103 research outputs found
Spatiotemporal changes in aerosol properties by hygroscopic growth and impacts on radiative forcing and heating rates during DISCOVER-AQ 2011
This research has been supported by the H2020 Marie Sklodowska-Curie Actions (grant no. 778349), the Spanish Ministry of Economy and Competitiveness (RTI2018101154.A.I00), and by the Russian Science Foundation (project 2117-00114, entitled Development of lidar retrieval algorithms).This work focuses on the characterization of vertically resolved aerosol hygroscopicity properties and their direct radiative effects through a unique combination of ground-based and airborne remote sensing measurements during the Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) 2011 field campaign in the Baltimore-Washington DC metropolitan area. To that end, we combined aerosol measurements from a multiwavelength Raman lidar located at NASA Goddard Space Flight Center and the airborne NASA Langley High Spectral Resolution Lidar-1 (HSRL-1) lidar system. In situ measurements aboard the P-3B airplane and ground-based Aerosol Robotic Network - Distributed Regional Aerosol Gridded Observational Network (AERONET-DRAGON) served to validate and complement quantifications of aerosol hygroscopicity from lidar measurements and also to extend the study both temporally and spatially. The focus here is on 22 and 29 July 2011, which were very humid days and characterized by a stable atmosphere and increasing relative humidity with height in the planetary boundary layer (PBL). Combined lidar and radiosonde (temperature and water vapor mixing ratio) measurements allowed the retrieval of the Hanel hygroscopic growth factor which agreed with that obtained from airborne in situ measurements and also explained the significant increase of extinction and backscattering with height. Airborne measurements also confirmed aerosol hygroscopicity throughout the entire day in the PBL and identified sulfates and water-soluble organic carbon as the main species of aerosol particles. The combined Raman and HSRL-1 measurements permitted the inversion for aerosol microphysical properties revealing an increase of particle radius with altitude consistent with hygroscopic growth. Aerosol hygroscopicity pattern served as a possible explanation of aerosol optical depth increases during the day, particularly for fine-mode particles. Lidar measurements were used as input to the libRadtran radiative transfer code to obtain vertically resolved aerosol radiative effects and heating rates under dry and humid conditions, and the results reveal that aerosol hygroscopicity is responsible for larger cooling effects in the shortwave range (7-10 W m(-2) depending on aerosol load) near the ground, while heating rates produced a warming of 0.12 K d(-1) near the top of PBL where aerosol hygroscopic growth was highest.H2020 Marie Sklodowska-Curie Actions 778349Spanish Ministry of Economy and Competitiveness RTI2018101154.A.I00Russian Science Foundation (RSF) 2117-0011
Crossover in the nature of the metallic phases in the perovskite-type RNiO_3
We have measured the photoemission spectra of NdSmNiO,
where the metal-insulator transition and the N\'{e}el ordering occur at the
same temperature for and the metal-insulator transition
temperature () is higher than the N\'{e}el temperature for . For , the spectral intensity at the Fermi level is high in the
metallic phase above and gradually decreases with cooling in the
insulating phase below while for it shows a pseudogap-like
behavior above and further diminishes below . The results
clearly establish that there is a sharp change in the nature of the electronic
correlations in the middle () of the metallic phase of the
NiO system.Comment: 4 pages, 4 figure, submitted to Phys. Rev.
Développement d’une méthodologie multi-échelle pour la planification de systèmes de drainage urbain durables. Étude de cas: Bogotá, Colombie
Impact of mineral dust on short wave and long wave radiation: evaluation of different vertically resolved parameterization sin 1-D radiative transfer computations
Aerosol radiative properties are investigated in southeastern Spain during a dust event on 16–17 June 2013 in the framework of the ChArMEx/ADRIMED (Chemistry-Aerosol Mediterranean Experiment/Aerosol Direct Radiative Impact on the regional climate in the MEDiterranean region) campaign. Particle optical and microphysical properties from ground-based sun/sky photometer and lidar measurements, as well as in situ measurements on board the SAFIRE ATR 42 French research aircraft, are used to create a set of different levels of input parameterizations, which feed the 1-D radiative transfer model (RTM) GAME (Global Atmospheric ModEl). We consider three datasets: (1) a first parameterization based on the retrievals by an advanced aerosol inversion code (GRASP; Generalized Retrieval of Aerosol and Surface Properties) applied to combined photometer and lidar data, (2) a parameterization based on the photometer columnar optical properties and vertically resolved lidar retrievals with the two-component Klett–Fernald algorithm, and (3) a parameterization based on vertically resolved optical and microphysical aerosol properties measured in situ by the aircraft instrumentation. Once retrieved, the outputs of the RTM in terms of both shortwave and longwave radiative fluxes are compared against ground and in situ airborne measurements. In addition, the outputs of the model in terms of the aerosol direct radiative effect are discussed with respect to the different input parameterizations. Results show that calculated atmospheric radiative fluxes differ no more than 7 % from the measured ones. The three parameterization datasets produce a cooling effect due to mineral dust both at the surface and the top of the atmosphere. Aerosol radiative effects with differences of up to 10 W m−2 in the shortwave spectral range (mostly due to differences in the aerosol optical depth) and 2 W m−2 for the longwave spectral range (mainly due to differences in the aerosol optical depth but also to the coarse mode radius used to calculate the radiative properties) are obtained when comparing the three parameterizations. The study reveals the complexity of parameterizing 1-D RTMs as sizing and characterizing the optical properties of mineral dust is challenging. The use of advanced remote sensing data and processing, in combination with closure studies on the optical and microphysical properties from in situ aircraft measurements when available, is recommended.This work is part of the ChArMEx project supported by CNRS-INSU, ADEME, Météo-France, and CEA in the framework of the multidisciplinary program MISTRALS (Mediterranean Integrated STudies at Regional And Local Scales; http://mistrals-home.org/, last access: 15 January 2018). Lidar measurements were supported by the ACTRIS (Aerosols, Clouds, and Trace Gases Research Infrastructure Network) Research Infrastructure Project funded by the European Union's Horizon 2020 research and innovation program under grant agreement no. 654109. The Barcelona team acknowledges the Spanish Ministry of Economy and Competitiveness (project TEC2015-63832-P) and EFRD (European Fund for Regional Development); the Department of Economy and Knowledge of the Catalan autonomous government (grant 2014 SGR 583) and the Unidad de Excelencia Maria de Maeztu (project MDM-2016-0600) financed by the Spanish Agencia Estatal de Investigación. The authors also thank the Spanish Ministry of Science, Innovation and Universities (ref. CGL2017-90884-REDT). This work was also supported by the Juan de la Cierva-Formación program (grant FJCI-2015-23904). Paola Formenti and Cyrielle Denjean acknowledge the support of the French National Research Agency (ANR) through the ADRIMED program (contract ANR-11-BS56-0006)
Simuladores de Planificadores de Sistemas en Tiempo Real
En este artÃculo se presenta un simulador desarrollado que permite ejecutar diferentes planificadores de Tiempo Real, como el algoritmo de planificación cÃclica, Algoritmo de la Razón Monótona (RMA) y EDF (Earliest
Deadline First) para un conjunto de procesos con unos datos dados y muestra
los resultados obtenidos. Mediante este simulador se facilita a los alumnos el
aprendizaje de los algoritmos de planificación.This paper presents a simulator that has been developed to allow the execution of scheduling algorithms such as the Cyclic NonÂpreemptive Executive, RateÂmonotonic scheduling (RMS) and Earliest Deadline First
(EDF) for a given set of processes with different values and the simulator displays the results. With this simulator, students are able to learn about scheduling algorithms.Universidad de Granada: Departamento de Arquitectura y TecnologÃa de Computadores; Vicerrectorado para la GarantÃa de la Calidad
Contribution of EARLINET/ACTRIS to the summer 2013 Special Observing Period of the ChArMEx project: monitoring of a Saharan dust event over the western and central Mediterranean
In the framework of the Chemistry-Aerosol Mediterranean
Experiment (ChArMEx; http://charmex.lsce.ipsl.fr/) initiative, a
field campaign took place in the western Mediterranean Basin
between 10 June and 5 July 2013 within the ADRIMED (Aerosol
Direct Radiative Impact on the regional climate in the
MEDiterranean region) project. The scientific objectives of
ADRIMED are the characterization of the most common
‘Mediterranean aerosols’ and their direct radiative forcing (column
closure and regional scale). During 15–24 June a multiintrusion
dust event took place over the western and central
Mediterranean Basin. Extra measurements were carried out by
some EARLINET/ACTRIS (European Aerosol Research Lidar
Network /Aerosols, Clouds, and Trace gases Research
InfraStructure Network, http://www.actris.net/) lidar stations in
Spain and Italy, in particular on 22 June in support to the flight
over southern Italy of the Falcon 20 aircraft involved in the
campaign. This article describes the physical and optical properties
of dust observed at the different lidar stations in terms ofdust plume centre of mass, optical depth, lidar ratio, and particle
depolarization ratio. To link the differences found in the
origin of dust plumes, the results are discussed on the basis
of back-trajectories and air- and space-borne lidars. This work
puts forward the collaboration between a European research
infrastructure (ACTRIS) and an international project (ChArMEx)
on topics of interest for both parties, and more generally for the
atmospheric community.Published4698-47114A. Clima e OceaniJCR Journalrestricte
Diseño estructural de carcasa para impresoras 3D RepRab
Uno de los problemas fundamentales de algunas impresoras 3D hace referencia al control de la temperatura en el momento de la impresión. Este efecto denominado "warping" sucede al depositar plástico caliente que es enfriado rápidamente induciendo una contracción que provoca que las capas superiores "arrastren" de las inferiores y que la base se levante y despegue.
Este trabajo presenta el diseño y construcción de una carcasa, para los modelos RepRap (Replicating Rapid Prototyper), que mejore y garantice el entorno de las operaciones de impresión 3D y el resultado final.
El producto es modulable y adaptable a los modelos de impresoras RepRap del mercado, capaz de controlar el ambiente en el interior del habitáculo, permitiendo un máximo ahorro de material en su fabricación, reduciendo los costes por reprocesado en la fabricación de piezas, permitiendo una máxima visibilidad del interior, una utilización de materiales respetuosos con el medio ambiente y una facilidad de montaje, Design for assembly.
El diseño de las piezas se realizó de forma que permitiese el cumplimiento de las limitaciones de impresión en cuanto a tamaño, complejidad geométrica, regla de los 45o, precisión de capa, margen de tolerancias, orientación en la base de impresión para mejorar la funcionalidad y la resistencia mecánica.Universidad de Málaga. Campus de Excelencia Internacional AndalucÃa Tech
Validation of the TOLNet lidars: the Southern California Ozone Observation Project (SCOOP)
The North America-based Tropospheric Ozone Lidar Network (TOLNet)
was recently established to provide high spatiotemporal vertical profiles of
ozone, to better understand physical processes driving tropospheric ozone
variability and to validate the tropospheric ozone measurements of upcoming
spaceborne missions such as Tropospheric Emissions: Monitoring Pollution
(TEMPO). The network currently comprises six tropospheric ozone lidars, four
of which are mobile instruments deploying to the field a few times per year,
based on campaign and science needs. In August 2016, all four mobile TOLNet
lidars were brought to the fixed TOLNet site of JPL Table Mountain Facility
for the 1-week-long Southern California Ozone Observation Project (SCOOP).
This intercomparison campaign, which included 400 h of lidar measurements
and 18 ozonesonde launches, allowed for the unprecedented simultaneous
validation of five of the six TOLNet lidars. For measurements between 3 and
10 km a.s.l., a mean difference of 0.7 ppbv (1.7 %), with a
root-mean-square deviation of 1.6 ppbv or 2.4 %, was found between the
lidars and ozonesondes, which is well within the combined uncertainties of
the two measurement techniques. The few minor differences identified were
typically associated with the known limitations of the lidars at the profile
altitude extremes (i.e., first 1 km above ground and at the instruments'
highest retrievable altitude). As part of a large homogenization and quality
control effort within the network, many aspects of the TOLNet in-house data
processing algorithms were also standardized and validated. This thorough
validation of both the measurements and retrievals builds confidence as to the
high quality and reliability of the TOLNet ozone lidar profiles for many
years to come, making TOLNet a valuable ground-based reference network for
tropospheric ozone profiling.</p
Raman and infrared spectroscopy of Sr2B′UO6 (B′ = Ni; Co) double perovskites
Temperature dependent normal modes and lattice thermal expansion of Sr 2B′UO6 (B′ = Ni, Co) double perovskites were investigated by Raman/infrared spectroscopies and synchrotron X-ray diffraction, respectively. Monoclinic crystal structures with space group P21/n were confirmed for both compounds, with no clear structural phase transition between 10 and 400 K. As predicted for this structure, the first-order Raman and infrared spectra show a plethora of active modes. In addition, the Raman spectra reveal an enhancement of the integrated area of an oxygen stretching mode, which is also observed in higher-order Raman modes, and an anomalous softening of ∼1 cm-1 upon cooling below T* ∼ 300 K. In contrast, the infrared spectra show conventional temperature dependence. The band profile phonon anomalies are possibly related to an unspecified electronic property of Sr2B′UO6 (B′ = Ni, Co).Centro de QuÃmica Inorgánic
- …