348 research outputs found
A computational model for a regenerator
This paper concerns a numerical model of a regenerator running at very low temperatures. The model consists of the usual three equations for a compressible fluid with an additional equation for a matrix temperature. The main difficulty with the model is the very low Mach number (approximately 1.E-3). The divergence of the velocity is not small, the pressure divergence is small, and the pressure fluctuation in time is not small. An asymptotic expansion based on the bounded derivative method of Kreiss is used to give a reduced model which eliminates acoustic waves. The velocity is then determined by a two-point boundary value problem which does not contain a time derivative. The solution obtained from the reduced system is compared with the numerical solution of the original system
Sea surface velocities from visible and infrared multispectral atmospheric mapping sensor imagery
High resolution (100 m), sequential Multispectral Atmospheric Mapping Sensor (MAMS) images were used in a study to calculate advective surface velocities using the Maximum Cross Correlation (MCC) technique. Radiance and brightness temperature gradient magnitude images were formed from visible (0.48 microns) and infrared (11.12 microns) image pairs, respectively, of Chandeleur Sound, which is a shallow body of water northeast of the Mississippi delta, at 145546 GMT and 170701 GMT on 30 Mar. 1989. The gradient magnitude images enhanced the surface water feature boundaries, and a lower cutoff on the gradient magnitudes calculated allowed the undesirable sunglare and backscatter gradients in the visible images, and the water vapor absorption gradients in the infrared images, to be reduced in strength. Requiring high (greater than 0.4) maximum cross correlation coefficients and spatial coherence of the vector field aided in the selection of an optimal template size of 10 x 10 pixels (first image) and search limit of 20 pixels (second image) to use in the MCC technique. Use of these optimum input parameters to the MCC algorithm, and high correlation and spatial coherence filtering of the resulting velocity field from the MCC calculation yielded a clustered velocity distribution over the visible and infrared gradient images. The velocity field calculated from the visible gradient image pair agreed well with a subjective analysis of the motion, but the velocity field from the infrared gradient image pair did not. This was attributed to the changing shapes of the gradient features, their nonuniqueness, and large displacements relative to the mean distance between them. These problems implied a lower repeat time for the imagery was needed in order to improve the velocity field derived from gradient imagery. Suggestions are given for optimizing the repeat time of sequential imagery when using the MCC method for motion studies. Applying the MCC method to the infrared brightness temperature imagery yielded a velocity field which did agree with the subjective analysis of the motion and that derived from the visible gradient imagery. Differences between the visible and infrared derived velocities were 14.9 cm/s in speed and 56.7 degrees in direction. Both of these velocity fields also agreed well with the motion expected from considerations of the ocean bottom topography and wind and tidal forcing in the study area during the 2.175 hour time interval
An approach to optimization of low-power Stirling cryocoolers
A method for optimizing the design (shape of the displacer) of low power Stirling cryocoolers relative to the power required to operate the systems is described. A variational calculation which includes static conduction, shuttle and radiation losses, as well as regenerator inefficiency, was completed for coolers operating in the 300 K to 10 K range. While the calculations apply to tapered displacer machines, comparison of the results with stepped displacer cryocoolers indicates reasonable agreement
Global Patterns of Tectonism on Titan from Mountain Chains and Virgae
This research is based on the exploration of tectonic patterns on Titan from a global perspective. Several moons in the outer solar system display patterns of surface tectonic features that imply global stress fields driven or modified by global forces. Patterns such as these are seen in Europa's tidally induced fracture patterns, Enceladus's tiger stripes, and Ganymede's global expansion induced normal fault bands. Given its proximity to Saturn, as well as its eccentric orbit, tectonic features and global stresses may be present on Titan as well. Titan displays possible tectonic structures, such as mountain chains along its equator (Radebaugh et al. 2007), as well as the unexplored dark linear streaks termed virgae by the IAU. Imaged by Cassini with the RADAR instrument, mountain chains near the equator are observed with a predominante east-west orientation (Liu et al. 2012, Mitri et al. 2010). Orientations such as these can be explained by modifications in the global tidal stress field induced by global contraction followed by rotational spin-up. Also, due to Titan's eccentric orbit, its current rotation rate may be in an equilibrium between tidal spin-up near periapsis and spin-down near apoapsis (Barnes and Fortney 2003). Additional stress from rotational spin-up provides an asymmetry to the stress field. This, combined with an isotropic stress from radial contraction, favors the formation of equatorial mountain chains in an east-west direction. The virgae, which have been imaged by Cassini with both the Visual and Infrared Mapping Spectrometer (VIMS) and Imaging Science Subsystem (ISS) instruments, are located predominately near 30 degrees latitude in either hemisphere. Oriented with a pronounced elongation in the east-west direction, all observed virgae display similar characteristics: similar relative albedos as the surrounding terrain however darkened with an apparent neutral absorber, broken-linear or rounded sharp edges, and connected, angular elements with distinct, linear edges. Virgae imaged during northern latitude passes are oriented with their long dimensions toward Titan's antiSaturn point. If the virgae are of tectonic origin, for instance if the turn out to be i.e. grabens, they could serve as markers to Titan's global stress field. Using them in this way allows for a mapping of global tectonic patterns. These patterns will be tested for consistency against the various sources of global stress and orientations of mountain chains. By determining what drives Titan's tectonics globally, we will be able to place Titan within the context of the other outer planet icy satellites
In Situ Thermal Imagery of Antarctic Meteorites and Their Stability on the Ice Surface
The mechanisms behind Antarctic meteorite concentrations remain enigmatic nearly 5 decades after the first recoveries, and much of the research in this direction has been based on anedcotal evidence. While these observations suggest many plausible processes that help explain Antarctic meteorite concentrations, the relative importance of these various processes (which can result in either an increase or decrease of specimens) is a critical component of any more robust model of how these concentrations form. During the 2016-2017 field season of the US Antarctic Search for Meteorites program we aquired in situ thermal imagery of meteorites specimens that provide semi-quantitative assesment of the relative temperature of these specimens and the ice. These provide insight into one hypothesized loss mechanism, the downward thermal tunnelling of meteorites warmed in the sun
Our evolving understanding of aeolian bedforms, based on observation of dunes on different worlds
Dunes, dune fields, and ripples are unique and useful records of the interaction between wind and granular materials – finding such features on a planetary surface immediately suggests certain information about climate and surface conditions (at least during the dunes’ formation and evolution). Additionally, studies of dune characteristics under non-Earth conditions allow for “tests” of aeolian process models based primarily on observations of terrestrial features and dynamics, and refinement of the models to include consideration of a wider range of environmental and planetary conditions. To-date, the planetary aeolian community has found and studied dune fields on Mars, Venus, and the Saturnian moon Titan. Additionally, we have observed candidate “aeolian bedforms” on Comet 67P/Churyumov-Gerasimenko, the Jovian moon Io, and – most recently – Pluto. In this paper, we hypothesize that the progression of investigations of aeolian bedforms and processes on a particular planetary body follows a consistent sequence – primarily set by the acquisition of data of particular types and resolutions, and by the maturation of knowledge about that planetary body. We define that sequence of generated knowledge and new questions (within seven investigation phases) and discuss examples from all of the studied bodies. The aim of such a sequence is to better define our past and current state of understanding about the aeolian bedforms of a particular body, to highlight the related assumptions that require re-analysis with data acquired during later investigations, and to use lessons learned from planetary and terrestrial aeolian studies to predict what types of investigations could be most fruitful in the future
Pressure drop of laminar gas flows in a microchannel containing various pillar matrices
Entropy and Spin Susceptibility of s-wave Type-II Superconductors near
A theoretical study is performed on the entropy and the spin
susceptibility near the upper critical field of s-wave
type-II superconductors with arbitrary impurity concentrations. The changes of
these quantities through may be expressed as , for example, where is the average flux density
and denotes entropy in the normal state. It is found that the
slopes and at T=0 are identical, connected
directly with the zero-energy density of states, and vary from 1.72 in the
dirty limit to in the clean limit. This mean-free-path dependence
of and at T=0 is quantitatively the same as that
of the slope for the flux-flow resistivity studied
previously. The result suggests that and near
T=0 are convex downward (upward) in the dirty (clean) limit, deviating
substantially from the linear behavior . The specific-heat
jump at also shows fairly large mean-free-path dependence.Comment: 8 pages, 5 figure
Methane storms as a driver of Titan's dune orientation
Titan's equatorial regions are covered by eastward propagating linear dunes.
This direction is opposite to mean surface winds simulated by Global Climate
Models (GCMs), which are oriented westward at these latitudes, similar to trade
winds on Earth. Different hypotheses have been proposed to address this
apparent contradiction, involving Saturn's gravitational tides, large scale
topography or wind statistics, but none of them can explain a global eastward
dune propagation in the equatorial band. Here we analyse the impact of
equinoctial tropical methane storms developing in the superrotating atmosphere
(i.e. the eastward winds at high altitude) on Titan's dune orientation. Using
mesoscale simulations of convective methane clouds with a GCM wind profile
featuring superrotation, we show that Titan's storms should produce fast
eastward gust fronts above the surface. Such gusts dominate the aeolian
transport, allowing dunes to extend eastward. This analysis therefore suggests
a coupling between superrotation, tropical methane storms and dune formation on
Titan. Furthermore, together with GCM predictions and analogies to some
terrestrial dune fields, this work provides a general framework explaining
several major features of Titan's dunes: linear shape, eastward propagation and
poleward divergence, and implies an equatorial origin of Titan's dune sand.Comment: Published online on Nature Geoscience on 13 April 201
Complementary classifications of aeolian dunes based on morphology, dynamics, and fluid mechanics
Dunes form where winds blow over a bed of mobile sediment grains – conditions that are common in our solar system. On Earth, dunes abound in arid continental interiors and along sandy coastlines. Dune fields have also been recognized on Venus, Mars, Saturn's moon Titan, and Pluto. In response to the different boundary conditions and other environmental forcings, dunes adopt a rich diversity of shapes, sizes, and behaviors. Thus, people around the globe and over centuries have developed a rich vocabulary to describe dunes and their complexity. As a result, existing dune nomenclature often includes redundant terms with differing definitions across scientific communities. Previous studies have endeavored to link dune shape to environmental forcing, usually by means of correlation. Although instructive, correlation-based classifications can be misleading if not based on an underlying mechanics and if dune morphogenetic classes are not uniquely defined. Here, we synthesize existing dune terminology and use the last two decades of research on dune morphodynamics to propose three complementary dune classification schemes based on: (1) descriptive dune gemorphology, (2) morphodynamic processes, and (3) fluid mechanics and physics of sediment transport. The first classification relates dune types to geomorphic setting, presence or absence of vegetation or obstacles, and dune shape (including planform shape, and cross-sectional symmetry or asymmetry). Dune classes can be further subdivided where the direction of sand transport is known independently. The second classification relates dune types and shapes to bed properties (sand-covered vs partially starved bed) and wind forcing (directional variability or the relative strengths and directions of wind modes) that together influence dune dynamics (growth, migration, elongation) and select the dominant processes by which dunes are shaped and oriented relative to the resultant transport direction. The third classification relates, for different planetary environments, the range of possible dune sizes, from minimum to maximum wavelength, to flow regime (rough or smooth) and response of sediment transport, which influence the coupling between sand bed topography, fluid flow, and sediment transport. These characteristic lengths are useful scales for comparative geomorphology. The three classification schemes provide complementary information. Together, they form a unified framework for geomorphologists, sedimentologists, geographers, physicists, and others to describe windblown sand dunes on Earth and beyond through their shape, dynamics, and size as a response to winds and boundary conditions
- …