XeCl laser pumped iodine laser using t-C4F9I

An iodine photodissociation laser using t-C4F9I as the active material was pumped by an XeCl laser. An iodine laser output energy of 3 mJ with pulse duration of 25 ns was obtained when the pumping pulse energy was 80 mJ, the iodide pressure was 70 torr, and the reflectance of the output mirror was 85 percent. The high pumping efficiency and low threshold pump power achieved in this experiment are attributable to the high absorption cross section at the pump laser wavelength (308 nm) of the iodide used

Direct solar-pumped iodine laser amplifier

The optimum conditions of a solar pumped iodine laser are found in this research for the case of a continuous wave operation and a pulsed operation. The optimum product of the pressure(p) inside the laser tube and the tube diameter(d) was pd=40 approx. 50 torr-cm on the contrary to the case of a high intensity flashlamp pumped iodine laser where the optimum value of the product is known to be pd=150 torr-cm. The pressure-diameter product is less than 1/3 of that of the high power iodine laser. During the research period, various laser materials were also studied for solar pumping. Among the laser materials, Nd:YAG is found to have the lowest laser threshold pumping intensity of about 200 solar constant. The Rhodamine 6G was also tested as the solar pumped laser material. The threshold pumping power was measured to be about 20,000 solar constant. The amplification experiment for a continuously pumped iodine laser amplifier was performed using Vortek solar simulator and the amplification factors were measured for single pass amplification and triple pass amplification of the 15 cm long amplifier tube. The amplification of 5 was obtained for the triple pass amplification

Direct solar-pumped iodine laser amplifier

A XeCl laser pumped iodine laser oscillator was developed which will be incorporated into the Master Oscillator Power Amplifier (MOPA) system. The developed XeCl laser produces output energy of about 60 mJ per pulse. The pulse duration was about 10 nsec. The kinetic model for the solar-pumped laser was refined and the algorithm for the calculation of a set of rate equations was improved to increase the accuracy and the efficiency of the calculation. The improved algorithm was applied to explain the existing experimental data taken from a flashlamp pumped iodine laser for three kinds of lasants, i-C3F7I, n-C4F9I, and t-C4F9I. Various solid laser materials were evaluated for solar-pumping. The materials studied were Nd:YAG, Nd:YLF, and Cr:Nd:GSGG crystals. The slope efficiency of 0.17 percent was measured for the Nd:YLF near the threshold pump intensity which was 211 solar constants (29W/sq cm). The threshold pump intensity of the Nd:YAG was measured to be 236 solar constants (32W/sq cm) and the near-threshold slope efficiency was 0.12 percent. True CW laser operation of Cr:Nd:GSGG was possible only at pump intensities less than or equal to 1,500 solar constants (203 W/sq cm). This fact was attributed to the high thermal focusing effect of the Cr:Nd:GSGG rod

Chuna (or Tuina) Manual Therapy for Musculoskeletal Disorders: A Systematic Review and Meta-Analysis of Randomized Controlled Trials

Objective. To review the literature and systematically evaluate the effectiveness of Chuna (or Tuina) manual therapy (C[T]MT) on pain and function for musculoskeletal disorders. Methods. We searched 15 English, Chinese, Japanese, and Korean databases using relevant keywords. All randomized controlled trials (RCTs) of C(T)MT for musculoskeletal disorders were considered, and we limited analyses to studies with a low-risk bias for randomization and/or allocation concealment. Results. Sixty-six RCTs with 6,170 participants were included. One sham-controlled RCT showed that C(T)MT relieved pain more effectively than a sham control (SMD -3.09 [-3.59, -2.59]). For active-controlled RCTs, pooled meta-analysis showed that C(T)MT had statistically significant effects on pain reduction, especially compared to traction (P<0.00001), drugs (P=0.04), and physical therapies (P<0.0001). For functional improvement, combined effects of C(T)MT with drugs (P=0.04) and traction (P=0.05) also showed similar positive effects. Conclusions. This systematic review suggests that C(T)MT is safe and effective for pain reduction and functional improvement for musculoskeletal diseases; however, the evidence for functional improvement was not as strong as for pain reduction. For future studies, high-quality RCTs such as sham-controlled studies with standardized interventions are needed to provide sufficient evidence on the effects of C(T)MT for musculoskeletal diseases. Protocol registration number is CRD42016038307 04/07/2016

A functional regulatory variant of MYH3 influences muscle fiber-type composition and intramuscular fat content in pigs

Muscle development and lipid accumulation in muscle critically affect meat quality of livestock. However, the genetic factors underlying myofiber-type specification and intramuscular fat (IMF) accumulation remain to be elucidated. Using two independent intercrosses between Western commercial breeds and Korean native pigs (KNPs) and a joint linkage-linkage disequilibrium analysis, we identified a 488.1-kb region on porcine chromosome 12 that affects both reddish meat color (a*) and IMF. In this critical region, only the MYH3 gene, encoding myosin heavy chain 3, was found to be preferentially overexpressed in the skeletal muscle of KNPs. Subsequently, MYH3-transgenic mice demonstrated that this gene controls both myofiber-type specification and adipogenesis in skeletal muscle. We discovered a structural variant in the promotor/regulatory region of MYH3 for which Q allele carriers exhibited significantly higher values of a* and IMF than q allele carriers. Furthermore, chromatin immunoprecipitation and cotransfection assays showed that the structural variant in the 5-flanking region of MYH3 abrogated the binding of the myogenic regulatory factors (MYF5, MYOD, MYOG, and MRF4). The allele distribution of MYH3 among pig populations worldwide indicated that the MYH3 Q allele is of Asian origin and likely predates domestication. In conclusion, we identified a functional regulatory sequence variant in porcine MYH3 that provides novel insights into the genetic basis of the regulation of myofiber type ratios and associated changes in IMF in pigs. The MYH3 variant can play an important role in improving pork quality in current breeding programs

A functional regulatory variant of MYH3 influences muscle fiber-type composition and intramuscular fat content in pigs

Muscle development and lipid accumulation in muscle critically affect meat quality of livestock. However, the genetic factors underlying myofiber-type specification and intramuscular fat (IMF) accumulation remain to be elucidated. Using two independent intercrosses between Western commercial breeds and Korean native pigs (KNPs) and a joint linkage-linkage disequilibrium analysis, we identified a 488.1-kb region on porcine chromosome 12 that affects both reddish meat color (a*) and IMF. In this critical region, only the MYH3 gene, encoding myosin heavy chain 3, was found to be preferentially overexpressed in the skeletal muscle of KNPs. Subsequently, MYH3-transgenic mice demonstrated that this gene controls both myofiber-type specification and adipogenesis in skeletal muscle. We discovered a structural variant in the promotor/regulatory region of MYH3 for which Q allele carriers exhibited significantly higher values of a* and IMF than q allele carriers. Furthermore, chromatin immunoprecipitation and cotransfection assays showed that the structural variant in the 5′-flanking region of MYH3 abrogated the binding of the myogenic regulatory factors (MYF5, MYOD, MYOG, and MRF4). The allele distribution of MYH3 among pig populations worldwide indicated that the MYH3 Q allele is of Asian origin and likely predates domestication. In conclusion, we identified a functional regulatory sequence variant in porcine MYH3 that provides novel insights into the genetic basis of the regulation of myofiber type ratios and associated changes in IMF in pigs. The MYH3 variant can play an important role in improving pork quality in current breeding programs.info:eu-repo/semantics/publishedVersio

Clinical pharmacokinetics of norfloxacin-glycine acetate after intravenous and oral administration in pigs

The pharmacokinetics and dosage regimen of norfloxacin-glycine acetate (NFLXGA) was investigated in pigs after a single intravenous (i.v.) or oral (p.o.) administration at a dosage of 7.2 mg/kg body weight. After both i.v. and p.o. administration, plasma drug concentrations were best fitted to an open two-compartment model with a rapid distribution phase. After i.v. administration of NFLXGA, the distribution (t1/2α) and elimination half-life (t1/2β) were 0.36 ± 0.07 h and 7.42 ± 3.55 h, respectively. The volume of distribution of NFLXGA at steady state (Vdss) was 4.66 ± 1.39 l/kg. After p.o. administration of NFLXGA, the maximal absorption concentration (Cmax) was 0.43 ± 0.06 µg/ml at 1.36 ± 0.39 h (Tmax). The mean absorption (t1/2ka) and elimination half-life (t1/2β) of NFLXGA were 0.78 ± 0.27 h and 7.13 ± 1.41 h, respectively. The mean systemic bioavailability (F) after p.o. administration was 31.10 ± 15.16%. We suggest that the optimal dosage calculated from the pharmacokinetic parameters is 5.01 mg/kg per day i.v. or 16.12 mg/kg per day p.o

Effect of shared decision-making education on physicians’ perceptions and practices of end-of-life care in Korea

Background Evidence of the ethical appropriateness and clinical benefits of shared decision-making (SDM) are accumulating. This study aimed to not only identify physicians’ perspectives on SDM, and practices related to end-of-life care in particular, but also to gauge the effect of SDM education on physicians in Korea. Methods A 14-item questionnaire survey using a modified Delphi process was delivered to nephrologists and internal medicine trainees at 17 university hospitals. Results A total of 309 physicians completed the survey. Although respondents reported that 69.9% of their practical decisions were made using SDM, 59.9% reported that it is not being applied appropriately. Only 12.3% of respondents had received education on SDM as part of their training. The main obstacles to appropriate SDM were identified as lack of time (46.0%), educational materials and tools (29.4%), and education on SDM (24.3%). Although only a few respondents had received training on SDM, the proportion of those who thought they were using SDM appropriately in actual practice was high; the proportion of those who chose lack of time and education as factors that hindered the proper application of SDM was low. Conclusion The majority of respondents believed that SDM was not being implemented properly in Korea, despite its use in actual practice. To improve the effectiveness of SDM in the Korean medical system, appropriate training programs and supplemental policies that guarantee sufficient application time are required