Aqueye+: a new ultrafast single photon counter for optical high time resolution astrophysics

Aqueye+ is a new ultrafast optical single photon counter, based on single photon avalanche photodiodes (SPAD) and a 4-fold split-pupil concept. It is a completely revisited version of its predecessor, Aqueye, successfully mounted at the 182 cm Copernicus telescope in Asiago. Here we will present the new technological features implemented on Aqueye+, namely a state of the art timing system, a dedicated and optimized optical train, a high sensitivity and high frame rate field camera and remote control, which will give Aqueye plus much superior performances with respect to its predecessor, unparalleled by any other existing fast photometer. The instrument will host also an optical vorticity module to achieve high performance astronomical coronography and a real time acquisition of atmospheric seeing unit. The present paper describes the instrument and its first performances.Comment: Proceedings of the SPIE, Volume 9504, id. 95040C 14 pp. (2015

Metal Abundances of Red Clump Stars in Open Clusters: I. NGC 6819

We present an analysis of high dispersion spectra (R~40000) of three red clump stars in the old open cluster NGC 6819. The spectra were obtained with SARG, the high dispersion spectrograph of the Telescopio Nazionale Galileo. The spectra were analyzed using both equivalent widths measured with an automatic procedure, and comparisons with synthetic spectra. NGC 6819 is found to be slightly metal-rich ([Fe/H]= +0.09 +/-0.03, internal error); there are no previous high resolution studies to compare with. Most element-to-element abundance ratios are close to solar; we find a slight excess of Si, and a significant Na overabundance. Our spectra can also be used to derive the interstellar reddening towards the cluster, by comparing the observed colours with those expected from line excitation: we derive E(B-V)=0.14 +/-0.04, in agreement with the most recent estimate for this cluster.Comment: 30 pages, 4 encapsulated figures, uses aastex, AJ in pres

Discovery of a bipolar and highly variable mass outflow from the symbiotic binary StHa 190

A highly and rapidly variable bipolar mass outflow from StHa 190 has been discovered, the first time in a yellow symbiotic star. Permitted emission lines are flanked by symmetrical jet features and multi-component P-Cyg profiles, with velocities up to 300 km/sec. Given the high orbital inclination of the binary, if the jets leave the system nearly perpendicular to the orbital plane, the de-projected velocity equals or exceeds the escape velocity (1000 km/sec). StHa190 looks quite peculiar in many other respects: the hot component is an O-type sub-dwarf without an accretion disk or a veiling nebular continuum and the cool component is a G7 III star rotating at a spectacular 105 km/sec unseen by a large margin in field G giants.Comment: Letter to the Editor, Astron.Astrophys, in pres

SPHERE: the exoplanet imager for the Very Large Telescope

Observations of circumstellar environments to look for the direct signal of exoplanets and the scattered light from disks has significant instrumental implications. In the past 15 years, major developments in adaptive optics, coronagraphy, optical manufacturing, wavefront sensing and data processing, together with a consistent global system analysis have enabled a new generation of high-contrast imagers and spectrographs on large ground-based telescopes with much better performance. One of the most productive is the Spectro-Polarimetic High contrast imager for Exoplanets REsearch (SPHERE) designed and built for the ESO Very Large Telescope (VLT) in Chile. SPHERE includes an extreme adaptive optics system, a highly stable common path interface, several types of coronagraphs and three science instruments. Two of them, the Integral Field Spectrograph (IFS) and the Infra-Red Dual-band Imager and Spectrograph (IRDIS), are designed to efficiently cover the near-infrared (NIR) range in a single observation for efficient young planet search. The third one, ZIMPOL, is designed for visible (VIR) polarimetric observation to look for the reflected light of exoplanets and the light scattered by debris disks. This suite of three science instruments enables to study circumstellar environments at unprecedented angular resolution both in the visible and the near-infrared. In this work, we present the complete instrument and its on-sky performance after 4 years of operations at the VLT.Comment: Final version accepted for publication in A&

Upper limits for mass and radius of objects around Proxima Cen from SPHERE/VLT

The recent discovery of an earth-like planet around Proxima Centauri has drawn much attention to this star and its environment. We performed a series of observations of Proxima Centauri using Spectro-Polarimetric High-contrast Exoplanet REsearch (SPHERE), the planet-finder instrument installed at the European Southern Observatory (ESO) Very Large Telescope (VLT) UT3, using its near-infrared modules, InfraRed Dual-band Imager and Spectrograph (IRDIS) and IFS. No planet was detected directly, but we set upper limits on the mass up to 7 au by exploiting the AMES-COND models. Our IFS observations reveal that no planet more massive than ∼6–7 MJup can be present within 1 au. The dual-band imaging camera IRDIS also enables us to probe larger separations than other techniques such as radial velocity or astrometry. We obtained mass limits of the order of 4 MJup at separations of 2 au or larger, representing the most stringent mass limits at separations larger than 5 au available at the moment. We also made an attempt to estimate the radius of possible planets around Proxima using the reflected light. Since the residual noise for the observations is dominated by photon noise and thermal background, longer exposures in good observing conditions could improve the achievable contrast limit further.DM, AZ, RG, RUC, SD and ES acknowledge support from the ‘Progetti Premiali’ funding scheme of MIUR. We acknowledge support from the French ANR through the GUEPARD project grant ANR10-BLANC0504-01. QK acknowledges support from the EU through ERC grant number 279973. JH is supported by the GIPSE grant ANR-14-CE33-0018. HA acknowledges financial support by FONDECYT, grant 3150643, and support from the Millennium Science Initiative (Chilean Ministry of Economy) through grant RC130007. SPHERE was funded by ESO, with additional contributions from CNRS (France), MPIA (Germany), INAF (Italy), FINES (Switzerland) and NOVA (Netherlands). SPHERE also received funding from the European Commission Sixth and Seventh Framework Programmes as part of the Optical Infrared Coordination Network for Astronomy (OPTICON) under grant number RII3-Ct-2004-001566 for FP6 (2004-2008), grant number 226604 for FP7 (2009-2012) and grant number 312430 for FP7 (2013-2016). Part of this has been carried out within the frame of the National Centre for Competence in Research Planets supported by the Swiss National Science Foundation. H.M.S. and M.R.M. acknowledge financial support from the SNSF

Upper limits for mass and radius of objects around Proxima Cen from SPHERE/VLT

The recent discovery of an earth-like planet around Proxima Centauri has drawn much attention to this star and its environment. We performed a series of observations of Proxima Centauri using Spectro-Polarimetric High-contrast Exoplanet REsearch (SPHERE), the planet-finder instrument installed at the European Southern Observatory (ESO) Very Large Telescope (VLT) UT3, using its near-infrared modules, InfraRed Dual-band Imager and Spectrograph (IRDIS) and IFS. No planet was detected directly, but we set upper limits on the mass up to 7 au by exploiting the AMES-COND models. Our IFS observations reveal that no planet more massive than ∼6–7 MJup can be present within 1 au. The dual-band imaging camera IRDIS also enables us to probe larger separations than other techniques such as radial velocity or astrometry. We obtained mass limits of the order of 4 MJup at separations of 2 au or larger, representing the most stringent mass limits at separations larger than 5 au available at the moment. We also made an attempt to estimate the radius of possible planets around Proxima using the reflected light. Since the residual noise for the observations is dominated by photon noise and thermal background, longer exposures in good observing conditions could improve the achievable contrast limit further.DM, AZ, RG, RUC, SD and ES acknowledge support from the ‘Progetti Premiali’ funding scheme of MIUR. We acknowledge support from the French ANR through the GUEPARD project grant ANR10-BLANC0504-01. QK acknowledges support from the EU through ERC grant number 279973. JH is supported by the GIPSE grant ANR-14-CE33-0018. HA acknowledges financial support by FONDECYT, grant 3150643, and support from the Millennium Science Initiative (Chilean Ministry of Economy) through grant RC130007. SPHERE was funded by ESO, with additional contributions from CNRS (France), MPIA (Germany), INAF (Italy), FINES (Switzerland) and NOVA (Netherlands). SPHERE also received funding from the European Commission Sixth and Seventh Framework Programmes as part of the Optical Infrared Coordination Network for Astronomy (OPTICON) under grant number RII3-Ct-2004-001566 for FP6 (2004-2008), grant number 226604 for FP7 (2009-2012) and grant number 312430 for FP7 (2013-2016). Part of this has been carried out within the frame of the National Centre for Competence in Research Planets supported by the Swiss National Science Foundation. H.M.S. and M.R.M. acknowledge financial support from the SNSF

VizieR Online Data Catalog: HD 284149 SPHERE/IFS spectrum (Bonavita+, 2017)

HD 284149 was observed with SPHERE in IRDIFS mode on 2015-10-25 and with IRDIFS_EXT mode on 2015-11-27 as part of the SHINE (SpHere INfrared survey for Exoplanet) GTO campaign. (1 data file)

Intensity interferometry with Aqueye+ and Iqueye in Asiago

Since a number of years our group is engaged in the design, construction and operation of instruments with very high time resolution in the optical band for applications to Quantum Astronomy and more conventional Astrophysics. Two instruments were built to perform photon counting with sub-nanosecond temporal accuracy. The first of the two, Aqueye+, is regularly mounted at the 1.8 m Copernicus telescope in Asiago, while the second one, Iqueye, was mounted at the ESO New Technology Telescope in Chile, and at the William Herschel Telescope and Telescopio Nazionale Galileo on the Roque (La Palma, Canary Islands). Both instruments deliver extraordinarily accurate results in optical pulsar timing. Recently, Iqueye was moved to Asiago to be mounted at the 1.2 m Galileo telescope to attempt, for the first time ever, experiments of optical intensity interferometry (à la Hanbury Brown and Twiss) on a baseline of a few kilometers, together with the Copernicus telescope. This application was one of the original goals for the development of our instrumentation. To carry out these measurements, we are experimenting a new way of coupling the instruments to the telescopes, by means of moderate-Aperture, low-optical-Attenuation multi-mode optical fibers with a double-clad design. Fibers are housed in dedicated optical interfaces attached to the focus of another instrument of the 1.8 m telescope (Aqueye+) or to the Nasmyth focus of the 1.2 m telescope (Iqueye). This soft-mount solution has the advantage to facilitate the mounting of the photon counters, to keep them under controlled temperature and humidity conditions (reducing potential systematics related to varying ambient conditions), and to mitigate scheduling requirements. Here we will describe the first successful implementation of the Asiago intensity interferometer and future plans for improving it

A tunable integrated system to simulate colder stellar radiation

In the last years, a lot of extrasolar planets have been discovered in any direction of the Galaxy. More interesting, some of them have been found in the habitable zone of their host stars. A large diversity of spectral type, from early types (A) to colder ones (M), is covered by the planetary system host stars. A lot of efforts are done in order to find habitable planets around M stars and indeed some habitable super earths were found. In this framework, a€Atmosphere in a Test Tubea€, a project started at Astronomical observatory of Padua, simulates planetary environmental condition in order to understand how and how much the behavior of photosynthetic bacteria in different planetary/star scenarios can modify the planet atmosphere. The particular case of an habitable planet orbiting a M dwarf star is under study for the time being. The irradiation of an M star, due to its lower surface temperature is very different in quality and quantity by the irradiation of a star like our Sun. We would like to describe the study of feasibility of a new kind of tunable led stellarlight simulator capable to recreate the radiation spectrum of M type stars (but with the potential to be expanded even to F, G, K star spectra types) incident on the planet. The radiation source is a multiple LED matrix cooled by means of air fan technology. In order to endow it with modularity this device will be composed by a mosaic of circuit boards arranged in a pie-chart shape, on the surface of which will be welded the LEDs. This concept is a smart way in order to replace blown out pieces instead of changing the entire platform as well as implement the device with new modules suitable to reproduce other type of stars. The device can be driven by a PC to raise or lower the intensity of both each LED and the lamp, in order to simulate as close as possible a portion of the star spectrum. The wavelength intervals overlap the limits of photosynthetic pigment absorption range (280-850 nm), while the range of the radiation source will be between 365 nm and 940 nm. The reason why we chose a higher outer limit is that M stars have the emission peak at about 1000 nm and we want to study the effects of low-light radiation on bacterial vitality. The innovative concept behind this radiative source is the use of the LED components to simulate the main stellar absorption lines and to make this a dynamic-light. Last but not least the use of LED is crucial to keep the device compact and handy. This device could help us to better understand the link between radiation and NIR-photosynthesis and could find applications in the field of photobioreactors as a test bench for the choice of the wavelength to be used in order to maximize the production rate. Other fields of application are the microscopy light sources field and the yeasts growth sector