching Colloquium (STC)-the University’s annual learning and teaching conference-as undergraduate researchers. In that year, the focus was on assessment standards

Future costs in cost-effectiveness analysis: an empirical assessment

To assess the usage of cost-utility analysis (CUA) in oral health interventions and to evaluate the methods used and the reporting quality of CUA in publications on oral health interventions

All that glisters is not gold: a comparison of electronic monitoring versus filled prescriptions – an observational study

BACKGROUND: Poor compliance with antihypertensive medication is assumed to be an important reason for unsatisfactory control of blood pressure. Poor compliance is difficult to detect. Each method of measuring compliance has its own strengths and weaknesses. The aim of the present study was to compare patient compliance with antihypertensive drugs as measured by two methods, electronic monitoring versus refill compliance. METHODS: 161 patients with a diagnosis of hypertension for at least a year prior to inclusion, and inadequate blood pressure control (systolic blood pressure ≥ 160 mmHg and/or diastolic blood pressure ≥ 95 mmHg) despite the use of antihypertensive drugs, were included. Patients' pharmacy records from 12 months prior to inclusion were obtained. Refill compliance was calculated as the number of days for which the pills were prescribed divided by the total number of days in this period. After inclusion compliance was measured with an electronic monitor that records time and date of each opening of the pillbox. Agreement between both compliance measures was calculated using Spearman's correlation coefficient and Cohen's kappa coefficient. RESULTS: There was very little agreement between the two measures. Whereas refill compliance showed a large range of values, compliance as measured by electronic monitoring was high in almost all patients with estimates between 90% and 100%. Cohen's kappa coefficient was 0.005. CONCLUSION: While electronic monitoring is often considered to be the gold standard for compliance measurements, our results suggest that a short-term electronic monitoring period with the patient being aware of electronic monitoring is probably insufficient to obtain valid compliance data. We conclude that there is a strong need for more studies that explore the effect of electronic monitoring on patient's compliance

Principles of cartilage tissue engineering in TMJ reconstruction

Diseases and defects of the temporomandibular joint (TMJ), compromising the cartilaginous layer of the condyle, impose a significant treatment challenge. Different regeneration approaches, especially surgical interventions at the TMJ's cartilage surface, are established treatment methods in maxillofacial surgery but fail to induce a regeneration ad integrum. Cartilage tissue engineering, in contrast, is a newly introduced treatment option in cartilage reconstruction strategies aimed to heal cartilaginous defects. Because cartilage has a limited capacity for intrinsic repair, and even minor lesions or injuries may lead to progressive damage, biological oriented approaches have gained special interest in cartilage therapy. Cell based cartilage regeneration is suggested to improve cartilage repair or reconstruction therapies. Autologous cell implantation, for example, is the first step as a clinically used cell based regeneration option. More advanced or complex therapeutical options (extracorporeal cartilage engineering, genetic engineering, both under evaluation in pre-clinical investigations) have not reached the level of clinical trials but may be approached in the near future. In order to understand cartilage tissue engineering as a new treatment option, an overview of the biological, engineering, and clinical challenges as well as the inherent constraints of the different treatment modalities are given in this paper

Rhesus macaque MHC class I molecules show differential subcellular localizations

The MHC class I gene family of rhesus macaques is characterised by considerable gene duplications. While a HLA-C-orthologous gene is absent, the Mamu-A and in particular the Mamu-B genes have expanded, giving rise to plastic haplotypes with differential gene content. Although some of the rhesus macaque MHC class I genes are known to be associated with susceptibility/resistance to infectious diseases, the functional significance of duplicated Mamu-A and Mamu-B genes and the expression pattern of their encoded proteins are largely unknown. Here, we present data of the subcellular localization of AcGFP-tagged Mamu-A and Mamu-B molecules. We found strong cell surface and low intracellular expression for Mamu-A1, Mamu-A2 and Mamu-A3-encoded molecules as well as for Mamu-B*01704, Mamu-B*02101, Mamu-B*04801, Mamu-B*06002 and Mamu-B*13401. In contrast, weak cell surface and strong intracellular expression was seen for Mamu-A4*1403, Mamu-B*01202, Mamu-B*02804, Mamu-B*03002, Mamu-B*05704, Mamu-I*010201 and Mamu-I*0121. The different expression patterns were assigned to the antigen-binding α1 and α2 domains, suggesting failure of peptide binding is responsible for retaining ‘intracellular’ Mamu class I molecules in the endoplasmic reticulum. These findings indicate a diverse functional role of the duplicated rhesus macaque MHC class I genes