11 research outputs found
Magnetization Behaviour of Nanocrystalline Permalloy Thin Films Prepared Using Oblique-angle Magnetron Sputtering Technique
In the current work, nanocrystalline Fe0.5Ni0.5 magnetic thin films were deposited on a Si(100) substrate using the oblique-angle sputtering technique with the oblique deposition angle ranging from 11.5 to 45°. Structure, static magnetic properties, and dynamic magnetic characteristics were evaluated as a function of the deposition angle. The results indicate that the nanocrystalline FCC phase of FeNi with (111) preferred orientation and the average crystallite size of 6.3-9.3 nm was deposited successfully. The measured value of the uniaxial anisotropy field shows an increment from 7.65 to 16.71 Oe as the oblique angle rises from 11.5 to 45°, which in turn leads to an increase in the ferromagnetic resonance frequency from 0.63 to 0.88 GHz
Parametric optimization of NiFe2O4 nanoparticles synthesized by mechanical alloying
In this study, the Taguchi robust design method is used for optimizing ball milling parameters including milling time, rotation speed and ball to powder weight ratio in the planetary ball milling of nanostructured nickel ferrite powder. In fact, the current work deals with NiFe2O4 nanoparticles mechanochemically synthesized from NiO and Fe2O 3 powders. The Taguchi robust design technique of system optimization with the L9 orthogonal array is performed to verify the best experimental levels and contribution percentages (% ρ) of each parameter. Particle size measurement using SEM gives the average particle size value in the range of 59-67 nm. X-ray diffraction using Cu Kα radiation is also carried out to identify the formation of NiFe2O4 single phase. The XRD results suggest that NiFe2O4 with a crystallite size of about 12 nm is present in 30 h activated specimens. Furthermore, based on the results of the Taguchi approach the greatest effect on particle size (42.10 %) is found to be due to rotation speed followed by milling time (37.08 %) while ball to powder weight ratio exhibits the least influence