Mechanisms for current-induced conductivity changes in a conducting polymer

A layer of polyethylene dioxythiophene:polystyrene sulfonic acid (PEDT:PSS) spun onto the surface of an inorganic semiconductor forms a highly asymmetric rectifying junction when a small current is applied and can be permanently open circuited with application of a high current density. This allows the polymer/semiconductor junction to function as a write-once-read-many-times memory element. We use x-ray photoelectron spectroscopy and temperature induced conductivity measurements to study the morphological and chemical changes responsible for the large current-induced conductivity changes. It is found that by applying a large current to the organic-inorganic semiconductor rectifying heterojunction structure Au/PEDT:PSS/SiAu∕PEDT:PSS∕Si, the ratio of PEDT+PEDT+ to PSS−PSS− near the interface changes due to phase segregation in the presence of both high electric field (>105 V/cm)(>105V∕cm) and temperature. This leads to a decrease in film conductivity by up to six orders of magnitude from its value in the conductive state.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/87796/2/142109_1.pd

Stark Tuning of Donor Electron Spins in Silicon

We report Stark shift measurements for 121Sb donor electron spins in silicon using pulsed electron spin resonance. Interdigitated metal gates on top of a Sb-implanted 28Si epi-layer are used to apply electric fields. Two Stark effects are resolved: a decrease of the hyperfine coupling between electron and nuclear spins of the donor and a decrease in electron Zeeman g-factor. The hyperfine term prevails at X-band magnetic fields of 0.35T, while the g-factor term is expected to dominate at higher magnetic fields. A significant linear Stark effect is also resolved presumably arising from strain.Comment: 10 pages, 4 figures, to be submitted to PR

Role of N-glycosylation in renal betaine transport

The osmolyte and folding chaperone betaine is transported by the renal Na+-coupled GABA (γ-aminobutyric acid) symporter BGT-1 (betaine/GABA transporter 1), a member of the SLC6 (solute carrier 6) family. Under hypertonic conditions, the transcription, translation and plasma membrane (PM) insertion of BGT-1 in kidney cells are significantly increased, resulting in elevated betaine and GABA transport. Re-establishing isotonicity involves PM depletion of BGT-1. The molecular mechanism of the regulated PM insertion of BGT-1 during changes in osmotic stress is unknown. In the present study, we reveal a link between regulated PM insertion and N-glycosylation. Based on homology modelling, we identified two sites (Asn171 and Asn183) in the extracellular loop 2 (EL2) of BGT-1, which were investigated with respect to trafficking, insertion and transport by immunogold-labelling, electron microscopy (EM), mutagenesis and two-electrode voltage clamp measurements in Xenopus laevis oocytes and uptake of radiolabelled substrate into MDCK (Madin–Darby canine kidney) and HEK293 (human embryonic kidney) cells. Trafficking and PM insertion of BGT-1 was clearly promoted by N-glycosylation in both oocytes and MDCK cells. Moreover, association with N-glycans at Asn171 and Asn183 contributed equally to protein activity and substrate affinity. Substitution of Asn171 and Asn183 by aspartate individually caused no loss of BGT-1 activity, whereas the double mutant was inactive, suggesting that N-glycosylation of at least one of the sites is required for function. Substitution by alanine or valine at either site caused a dramatic loss in transport activity. Furthermore, in MDCK cells PM insertion of N183D was no longer regulated by osmotic stress, highlighting the impact of N-glycosylation in regulation of this SLC6 transporter

Competitive Advantages and Values Created and Attained Out of Well-Crafted Customer Value Propositions

To help facilitate the development of a theoretically rigorous and practically useful theory of customer value propositions (CVP), as called for repeatedly by the extant literature, this paper establishes a game-theoretic theorem regarding the dynamics of market competition and potential market entry. On top of this result and by employing logical rigor and analytical reasoning, eight generally true facts are developed without suffering from the constraints of data- and anecdote- based approaches, as widely used in the literature. In particular, these established results reveal how a newly adopted CVP is associated with the three essential processes underlying a company’s operation, how it will be pivotal for the company to attain competitive advantages, how the value added by adopted CVPs can be determined, etc. At the end, recommendations for decision-making managers and entrepreneurs and potential questions for future research are provided

The Kepler Science Operations Center Pipeline Framework Extensions

The Kepler Science Operations Center (SOC) is responsible for several aspects of the Kepler Mission, including managing targets, generating on-board data compression tables, monitoring photometer health and status, processing the science data, and exporting the pipeline products to the mission archive. We describe how the generic pipeline framework software developed for Kepler is extended to achieve these goals, including pipeline configurations for processing science data and other support roles, and custom unit of work generators that control how the Kepler data are partitioned and distributed across the computing cluster. We describe the interface between the Java software that manages the retrieval and storage of the data for a given unit of work and the MATLAB algorithms that process these data. The data for each unit of work are packaged into a single file that contains everything needed by the science algorithms, allowing these files to be used to debug and evolve the algorithms offline

Engineering Temperature‐Dependent Carrier Concentration in Bulk Composite Materials via Temperature‐Dependent Fermi Level Offset

Precise control of carrier concentration in both bulk and thin‐film materials is crucial for many solid‐state devices, including photovoltaic cells, superconductors, and high mobility transistors. For applications that span a wide temperature range (thermoelectric power generation being a prime example) the optimal carrier concentration varies as a function of temperature. This work presents a modified modulation doping method to engineer the temperature dependence of the carrier concentration by incorporating a nanosize secondary phase that controls the temperature‐dependent doping in the bulk matrix. This study demonstrates this technique by de‐doping the heavily defect‐doped degenerate semiconductor GeTe, thereby enhancing its average power factor by 100% at low temperatures, with no deterioration at high temperatures. This can be a general method to improve the average thermoelectric performance of many other materials.Temperature‐dependent modulation doping is demonstrated in a GeTe–CuInTe2 composite material. Temperature‐dependent carrier concentration is achieved by controlling the temperature‐dependent Fermi level offset between the GeTe matrix and CuInTe2 inclusions. An enhanced average power factor over a wide temperature range is demonstrated.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/141881/1/aenm201701623.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/141881/2/aenm201701623-sup-0001-S1.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/141881/3/aenm201701623_am.pd

Systematic Control of the Orientation of Organic Phosphorescent Pt Complexes in Thin Films for Increased Optical Outcoupling

Orienting light‐emitting molecules relative to the substrate is an effective method to enhance the optical outcoupling of organic light‐emitting devices. Platinum(II) phosphorescent complexes enable facile control of the molecular alignment due to their planar structures. Here, the orientation of Pt(II) complexes during the growth of emissive layers is controlled by two different methods: modifying the molecular structure and using structural templating. Molecules whose structures are modified by adjusting the diketonate ligand of the Pt complex, dibenzo‐(f,h)quinoxaline Pt dipivaloylmethane, (dbx)Pt(dpm), show an ≈20% increased fraction of horizontally aligned transition dipole moments compared to (dbx)Pt(dpm) doped into a 4,4′‐bis(N‐carbazolyl)‐1,1′‐biphenyl, CBP, host. Alternatively, a template composed of highly ordered 3,4,9,10‐perylenetetracarboxylic dianhydride monolayers is predeposited to drive the alignment of a subsequently deposited emissive layer comprising (2,3,7,8,12,13,17,18‐octaethyl)‐21H,23H‐porphyrinplatinum(II) doped into triindolotriazine. This results in a 60% increase in horizontally aligned transition dipole moments compared to the film deposited in the absence of the template. The findings provide a systematic route for controlling molecular alignment during layer growth, and ultimately to increase the optical outcoupling in organic light‐emitting diodes.Pt(II) complex orientation is controlled by modifying the molecular structure and structural templating. Molecules with modified structures show ≈20% increased fraction of horizontally aligned transition dipole moments (TDMs) when doped into a host. Alternatively, a highly ordered molecular template drives the alignment of a subsequently deposited polycrystalline emissive layer, showing a 60% increase in horizontally aligned TDMs versus without template.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/151333/1/adma201900921.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/151333/2/adma201900921_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/151333/3/adma201900921-sup-0001-S1.pd

Overview of the Kepler Science Processing Pipeline

The Kepler Mission Science Operations Center (SOC) performs several critical functions including managing the ~156,000 target stars, associated target tables, science data compression tables and parameters, as well as processing the raw photometric data downlinked from the spacecraft each month. The raw data are first calibrated at the pixel level to correct for bias, smear induced by a shutterless readout, and other detector and electronic effects. A background sky flux is estimated from ~4500 pixels on each of the 84 CCD readout channels, and simple aperture photometry is performed on an optimal aperture for each star. Ancillary engineering data and diagnostic information extracted from the science data are used to remove systematic errors in the flux time series that are correlated with these data prior to searching for signatures of transiting planets with a wavelet-based, adaptive matched filter. Stars with signatures exceeding 7.1 sigma are subjected to a suite of statistical tests including an examination of each star's centroid motion to reject false positives caused by background eclipsing binaries. Physical parameters for each planetary candidate are fitted to the transit signature, and signatures of additional transiting planets are sought in the residual light curve. The pipeline is operational, finding planetary signatures and providing robust eliminations of false positives.Comment: 8 pages, 3 figure

Semi-Weekly Monitoring of the Performance and Attitude of Kepler Using a Sparse Set of Targets

The Kepler spacecraft is in a heliocentric Earth-trailing orbit, continuously observing ~160,000 select stars over ~115 square degrees of sky using its photometer containing 42 highly sensitive CCDs. The science data from these stars, consisting of ~6 million pixels at 29.4-minute intervals, is downlinked only every ~30 days. Additional low-rate Xband communications contacts are conducted with the spacecraft twice a week to downlink a small subset of the science data. This paper describes how we assess and monitor the performance of the photometer and the pointing stability of the spacecraft using such a sparse data set

Planetary Candidates Observed by Kepler. VII. The First Fully Uniform Catalog Based on The Entire 48 Month Dataset (Q1-Q17 DR24)

We present the seventh Kepler planet candidate catalog, which is the first to be based on the entire, uniformly processed, 48 month Kepler dataset. This is the first fully automated catalog, employing robotic vetting procedures to uniformly evaluate every periodic signal detected by the Q1-Q17 Data Release 24 (DR24) Kepler pipeline. While we prioritize uniform vetting over the absolute correctness of individual objects, we find that our robotic vetting is overall comparable to, and in most cases is superior to, the human vetting procedures employed by past catalogs. This catalog is the first to utilize artificial transit injection to evaluate the performance of our vetting procedures and quantify potential biases, which are essential for accurate computation of planetary occurrence rates. With respect to the cumulative Kepler Object of Interest (KOI) catalog, we designate 1,478 new KOIs, of which 402 are dispositioned as planet candidates (PCs). Also, 237 KOIs dispositioned as false positives (FPs) in previous Kepler catalogs have their disposition changed to PC and 118 PCs have their disposition changed to FP. This brings the total number of known KOIs to 8,826 and PCs to 4,696. We compare the Q1-Q17 DR24 KOI catalog to previous KOI catalogs, as well as ancillary Kepler catalogs, finding good agreement between them. We highlight new PCs that are both potentially rocky and potentially in the habitable zone of their host stars, many of which orbit solar-type stars. This work represents significant progress in accurately determining the fraction of Earth-size planets in the habitable zone of Sun-like stars. The full catalog is publicly available at the NASA Exoplanet Archive.Comment: Accepted to the Astrophysical Journal Supplement Series. 30 pages, 9 figures, 7 tables. We make the DR24 robovetter decision code publicly available at http://github.com/JeffLCoughlin/robovetter, with input and output examples provided using the same data as contained in the full paper's table