40,987 research outputs found
Theoretical analysis of the electrical aspects of the basic electro-impulse problem in aircraft de-icing applications
A summary of modeling the electrical system aspects of a coil and metal target configuration resembling a practical electro-impulse deicing (EIDI) installation, and a simple circuit for providing energy to the coil, was presented. The model was developed in sufficient theoretical detail to allow the generation of computer algorithms for the current in the coil, the magnetic induction on both surfaces of the target, the force between the coil and target, and the impulse delivered to the target. These algorithms were applied to a specific prototype EIDI test system for which the current, magnetic fields near the target surfaces, and impulse were previously measured
Sonic-boom measurements in the focus region during the ascent of Apollo 17
Sonic-boom pressure signatures recorded during the ascent phase of Apollo 17 are presented. The measurements were obtained onboard six U.S. Navy ships positioned along the ground track of the spacecraft vehicle in the area of expected focus resulting from the flight path and acceleration of the vehicle. Tracings of the measured signatures are presented along with values of the maximum positive overpressure, positive impulse, signature duration, and bowshock rise time. Also included are brief descriptions of the ships and their location, the deployment of the sonic-boom instrumentation, flight profiles and operating conditions for the launch vehicle and spacecraft, surface-weather and sea-state information at the measuring sites, and high-altitude weather information for the general measurement areas. Comparisons of the measured and predicted sonic-boom overpressures for the Apollo 17 mission are presented. The measured data are also compared with data from the Apollo 15 and 16 missions and data from flight test programs of various aircraft
Study of the effect of scattering from turbid water on the polarization of a laser beam
A Monte Carlo simulation method was used to determine the effect of scattering from turbid water on the polarization of a backscattered beam of laser light. The relationship between the polarization and the type and amount of suspended particulates in the water was investigated
THEME OVERVIEW: FARMLAND VALUES
Farmland, Land Values, Farm Real Estate, Land Economics/Use, Q14, Q15,
Sonic-boom ground pressure measurements from the launch and reentry of Apollo 16
Sonic-boom pressure signatures recorded during the launch and reentry phases of the Apollo 16 mission are presented. Five measurements were obtained along the vehicle ground track: 69 km (37.3 n. mi.) 92 km (49.8 n. mi.), and 130 km (70.3 n. mi.) down range from the launch site during ascent, and at 185 km (100 n. mi.) and approximately 5.5 km (3 n. mi.) from the splash-down point during reentry. Tracings of the measured signatures are included along with values of the overpressure, impulse, time duration, and rise times. Also included are brief descriptions of the launch and recovery test areas in which the measurements were obtained, the sonic-boom instrumentation deployment, flight profiles, and operating conditions for the launch vehicle and spacecraft, surface weather information at the measuring sites, and high-altitude weather information for the general measurement areas. Comparisons of the sonic-boom overpressures from Apollo 15 and 16 along with those from current aircraft are also presented
Variability in airplane noise measurements
Aircraft position and meteorological effects on accuracy of acoustic measurements for turbojet engine
Understanding Current Signals Induced by Drifting Electrons
Consider an electron drifting in a gas toward a collection electrode. A
common misconception is that the electron produces a detectable signal only
upon arrival at the electrode. In fact, the situation is quite the opposite.
The electron induces a detectable current in the electrode as soon as it starts
moving through the gas. This induced current vanishes when the electron arrives
at the plate. To illustrate this phenomenon experimentally, we use a gas-filled
parallel plate ionization chamber and a collimated Am alpha source,
which produces a track of a fixed number of ionization electrons at a constant
distance from the collection electrode. We find that the detected signal from
the ionization chamber grows with the electron drift distance, as predicted by
the model of charge induction, and in conflict with the idea that electrons are
detectable upon arrival at the collection plate.Comment: 21 pages, 12 figure
Results of the flight noise measurement program using a standard and modified SH-3A helicopter
A field noise measurement program has been conducted using both a standard SH-3A helicopter and an SH-3A helicopter modified to reduce external noise levels. Modifications included reducing rotor speed, increasing the number of rotor blades, modifying the blade-tip shapes, and acoustically treating the engine air intakes and exhaust. The purpose of this study was to document the noise characteristics recorded on the ground of each helicopter during flyby, hover, landing, and take-off operations. Based on an analysis of the measured results, the average of the overhead, overall, ontrack noise levels was approximately 4 db lower for the modified helicopter than for the standard helicopter. The improved in-flight noise characteristics, and associated small footprint areas and time durations, were judged to be mainly due to tail-rotor noise reductions. The noise reductions were obtained at the expense of required power increases at airspeeds greater than 70 knots for the modified helicopter
Results of the noise measurement program on a standard and modified OH-6A helicopter
A field noise measurement program has been conducted on a standard OH-6A helicopter and one that had been modified by reducing the rotor speed, altering rotor tip shape, and treating the engine exhaust and inlet to reduce the external noise levels. The modifications consisted of extensive aircraft design changes resulting in substantial noise reductions following state-of-art noise reduction techniques. The purpose of this study was to document the ground noise characteristics of each helicopter during flyover, hover, landing, and take-off operations. Based on an analysis of the measured results, the average of the overall on-track noise levels of the final modified helicopter was approximately 14 db lower than that for the standard helicopter. Narrow-band-spectra data of the hovering helicopter show a reduction in the overall noise due to the reductions achieved for the lifting main and antitorque tail rotor, engine exhaust, and gear box noise for the modified helicopter. The noise results of the test program are found to correlate generally with noise measurements made previously on this type of aircraft
DOES RURAL JOB GROWTH LEAD THE ECONOMY OUT OF RECESSION?
This paper explores the dynamics of rural and non-rural job growth to investigate if job growth starts in rural places, making it one of the leading indicators of economic growth. Empirical results provide mixed evidence. The mixed results of the Granger non-causality tests could be sensitive to the non-rural area definition. The relationship between rural job growth and non-rural job growth is not restricted to post-recession periods. Analysis of Bureau of Labor Statistics data suggests the spillover effects of non-rural growth are larger than the spillover effect of rural growth on non-rural areas. But this positive response of rural growth disappears over time and turns sharply negative. In the long run, "backwash" effects outweigh "spread" effects.Community/Rural/Urban Development,
- …