39 research outputs found
Polarimetric SAR Image Segmentation with B-Splines and a New Statistical Model
We present an approach for polarimetric Synthetic Aperture Radar (SAR) image
region boundary detection based on the use of B-Spline active contours and a
new model for polarimetric SAR data: the GHP distribution. In order to detect
the boundary of a region, initial B-Spline curves are specified, either
automatically or manually, and the proposed algorithm uses a deformable
contours technique to find the boundary. In doing this, the parameters of the
polarimetric GHP model for the data are estimated, in order to find the
transition points between the region being segmented and the surrounding area.
This is a local algorithm since it works only on the region to be segmented.
Results of its performance are presented
The Roles of the S3MPC: Monitoring, Validation and Evolution of Sentinel-3 Altimetry Observations
The Sentinel-3 Mission Performance Centre (S3MPC) is tasked by the European Space Agency (ESA) to monitor the health of the Copernicus Sentinel-3 satellites and ensure a high data quality to the users. This paper deals exclusively with the effort devoted to the altimeter and microwave radiometer, both components of the Surface Topography Mission (STM). The altimeters on Sentinel-3A and -3B are the first to operate in delay-Doppler or SAR mode over all Earth surfaces, which enables better spatial resolution of the signal in the along-track direction and improved noise reduction through multi-looking, whilst the radiometer is a two-channel nadir-viewing system. There are regular routine assessments of the instruments through investigation of telemetered housekeeping data, calibrations over selected sites and comparisons of geophysical retrievals with models, in situ data and other satellite systems. These are performed both to monitor the daily production, assessing the uncertainties and errors on the estimates, and also to characterize the long-term performance for climate science applications. This is critical because an undetected drift in performance could be misconstrued as a climate variation. As the data are used by the Copernicus Services (e.g., CMEMS, Global Land Monitoring Services) and by the research community over open ocean, coastal waters, sea ice, land ice, rivers and lakes, the validation activities encompass all these domains, with regular reports openly available. The S3MPC is also in charge of preparing improvements to the processing, and of the development and tuning of algorithms to improve their accuracy. This paper is thus the first refereed publication to bring together the analysis of SAR altimetry across all these different domains to highlight the benefits and existing challenges
420,000 year assessment of fault leakage rates shows geological carbon storage is secure
Carbon capture and storage (CCS) technology is routinely cited as a cost effective tool for climate change mitigation. CCS can directly reduce industrial CO2 emissions and is essential for the retention of CO2 extracted from the atmosphere. To be effective as a climate change mitigation tool, CO2 must be securely retained for 10,000 years (10 ka) with a leakage rate of below 0.01% per year of the total amount of CO2 injected. Migration of CO2 back to the atmosphere via leakage through geological faults is a potential high impact risk to CO2 storage integrity. Here, we calculate for the first time natural leakage rates from a 420 ka paleo-record of CO2 leakage above a naturally occurring, faulted, CO2 reservoir in Arizona, USA. Surface travertine (CaCO3) deposits provide evidence of vertical CO2 leakage linked to known faults. U-Th dating of travertine deposits shows leakage varies along a single fault and that individual seeps have lifespans of up to 200 ka. Whilst the total volumes of CO2 required to form the travertine deposits are high, time-averaged leakage equates to a linear rate of less than 0.01%/yr. Hence, even this natural geological storage site, which would be deemed to be of too high risk to be selected for engineered geologic storage, is adequate to store CO2 for climate mitigation purposes
Dealing with the non-detected and non-quantified data. The example of the serum dioxin data in the French dioxin and incinerators study
Dioxins in human milk from different regions of France: Pilot of the French longitudinal study of children (ELFE).
Factors explaining variation in serum dioxin concentrations for the specific congeners in the French dioxin and incinerators study
Dioxins in Human Milk from Different Regions of France: Pilot of the French Longitudinal Study of Children (ELFE)
SARAL/AltiKa Wet Tropospheric Correction: In-Flight Calibration, Retrieval Strategies and Performances
International audienceThe SARAL/AltiKa mission is a complement of the Jason altimeter series. A two-channels (23.8 GHz and 37 GHz) microwave radiometer (MWR) is combined to the altimeter in order to correct the altimeter range for the excess path delay (referred as WTC for wet tropospheric correction. First, the in-flight calibration of AltiKa MWR is assessed from a systematic comparison to other radiometers using a complete set of metrics (comparison to simulations and over geophysical targets). Then the “mixed” empirical approach successfully used for Envisat shows nonoptimal performances for the WTC retrieval. In order to find the potential sources of issues, this method is compared to a purely empirical relationship established between measured brightness temperatures (TB) and altimeter backscattering coefficient () on one hand and modeled WTC on the other hand. Various retrieval configurations for both AltiKa MWR and advanced microwave radiometer (AMR) on Jason-2, are for the first time systematically compared with respect to their performances against the variance of sea surface height differences at crossovers. Finally, the issues on the “mixed” approach are attributed to the differences between simulated and measured at Ka-band. Now, a configuration of the empirical approach proved to have performances closed to what is initially expected with the “mixed” approach