124 research outputs found

    Characterization of a Poly-4-Vinylpyridine-Supported CuPd Bimetallic Catalyst for Sonogashira Coupling Reactions

    Get PDF
    CuPd bimetallic solvated metal atoms (SMA) synthesized by metal vapor synthesis (MVS) technique and supported on poly-4-vinylpyridine (PVPy) resin, showed significantly higher catalytic activity in Sonogashira-type carbon–carbon coupling reactions than the corresponding monometallic Cu and Pd systems as well as their physical mixture. The analysis of the bimetallic catalyst combining transmission electron microscopy techniques and X-ray absorption fine structure (XAFS) spectroscopy revealed the presence of small Pd nanoparticles (dm=2.5 nm) while the analysis of the X-ray absorption data, at the Cu K-edge suggests the formation of thin and incomplete Cu oxide layers around the Pd-rich cores

    Aminopropyl-silica-supported Cu nanoparticles: An efficient catalyst for continuous-flow Huisgen azide-alkyne cycloaddition (CuAAC)

    Get PDF
    Cu nanoparticles prepared by metal vapor synthesis (MVS) were immobilized on 3-aminopropyl-functionalized silica at room temperature. HRTEM analysis of the catalyst showed that the copper nanoparticles are present with mean diameters limited in the range 1.0-4.5 nm. TPR analysis was performed in order to study the oxidation state of the supported copper nanoparticles. The supported catalyst was used both in batch and in a packed-bed reactor for continuous-flow CuAAC reaction. The activation of the copper catalyst by reduction using phenyl hydrazine in continuous-flow conditions was demonstrated. Along with the high catalytic activity (productivity up to 1689 mol/mol), the catalyst can be used several times with negligible Cu leaching in the product (<9 ppm), less than allowed Cu contaminant in pharmaceuticals. The applicability of packed-bed flow reactor was showed by sequentially converting different substrates in their corresponding products using same column

    Photoelectrochemical behavior of electrophoretically deposited hematite thin films modified with ti(IV)

    Get PDF
    : Doping hematite with different elements is a common strategy to improve the electrocatalytic activity towards the water oxidation reaction, although the exact effect of these external agents is not yet clearly understood. Using a feasible electrophoretic procedure, we prepared modified hematite films by introducing in the deposition solution Ti(IV) butoxide. Photoelectrochemical performances of all the modified electrodes were superior to the unmodified one, with a 4-fold increase in the photocurrent at 0.65 V vs. SCE in 0.1 M NaOH (pH 13.3) for the 5% Ti-modified electrode, which was the best performing electrode. Subsequent functionalization with an iron-based catalyst led, at the same potential, to a photocurrent of ca. 1.5 mA?cm-2 , one of the highest achieved with materials based on solution processing in the absence of precious elements. AFM, XPS, TEM and XANES analyses revealed the formation of different Ti(IV) oxide phases on the hematite surface, that can reduce surface state recombination and enhance hole injection through local surface field effects, as confirmed by electrochemical impedance analysis

    Ultrafine palladium nanoparticles immobilized into poly(4-vinylpyridine)-based porous monolith for continuous-flow Mizoroki-Heck reaction

    Get PDF
    Ultrafine Pd nanoparticles (dm = 2.3 nm), obtained by metal vapor synthesis technique, were immobilized into a poly(4-vinylpyridine)-based porous monolith by means of a new synthetic approach. The synthesis involves stabilization of Pd nanoparticles with 4-vinylpyridine ligand and their subsequent immobilization into the monolith by radical co-polymerization of the resulting metal-embedding monomer with ethylene glycol dimethacrylate in presence of porogenic agents (i.e. DMF and PEG-400) inside stainless-steel columns (HPLC type). The hybrid monolithic reactors containing highly dispersed Pd nanoparticles were effectively used as catalyst for Mizoroki-Heck cross-coupling reactions carried out under continuous-flow conditions. The devices showed long life-time (>65 h) and very low Pd leaching (<2 ppm)

    Gold nanoparticles onto cerium oxycarbonate as highly efficient catalyst for aerobic allyl alcohol oxidation

    Get PDF
    Abstract Au nanoparticles, generated by the metal vapor synthesis technique, were supported onto cerium oxycarbonate monohydrate (Ce2O(CO3)2·H2O) giving Au@Ce2O(CO3)2·H2O. The obtained heterogeneous catalyst was used in the aerobic allyl alcohol oxidation reaction performed in toluene, showing a notably higher catalytic substrate conversion and isomerization activity compared to Au onto ceria, which is the reference catalyst for this type of catalysis. Results originating from catalytic recycling experiments and PXRD, HRTEM and XPS measurements carried out on recovered Au@Ce2O(CO3)2·H2O, confirmed the stability of the catalyst under aerobic oxidation reaction conditions and hence its recyclability, without the need of a regeneration step

    Bio adipic acid production from sodium muconate and muconic acid: a comparison of two systems

    Get PDF
    sodium muconate and trans,trans‐muconic acid were heterogeneously hydrogenated to adipic acid, a strategic intermediate for the industry of polyamides and high performance polymers. Hydrogen pressure, metal to substrate ratio, substrate concentration and reaction temperature were varied to study the effect of these parameters on the reaction products. Commercial Pd/AC 5 % was used as catalyst and characterized by TEM, BET and XPS analyses. The results revealed that temperature is the parameter which mainly affect the reaction. Moreover, hydrogenation of trans,trans‐muconic acid is faster than sodium muconate reduction. Full conversion and full yield toward adipic acid was obtained using trans,trans‐muconic acid as substrate after 60 min at the following operating conditions: temperature=70 °C, metal/substrate=1/200 (molPd/molsub), trans,trans‐muconic acid concentration=1.42E‐02M and hydrogen pressure=1 bar. In all reactions (2E)hexenedioic acid was detected as main intermediate

    Palladium nanoparticles supported on Smopex®metal scavengers ascatalyst for carbonylative Sonogashira reactions: Synthesis of α,β-alkynyl ketones

    Get PDF
    Palladium nanoparticles supported on two Smopex®commercial metal scavengers (1% w/w) have beentested in the carbonylative Sonogashira reactions of aryl iodides with phenylacetylene. Their catalyticactivity has been compared with those of more common catalysts (Pd/C, Pd/-Al2O3). Pd/Smopex®-234resulted especially effective in the synthesis of alkynyl ketones even working with a low amount ofpalladium (0.2–0.5 mol%). Preliminary heterogeneity tests (i.e. hot filtration test, Pd leaching and recycleof the catalyst) have been performed in order to evaluate the catalytic behaviour of this system. Theobtained results seem to indicate that Pd/Smopex®-234 could act as a truly heterogeneous catalyst

    Furfural Hydrogenation on Modified Niobia

    Full text link
    [EN] In this study, niobia-based materials have been used as supports for Pt nanoparticles and used in the hydrogenation of furfural. The incorporation of dopants (W6+ and Ti4+) in the Nb2O5 structure induced modifications in the surface acidity of the support; in particular, the addition of W6+ increased the amount of Lewis acid sites, while the addition of Ti4+ decreased the number of Lewis acid sites. As a result, the catalytic activity towards the hydrogenation of furfural was affected; high surface acidity resulted in high catalytic activity. The selectivity of the reaction changed with the support acidity as well, with higher amount of furfuryl alcohol produced decreasing the Lewis acid sites.Jouve, A.; Cattaneo, S.; Delgado-Muñoz, D.; Scotti, N.; Evangelisti, C.; López Nieto, JM.; Prati, L. (2019). Furfural Hydrogenation on Modified Niobia. Applied Sciences. 9(11):1-14. https://doi.org/10.3390/app9112287S114911Binder, J. B., & Raines, R. T. (2009). Simple Chemical Transformation of Lignocellulosic Biomass into Furans for Fuels and Chemicals. Journal of the American Chemical Society, 131(5), 1979-1985. doi:10.1021/ja808537jCao, Q., Guo, X., Guan, J., Mu, X., & Zhang, D. (2011). A process for efficient conversion of fructose into 5-hydroxymethylfurfural in ammonium salts. Applied Catalysis A: General, 403(1-2), 98-103. doi:10.1016/j.apcata.2011.06.018Cattaneo, S., Naslhajian, H., Somodi, F., Evangelisti, C., Villa, A., & Prati, L. (2018). Ruthenium on Carbonaceous Materials for the Selective Hydrogenation of HMF. Molecules, 23(8), 2007. doi:10.3390/molecules23082007Qi, X., Watanabe, M., Aida, T. M., & Smith, R. L. (2012). Synergistic conversion of glucose into 5-hydroxymethylfurfural in ionic liquid–water mixtures. Bioresource Technology, 109, 224-228. doi:10.1016/j.biortech.2012.01.034Ormsby, R., Kastner, J. R., & Miller, J. (2012). Hemicellulose hydrolysis using solid acid catalysts generated from biochar. Catalysis Today, 190(1), 89-97. doi:10.1016/j.cattod.2012.02.050Lavarack, B. P., Griffin, G. J., & Rodman, D. (2002). The acid hydrolysis of sugarcane bagasse hemicellulose to produce xylose, arabinose, glucose and other products. Biomass and Bioenergy, 23(5), 367-380. doi:10.1016/s0961-9534(02)00066-1Carà, P. D., Pagliaro, M., Elmekawy, A., Brown, D. R., Verschuren, P., Shiju, N. R., & Rothenberg, G. (2013). Hemicellulose hydrolysis catalysed by solid acids. Catalysis Science & Technology, 3(8), 2057. doi:10.1039/c3cy20838aO’Neill, R., Ahmad, M. N., Vanoye, L., & Aiouache, F. (2009). Kinetics of Aqueous Phase Dehydration of Xylose into Furfural Catalyzed by ZSM-5 Zeolite. Industrial & Engineering Chemistry Research, 48(9), 4300-4306. doi:10.1021/ie801599kWeingarten, R., Cho, J., Conner, Jr., W. C., & Huber, G. W. (2010). Kinetics of furfural production by dehydration of xylose in a biphasic reactor with microwave heating. Green Chemistry, 12(8), 1423. doi:10.1039/c003459bGómez Bernal, H., Bernazzani, L., & Raspolli Galletti, A. M. (2014). Furfural from corn stover hemicelluloses. A mineral acid-free approach. Green Chem., 16(8), 3734-3740. doi:10.1039/c4gc00450gDelbecq, F., Wang, Y., Muralidhara, A., El Ouardi, K., Marlair, G., & Len, C. (2018). Hydrolysis of Hemicellulose and Derivatives—A Review of Recent Advances in the Production of Furfural. Frontiers in Chemistry, 6. doi:10.3389/fchem.2018.00146Mariscal, R., Maireles-Torres, P., Ojeda, M., Sádaba, I., & López Granados, M. (2016). Furfural: a renewable and versatile platform molecule for the synthesis of chemicals and fuels. Energy & Environmental Science, 9(4), 1144-1189. doi:10.1039/c5ee02666kYan, K., Wu, G., Lafleur, T., & Jarvis, C. (2014). Production, properties and catalytic hydrogenation of furfural to fuel additives and value-added chemicals. Renewable and Sustainable Energy Reviews, 38, 663-676. doi:10.1016/j.rser.2014.07.003Bui, L., Luo, H., Gunther, W. R., & Román-Leshkov, Y. (2013). Domino Reaction Catalyzed by Zeolites with Brønsted and Lewis Acid Sites for the Production of γ-Valerolactone from Furfural. Angewandte Chemie International Edition, 52(31), 8022-8025. doi:10.1002/anie.201302575Taylor, M. J., Durndell, L. J., Isaacs, M. A., Parlett, C. M. A., Wilson, K., Lee, A. F., & Kyriakou, G. (2016). Highly selective hydrogenation of furfural over supported Pt nanoparticles under mild conditions. Applied Catalysis B: Environmental, 180, 580-585. doi:10.1016/j.apcatb.2015.07.006Schäfer, H., Gruehn, R., & Schulte, F. (1966). The Modifications of Niobium Pentoxide. Angewandte Chemie International Edition in English, 5(1), 40-52. doi:10.1002/anie.196600401Allpress, J. G., Sanders, J. V., & Wadsley, A. D. (1968). Electron microscopy of high-temperature Nb2O5 and related phases. Physica Status Solidi (b), 25(2), 541-550. doi:10.1002/pssb.19680250206Jehng, J.-M., & Wachs, I. E. (1990). The molecular structures and reactivity of supported niobium oxide catalysts. Catalysis Today, 8(1), 37-55. doi:10.1016/0920-5861(90)87006-oJehng, J. M., & Wachs, I. E. (1991). Molecular structures of supported niobium oxide catalysts under in situ conditions. The Journal of Physical Chemistry, 95(19), 7373-7379. doi:10.1021/j100172a049Carniti, P., Gervasini, A., & Marzo, M. (2010). Silica–niobia oxides as viable acid catalysts in water: Effective vs. intrinsic acidity. Catalysis Today, 152(1-4), 42-47. doi:10.1016/j.cattod.2009.07.111Gupta, N. K., Fukuoka, A., & Nakajima, K. (2017). Amorphous Nb2O5 as a Selective and Reusable Catalyst for Furfural Production from Xylose in Biphasic Water and Toluene. ACS Catalysis, 7(4), 2430-2436. doi:10.1021/acscatal.6b03682Marzo, M., Gervasini, A., & Carniti, P. (2012). Improving stability of Nb2O5 catalyst in fructose dehydration reaction in water solvent by ion-doping. Catalysis Today, 192(1), 89-95. doi:10.1016/j.cattod.2011.12.014CARNITI, P., GERVASINI, A., BIELLA, S., & AUROUX, A. (2006). Niobic acid and niobium phosphate as highly acidic viable catalysts in aqueous medium: Fructose dehydration reaction. Catalysis Today, 118(3-4), 373-378. doi:10.1016/j.cattod.2006.07.024Omata, K., Izumi, S., Murayama, T., & Ueda, W. (2013). Hydrothermal synthesis of W–Nb complex metal oxides and their application to catalytic dehydration of glycerol to acrolein. Catalysis Today, 201, 7-11. doi:10.1016/j.cattod.2012.06.004García-Sancho, C., Cecilia, J. A., Moreno-Ruiz, A., Mérida-Robles, J. M., Santamaría-González, J., Moreno-Tost, R., & Maireles-Torres, P. (2015). Influence of the niobium supported species on the catalytic dehydration of glycerol to acrolein. Applied Catalysis B: Environmental, 179, 139-149. doi:10.1016/j.apcatb.2015.05.014Silva, Â., Wilson, K., Lee, A. F., dos Santos, V. C., Cons Bacilla, A. C., Mantovani, K. M., & Nakagaki, S. (2017). Nb2O5/SBA-15 catalyzed propanoic acid esterification. Applied Catalysis B: Environmental, 205, 498-504. doi:10.1016/j.apcatb.2016.12.066Noronha, F. ., Aranda, D. A. ., Ordine, A. ., & Schmal, M. (2000). The promoting effect of Nb2O5 addition to Pd/Al2O3 catalysts on propane oxidation. Catalysis Today, 57(3-4), 275-282. doi:10.1016/s0920-5861(99)00337-5Molina, M. J. C., Granados, M. L., Gervasini, A., & Carniti, P. (2015). Exploitment of niobium oxide effective acidity for xylose dehydration to furfural. Catalysis Today, 254, 90-98. doi:10.1016/j.cattod.2015.01.018Stošić, D., Bennici, S., Rakić, V., & Auroux, A. (2012). CeO2–Nb2O5 mixed oxide catalysts: Preparation, characterization and catalytic activity in fructose dehydration reaction. Catalysis Today, 192(1), 160-168. doi:10.1016/j.cattod.2011.10.040Stošić, D., Bennici, S., Pavlović, V., Rakić, V., & Auroux, A. (2014). Tuning the acidity of niobia: Characterization and catalytic activity of Nb2O5–MeO2 (Me = Ti, Zr, Ce) mesoporous mixed oxides. Materials Chemistry and Physics, 146(3), 337-345. doi:10.1016/j.matchemphys.2014.03.033Li, H., Fang, Z., Smith, R. L., & Yang, S. (2016). Efficient valorization of biomass to biofuels with bifunctional solid catalytic materials. Progress in Energy and Combustion Science, 55, 98-194. doi:10.1016/j.pecs.2016.04.004Evangelisti, C., Aronica, L. A., Botavina, M., Martra, G., Battocchio, C., & Polzonetti, G. (2013). Chemoselective hydrogenation of halonitroaromatics over γ-Fe2O3-supported platinum nanoparticles: The role of the support on their catalytic activity and selectivity. Journal of Molecular Catalysis A: Chemical, 366, 288-293. doi:10.1016/j.molcata.2012.10.007Emeis, C. A. (1993). Determination of Integrated Molar Extinction Coefficients for Infrared Absorption Bands of Pyridine Adsorbed on Solid Acid Catalysts. Journal of Catalysis, 141(2), 347-354. doi:10.1006/jcat.1993.1145Oberhauser, W., Evangelisti, C., Jumde, R. P., Psaro, R., Vizza, F., Bevilacqua, M., … Serp, P. (2015). Platinum on carbonaceous supports for glycerol hydrogenolysis: Support effect. Journal of Catalysis, 325, 111-117. doi:10.1016/j.jcat.2015.03.003Oberhauser, W., Evangelisti, C., Tiozzo, C., Vizza, F., & Psaro, R. (2016). Lactic Acid from Glycerol by Ethylene-Stabilized Platinum-Nanoparticles. ACS Catalysis, 6(3), 1671-1674. doi:10.1021/acscatal.5b02914La Salvia, N., Delgado, D., Ruiz-Rodríguez, L., Nadji, L., Massó, A., & Nieto, J. M. L. (2017). V- and Nb-containing tungsten bronzes catalysts for the aerobic transformation of ethanol and glycerol. Bulk and supported materials. Catalysis Today, 296, 2-9. doi:10.1016/j.cattod.2017.04.009Fernández-Arroyo, A., Delgado, D., Domine, M. E., & López-Nieto, J. M. (2017). Upgrading of oxygenated compounds present in aqueous biomass-derived feedstocks over NbOx-based catalysts. Catalysis Science & Technology, 7(23), 5495-5499. doi:10.1039/c7cy00916jShannon, R. D. (1976). Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides. Acta Crystallographica Section A, 32(5), 751-767. doi:10.1107/s0567739476001551Botella, P., Solsona, B., López Nieto, J. M., Concepción, P., Jordá, J. L., & Doménech-Carbó, M. T. (2010). Mo–W-containing tetragonal tungsten bronzes through isomorphic substitution of molybdenum by tungsten. Catalysis Today, 158(1-2), 162-169. doi:10.1016/j.cattod.2010.05.024Jehng, J. M., & Wachs, I. E. (1991). Structural chemistry and Raman spectra of niobium oxides. Chemistry of Materials, 3(1), 100-107. doi:10.1021/cm00013a025Delgado, D., Fernández-Arroyo, A., Domine, M. E., García-González, E., & López Nieto, J. M. (2019). W–Nb–O oxides with tunable acid properties as efficient catalysts for the transformation of biomass-derived oxygenates in aqueous systems. Catalysis Science & Technology, 9(12), 3126-3136. doi:10.1039/c9cy00367cScotti, N., Dangate, M., Gervasini, A., Evangelisti, C., Ravasio, N., & Zaccheria, F. (2014). Unraveling the Role of Low Coordination Sites in a Cu Metal Nanoparticle: A Step toward the Selective Synthesis of Second Generation Biofuels. ACS Catalysis, 4(8), 2818-2826. doi:10.1021/cs500581aCrépeau, G., Montouillout, V., Vimont, A., Mariey, L., Cseri, T., & Maugé, F. (2006). Nature, Structure and Strength of the Acidic Sites of Amorphous Silica Alumina:  An IR and NMR Study. The Journal of Physical Chemistry B, 110(31), 15172-15185. doi:10.1021/jp062252dRavindra Reddy, C., Nagendrappa, G., & Jai Prakash, B. S. (2007). Surface acidity study of M+-montmorillonite clay catalysts by FT-IR spectroscopy: Correlation with esterification activity. Catalysis Communications, 8(3), 241-246. doi:10.1016/j.catcom.2006.06.023Gervasini, A., Carniti, P., Bossola, F., Imparato, C., Pernice, P., Clayden, N. J., & Aronne, A. (2018). New Nb-P-Si ternary oxide materials and their use in heterogeneous acid catalysis. Molecular Catalysis, 458, 280-286. doi:10.1016/j.mcat.2017.10.006Carniti, P., Gervasini, A., Bossola, F., & Dal Santo, V. (2016). Cooperative action of Brønsted and Lewis acid sites of niobium phosphate catalysts for cellobiose conversion in water. Applied Catalysis B: Environmental, 193, 93-102. doi:10.1016/j.apcatb.2016.04.01

    Discovering indium as hydrogen production booster for a Cu/SiO2 catalyst in steam reforming of methanol

    Get PDF
    Abstract We report on the use of In as an effective H2 production promoter in a Cu/SiO2 catalyst for the steam reforming of methanol. To date, In promotion has been limited to noble metals because of its tendency to "bury" other metals thus compromising the catalytic activity. Here, we prepared a silica-supported Cu-In catalyst via a urea-assisted co-precipitation method that showed a higher H2 productivity compared to the monometallic catalyst and a remarkable H2/CO2 molar ratio of almost 3 at 220 °C. Through XPS, XRPD and HRTEM-EDX along with H2- and CO-TPR, H2O-TPD, and N2O titrations, supported by computational modeling, we attributed such superior performances to an easier H2O activation due to improved electronic properties of the Cu phase, that is, its lower oxidation state via electron density transfer from the InOx buffer phase as a 1D "necklace" structures crucially mediating the interaction of small Cu nanoparticles (2.6 nm) and silica
    corecore