Influence of oxide films on primary water stress corrosion cracking initiation of alloy 600

In the present study alloy 600 was tested in simulated pressurised water reactor (PWR) primary water, at 360 °C, under an hydrogen partial pressure of 30 kPa. These testing conditions correspond to the maximum sensitivity of alloy 600 to crack initiation. The resulting oxidised structures (corrosion scale and underlying metal) were characterised. A chromium rich oxide layer was revealed, the underlying metal being chromium depleted. In addition, analysis of the chemical composition of the metal close to the oxide scale had allowed to detect oxygen under the oxide scale and particularly in a triple grain boundary. Implication of such a finding on the crack initiation of alloy 600 is discussed. Significant diminution of the crack initiation time was observed for sample oxidised before stress corrosion tests. In view of these results, a mechanism for stress corrosion crack initiation of alloy 600 in PWR primary water was proposed

Tensor products and statistics

AbstractA dictionary between operator-based and matrix-based languages in multivariate statistical analysis is proposed. Then this formulary is applied to asymptotic factorial analyses, especially for giving asymptotic covariance matrices and operators in an explicit form. Finally, we present the mathematical foundations on which are based the functional tools, i.e. tensor products of linear spaces, of vectors, and of operators

PERFORMANCE OF TIMBER BOARD MODELS FOR PREDICTION OF LOCAL BENDING STIFFNESS AND STRENGTH – WITH APPLICATION ON DOUGLAS FIR SAWN TIMBER

Efficient utilization of structural timber requires accurate methods for machine strength grading. One of the most accurate methods presented this far is based on data of local fiber orientation on board surfaces, obtained from laser scanning. In this paper, two potential improvements of this method are examined. The first one consists of replacing a model based on simple integration over cross sections of boards for calculation of local bending stiffness by a 3D solid finite element (FE) model from which local bending stiffness is derived. The second improvement concerns replacement of a simple model for the fiber orientation in the interior of board by a more advanced one taking location of pith and growth direction of knots into account. Application of the alternative models on a sample of more than 200 Douglas fir boards, size 40 mm X 100 mm X 3000 mm, cut from large logs, show that each of the evaluated model improvements contributes to improved grading accuracy. When local bending stiffness is calculated utilizing the herein suggested FE model in combination with the improved model of fiber orientation in the interior of boards, a coefficient of determination to bending strength as high as 0.76 is obtained. For comparison, a coefficient of determination of 0.71 is obtain using the simpler original models

Loss of strength in Ni3Al at elevated temperatures

Stress decrease above the stress peak temperature (750 K) is studied in h123i single crystals of Ni3(Al, 3 at.% Hf ). Two thermally activated deformation mechanisms are evidenced on the basis of stress relaxation and strain rate change experiments. From 500 to 1070 K, the continuity of the activation volume/temperature curves reveals a single mechanism of activation enthalpy 3.8 eV/atom and volume 90 b3 at 810K with an athermal stress of 330 MPa. Over the very same temperature interval, impurity or solute diffusion towards dislocation cores is evidenced through serrated yielding, peculiar shapes of stress–strain curves while changing the rate of straining and stress relaxation experiments. This complicates the identification of the deformation mechanism, which is likely connected with cube glide. From 1070 to 1270 K, the high-temperature mechanism has an activation enthalpy and volume of 4.8 eV/atom and 20 b3, respectively, at 1250 K

Relation between composition, microstructure and oxidation in iron aluminides

The relation between chemical composition, microstructure and oxidation properties has been investigated on various FeAl based alloys, the aim being to induce changes in the microstructure of the compound by selective oxidation of aluminium. Oxidation kinetics that was evaluated on bulk specimens showed that, due to fast diffusion in the alloys, no composition gradient is formed during the aluminium selective oxidation. Accordingly, significant aluminium depletion in the compound could be observed in the thinnest part of oxidised wedge-shape specimens. Another way to obtain samples of variable aluminium content was to prepare diffusion couples with one aluminide and pure iron as end members. These latter specimens have been characterised using electron microscopy and first results of oxidation experiments are presented

Correspondences, an exhibition of installations : Peter Burgess et al

Correspondences, an exhibition of installations : Peter Burgess et al Catalogue of Exhibition held at the Tasmanian School of Art, University of Tasmania 4 July-20 July, 1984 Works by Peter Burgess, Peter Callas, Adrian Hall, Maryrose Sinn, Gregory Smith, Neil Stevenson, Alain Viguier, John Youn

Microstructural Characterization of Graphite Spheroids in Ductile Iron

The present work brings new insights by transmission electron microscopy allowing disregarding or supporting some of the models proposed for spheroidal growth of graphite in cast irons. Nodules consist of sectors made of graphite plates elongated along a hai direction and stack on each other with their c axis aligned with the radial direction. These plates are the elementary units for spheroidal growth and a calculation supports the idea that new units continuously nucleate at the ledge between sectors