39 research outputs found
Master crossover functions for the one-component fluid "subclass"
Introducing three well-defined dimensionless numbers, we establish the link
between the scale dilatation method able to estimate master (i.e. unique)
singular behaviors of the one-component fluid "subclass" and the universal
crossover functions recently estimated [Garrabos and Bervillier, Phys. Rev. E
74, 021113 (2006)] from the bounded results of the massive renormalization
scheme applied to the..
Master singular behavior for the Sugden factor of the one-component fluids near their gas-liquid critical point
We present the master (i.e. unique) behavior of the squared capillary length
- so called the Sudgen factor-, as a function of the temperature-like field
along the critical isochore, asymptotically close to the gas-liquid critical
point of twenty (one component) fluids. This master behavior is obtained using
the scale dilatation of the relevant physical fields of the one-component
fluids. The scale dilatation introduces the fluid-dependent scale factors in a
manner analog with the linear relations between physical fields and scaling
fields needed by the renormalization theory applied to the Ising-like
universality class. The master behavior for the Sudgen factor satisfies
hyperscaling and can be asymptotically fitted by the leading terms of the
theoretical crossover functions for the correlation length and the
susceptibility in the homogeneous domain recently obtained from massive
renormalization in field theory. In the absence of corresponding estimation of
the theoretical crossover functions for the interfacial tension, we define the
range of the temperature-like field where the master leading power law can be
practically used to predict the singular behavior of the Sudgen factor in
conformity with the theoretical description provided by the massive
renormalization scheme within the extended asymptotic domain of the
one-component fluid "subclass"
Effect of support materials on supported platinum catalyst prepared using a supercritical fluid deposition technique and their catalytic performance for hydrogen-rich gas production from lignocellulosic biomass
PubMedID: 22939187A number of supported Pt catalysts have been prepared by supercritical carbon dioxide deposition technique using various supports. The reduction of Pt precursor to metal performed by heat treatment under nitrogen flow. The prepared catalysts were evaluated for gasification of wheat straw biomass hydrolysates and glucose solution for hydrogen-rich gas production. The activities of the catalysts were highly affected by distribution, amount and particle sizes of platinum on the support. In general carbon-based supported Pt catalysts exhibited better catalytic activity compared to other supports to be used. Compared to biomass hydrolysate feed, gasification of glucose always resulted in higher volume of gas mixture, however, hydrogen selectivity was decreased in all catalyst except multi-walled carbon nanotube. The deposition of Pt particles inner side of that support makes the large organic substrates inaccessible to reach and react with those metal particles. © 2012 Elsevier Ltd.RD07-HP-04, MAG 108M037Financial supports from Scientific and Technical Research Council of Turkey (TUBITAK) and International Centre for Hydrogen Energy Technologies (UNIDO-ICHET) are gratefully acknowledged (The project numbers: MAG 108M037 and RD07-HP-04, respectively). One of the authors (Burçak Kaya) was supported by TUBITAK and Bursa Technical University. Their contributions were greatly appreciated
Aerogels in drug delivery: From design to application
Aerogels are the lightest processed solid materials on Earth and with the largest empty volume fraction in their structure. Composition versatility, modularity, and feasibility of industrial scale manufacturing are behind the fast emergence of aerogels in the drug delivery field. Compared to other 3D materials, the high porosity (interconnected mesopores) and high specific surface area of aerogels may allow faster loading of small-molecule drugs, less constrained access to inner regions of the matrix, and more efficient interactions of the biological milieu with the polymer matrix. Processing in supercritical CO2 medium for both aerogel production (drying) and drug loading (impregnation) has remarkable advantages such as absence of an oxidizing environment, clean manufacture, and easiness for the scale-up under good manufacturing practices. The aerogel solid skeleton dictates the chemical affinity to the different drugs, which in turn determines the loading efficiency and the release pattern. Aerogels can be used to increase the solubility of BCS Class II and IV drugs because the drug can be deposited in amorphous state onto the large surface area of the skeleton, which facilitates a rapid contact with the body fluids, dissolution, and release. Conversely, tuning the aerogel structure by functionalization with drug-binding moieties or stimuli-responsive components, application of coatings and incorporation of drug-loaded aerogels into other matrices may enable site-specific, stimuli-responsive, or prolonged drug release. The present review deals with last decade advances in aerogels for drug delivery. An special focus is paid first on the loading efficiency of active ingredients and release kinetics under biorelevant conditions. Subsequent sections deal with aerogels intended to address specific therapeutic demands. In addition to oral delivery, the physical properties of the aerogels appear to be very advantageous for mucosal administration routes, such as pulmonary, nasal, or transdermal. A specific section devoted to recent achievements in gene therapy and theranostics is also included. In the last section, scale up strategies and life cycle assessment are comprehensively addressed
Recommended from our members
Catalyst and process development for synthesis gas conversion to isobutylene. Final report, September 1, 1990--January 31, 1994
This project was initiated because the supply of isobutylene had been identified as a limitation on the production of methyl-t-butyl ether, a gasoline additive. Prior research on isobutylene synthesis had been at low conversion (less than 5%) or extremely high pressures (greater than 300 bars). The purpose of this research was to optimize the synthesis of a zirconia based catalyst, determine process conditions for producing isobutylene at pressures less than 100 bars, develop kinetic and reactor models, and simulate the performance of fixed bed, trickle bed and slurry flow reactors. A catalyst, reactor models and optimum operating conditions have been developed for producing isobutylene from coal derived synthesis gas. The operating conditions are much less severe than the reaction conditions developed by the Germans during and prior to WWII. The low conversion, i.e. CO conversion less than 15%, have been perceived to be undesirable for a commercial process. However, the exothermic nature of the reaction and the ability to remove heat from the reactor could limit the extent of conversion for a fixed bed reactor. Long residence times for trickle or slurry (bubble column) reactors could result in high CO conversion at the expense of reduced selectivities to iso C{sub 4} compounds. Economic studies based on a preliminary design, and a specific location will be required to determine the commercial feasibility of the process
Determination of viscosity and density of fluids using frequency response of microcantilevers
We report on the simultaneous measurement of density and viscosity of nitrogen in gas and supercritical phases at 308.15 K and pressures up to 24 MPa. The density and viscosity were extracted from the measured frequency responses of an oscillated microcantilever immersed in N_2. To this end, a model of oscillatory motion of immersed cantilevers incorporating the effects of hydrodynamic forces was employed. Using argon as a reference fluid of known density and viscosity, cantilever calibration parameters were obtained from nonlinear regression of cantilever resonant frequencies and quality factors recorded in argon. Subsequently, these calibration parameters were used in the model equations to determine the density and viscosity of nitrogen at the given experimental pressure and temperature. In the studied pressure range, the root-mean-square deviations of the measured density and viscosity of nitrogen from the reference values obtained from NIST database were 2.5% and 5.2%, respectively
КОЛИЧЕСТВЕННОЕ СРАВНЕНИЕ ГЕОМЕТРИИ МОЛЕКУЛ ПОЛИМОРФНЫХ МОДИФИКАЦИЙ В МОНОКЛИДНОЙ И ТРИКЛИННОЙ СИНГОНИЯХ МЕДИ (II) БИ(1,1,1,3,5,5,6,6,6-НОНАФТОРОГЕКСАН-2,4-ДИИМИНАТА)
This paper presents the results of the complete X-ray structure analysis of Cu[CF3-C(NH)-CF-C(NH)-CF3]2 (CuDI6). Crystals were discovered in triclinic space group. Z = 2 (two independent molecules in asymmetric unit (β_1, β_2)). Final R-factor is 0.1002. A quantitative comparison of the geometry of molecules in two modifications of the triclinic space group with each other and with the geometry of the molecule in the monoclinic (α), which was already obtained earlier [1], is given.В данной работе приводятся результаты рентгено-структурного анализа Cu[CF3-C(NH)-CF-C(NH)-CF3]2 (CuDI6). Были обнаружены кристаллы в триклинной сингонии. Z=2 (две молекулы располагаются независимо в ассиметричной единице ( β 1 , β 2 )). Финальный R-фактор составляет 1,002. Приведено количественное сравнение геометрии молекул в двух модификациях триклинной сингонии между собой и с геометрией молекулы в моноклинной ( α ), которая уже была получена ранее [1]