2,270 research outputs found
The effect of an alginate carrier on bone formation in a hydroxyapatite scaffold.
This study investigated the osteoconductive properties of a porous hydroxyapatite (HA) scaffold manufactured using a novel technique similar to the bread-making process, alone and in combination with an alginate polysaccharide fiber gel (HA/APFG putty) and autologous bone marrow aspirate (BMA). The hypothesis was that the HA/APFG putty would be as osteoconductive as granular HA and that the presence of BMA would further enhance bone formation in an ovine femoral condyle critical defect model. Thirty-six defects were created and either (1) porous HA granules, (2) HA/APFG putty, or (3) HA/APFG putty + BMA were implanted. After retrieval at 6 and 12 weeks, image analysis techniques were used to quantify bone apposition rates, new bone area, bone-HA scaffold contact, and implant resorption. At 6 weeks postsurgery, significantly lower bone apposition rates were observed in the HA/APFG putty group when compared to the HA (p = 0.014) and HA/APFG putty + BMA (p = 0.014) groups. At 12 weeks, significantly increased amounts of new bone formation were measured within the HA scaffold (33.56 ± 3.53%) when compared to both the HA/APFG putty (16.69 ± 2.7%; p = 0.043) and the defects containing HA/APFG putty + BMA (19.31 ± 3.8%; p = 0.043). The use of an APFG gel as a carrier for injectable CaP bone substitute materials delayed bone formation in this model compared to HA granules alone which enhanced bone formation especially within the interconnected smaller pores. Our results also showed that the addition of autologous BMA did not further enhance its osteoconductive properties. Further study is required to optimize the degradation rate of this APFG binding agent before using as a directly injectable material for repair of bone defect. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2015
The revision partial knee classification system: understanding the causative pathology and magnitude of further surgery following partial knee arthroplasty.
AIMS: Joint registries classify all further arthroplasty procedures to a knee with an existing partial arthroplasty as revision surgery, regardless of the actual procedure performed. Relatively minor procedures, including bearing exchanges, are classified in the same way as major operations requiring augments and stems. A new classification system is proposed to acknowledge and describe the detail of these procedures, which has implications for risk, recovery, and health economics. METHODS: Classification categories were proposed by a surgical consensus group, then ranked by patients, according to perceived invasiveness and implications for recovery. In round one, 26 revision cases were classified by the consensus group. Results were tested for inter-rater reliability. In round two, four additional cases were added for clarity. Round three repeated the survey one month later, subject to inter- and intrarater reliability testing. In round four, five additional expert partial knee arthroplasty surgeons were asked to classify the 30 cases according to the proposed revision partial knee classification (RPKC) system. RESULTS: Four classes were proposed: PR1, where no bone-implant interfaces are affected; PR2, where surgery does not include conversion to total knee arthroplasty, for example, a second partial arthroplasty to a native compartment; PR3, when a standard primary total knee prosthesis is used; and PR4 when revision components are necessary. Round one resulted in 92% inter-rater agreement (Kendall's W 0.97; p < 0.005), rising to 93% in round two (Kendall's W 0.98; p < 0.001). Round three demonstrated 97% agreement (Kendall's W 0.98; p < 0.001), with high intra-rater reliability (interclass correlation coefficient (ICC) 0.99; 95% confidence interval 0.98 to 0.99). Round four resulted in 80% agreement (Kendall's W 0.92; p < 0.001). CONCLUSION: The RPKC system accounts for all procedures which may be appropriate following partial knee arthroplasty. It has been shown to be reliable, repeatable and pragmatic. The implications for patient care and health economics are discussed. Cite this article: Bone Jt Open 2021;2(8):638-645
How to prioritize patients and redesign care to safely resume planned surgery during the COVID-19 pandemic.
AIMS: Restarting planned surgery during the COVID-19 pandemic is a clinical and societal priority, but it is unknown whether it can be done safely and include high-risk or complex cases. We developed a Surgical Prioritization and Allocation Guide (SPAG). Here, we validate its effectiveness and safety in COVID-free sites. METHODS: A multidisciplinary surgical prioritization committee developed the SPAG, incorporating procedural urgency, shared decision-making, patient safety, and biopsychosocial factors; and applied it to 1,142 adult patients awaiting orthopaedic surgery. Patients were stratified into four priority groups and underwent surgery at three COVID-free sites, including one with access to a high dependency unit (HDU) or intensive care unit (ICU) and specialist resources. Safety was assessed by the number of patients requiring inpatient postoperative HDU/ICU admission, contracting COVID-19 within 14 days postoperatively, and mortality within 30 days postoperatively. RESULTS: A total of 1,142 patients were included, 47 declined surgery, and 110 were deemed high-risk or requiring specialist resources. In the ten-week study period, 28 high-risk patients underwent surgery, during which 68% (13/19) of Priority 2 (P2, surgery within one month) patients underwent surgery, and 15% (3/20) of P3 ( three months) groups. Of the 1,032 low-risk patients, 322 patients underwent surgery. Overall, 21 P3 and P4 patients were expedited to 'Urgent' based on biopsychosocial factors identified by the SPAG. During the study period, 91% (19/21) of the Urgent group, 52% (49/95) of P2, 36% (70/196) of P3, and 26% (184/720) of P4 underwent surgery. No patients died or were admitted to HDU/ICU, or contracted COVID-19. CONCLUSION: Our widely generalizable model enabled the restart of planned surgery during the COVID-19 pandemic, without compromising patient safety or excluding high-risk or complex cases. Patients classified as Urgent or P2 were most likely to undergo surgery, including those deemed high-risk. This model, which includes assessment of biopsychosocial factors alongside disease severity, can assist in equitably prioritizing the substantial list of patients now awaiting planned orthopaedic surgery worldwide. Cite this article: Bone Jt Open 2021;2(2):134-140
Immersive virtual reality enables technical skill acquisition for scrub nurses in complex revision total knee arthroplasty.
INTRODUCTION: Immersive Virtual Reality (iVR) is a novel technology which can enhance surgical training in a virtual environment without supervision. However, it is untested for the training to select, assemble and deliver instrumentation in orthopaedic surgery-typically performed by scrub nurses. This study investigates the impact of an iVR curriculum on this facet of the technically demanding revision total knee arthroplasty. MATERIALS AND METHODS: Ten scrub nurses completed training in four iVR sessions over a 4-week period. Initially, nurses completed a baseline real-world assessment, performing their role with real equipment in a simulated operation assessment. Each subsequent iVR session involved a guided mode, where the software taught participants the procedural choreography and assembly of instrumentation in a simulated operating room. In the latter three sessions, nurses also undertook an assessment in iVR. Outcome measures were related to procedural sequence, duration of surgery and efficiency of movement. Transfer of skills from iVR to the real world was assessed in a post-training simulated operation assessment. A pre- and post-training questionnaire assessed the participants knowledge, confidence and anxiety. RESULTS: Operative time reduced by an average of 47% across the 3 unguided sessions (mean 55.5 ± 17.6 min to 29.3 ± 12.1 min, p > 0.001). Assistive prompts reduced by 75% (34.1 ± 16.8 to 8.6 ± 8.8, p < 0.001), dominant hand motion by 28% (881.3 ± 178.5 m to 643.3 ± 119.8 m, p < 0.001) and head motion by 36% (459.9 ± 99.7 m to 292.6 ± 85.3 m, p < 0.001). Real-world skill improved from 11% prior to iVR training to 84% correct post-training. Participants reported increased confidence and reduced anxiety in scrubbing for rTKA procedures (p < 0.001). CONCLUSIONS: For scrub nurses, unfamiliarity with complex surgical procedures or equipment is common. Immersive VR training improved their understanding, technical skills and efficiency. These iVR-learnt skills transferred into the real world
Constructing a Stochastic Model of Bumblebee Flights from Experimental Data
PMCID: PMC3592844This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited
Collaborative team training in virtual reality is superior to individual learning for performing complex open surgery: a randomised controlled trial
Objective: To assess if multiplayer virtual reality (VR) training was superior to single player training for acquisition of both technical and non-technical skills in learning complex surgery. Summary Background Data: Superior team-work in the operating room (OR) is associated with improved technical performance and clinical outcomes. VR can successfully train OR staff individually, however VR team training has yet to be investigated. Method: Forty participants were randomised to individual or team VR training. Individually-trained participants practiced alongside virtual avatar counterparts, whilst teams trained live in pairs. Both groups underwent five VR training sessions over 6-weeks. Subsequently, they underwent a real-life assessment in which they performed Anterior Approach Total Hip Arthroplasty (AA-THA) surgery on a high-fidelity model with real equipment in a simulated OR. Teams performed together and individually-trained participants were randomly paired up. Videos were marked by two blinded assessors recording the NOTSS, NOTECHS II and SPLINTS scores. Secondary outcomes were procedure time and number of technical errors. Results: Teams outperformed individually-trained participants for non-technical skills in the real-world assessment (NOTSS 13.1±1.5 vs 10.6±1.6, P=0.002, NOTECHS-II score 51.7±5.5 vs 42.3±5.6, P=0.001 and SPLINTS 10±1.2 vs 7.9±1.6, P=0.004). They completed the assessment 28.1% faster (27.2 minutes±5.5 vs 41.8 ±8.9, P<0.001), and made fewer than half the number of technical errors (10.4±6.1 vs 22.6±5.4, P<0.001). Conclusions: Multiplayer training leads to faster surgery with fewer technical errors and the development of superior non-technical skills
Recommended from our members
Impacts of household sources on air pollution at village and regional scales in India
Approximately 3 billion people worldwide cook with solid fuels, such as wood, charcoal, and agricultural residues. These fuels, also used for residential heating, are often combusted in inefficient devices, producing carbonaceous emissions. Between 2.6 and 3.8 million premature deaths occur as a result of exposure to fine particulate matter from the resulting household air pollution (Health Effects Institute, 2018a; World Health Organization, 2018). Household air pollution also contributes to ambient air pollution; the magnitude of this contribution is uncertain. Here, we simulate the distribution of the two major health-damaging outdoor air pollutants (PM2:5 and O3) using state-of-thescience emissions databases and atmospheric chemical transport models to estimate the impact of household combustion on ambient air quality in India. The present study focuses on New Delhi and the SOMAARTH Demographic, Development, and Environmental Surveillance Site (DDESS) in the Palwal District of Haryana, located about 80 km south of New Delhi. The DDESS covers an approximate population of 200 000 within 52 villages. The emissions inventory used in the present study was prepared based on a national inventory in India (Sharma et al., 2015, 2016), an updated residential sector inventory prepared at the University of Illinois, updated cookstove emissions factors from Fleming et al. (2018b), and PM2:5 speciation from cooking fires from Jayarathne et al. (2018). Simulation of regional air quality was carried out using the US Environmental Protection Agency Community Multiscale Air Quality modeling system (CMAQ) in conjunction with the Weather Research and Forecasting modeling system (WRF) to simulate the meteorological inputs for CMAQ, and the global chemical transport model GEOS-Chem to generate concentrations on the boundary of the computational domain. Comparisons between observed and simulated O3 and PM2:5 levels are carried out to assess overall airborne levels and to estimate the contribution of household cooking emissions
Recommended from our members
A Simple Technique to Remove an Incarcerated Ceramic Liner in Revision Hip Arthroplasty.
Extraction of a well-fixed ceramic liner during revision total hip arthroplasty can be technically challenging, particularly when acetabular fixation screws prevent en bloc removal of the shell and insert without causing collateral damage to the adjacent pelvic bone. It is also important to remove the ceramic liner intact, as ceramic debris left in the joint may cause third body wear with premature articular wear of the revised implants. We describe a novel technique to extract an incarcerated ceramic liner when previously described strategies prove ineffective. Knowledge of this technique will help surgeons avoid unnecessary damage to the acetabular bone and optimize prospects for stable implantation of revision components
Anthropometric indices of Gambian children after one or three annual rounds of mass drug administration with azithromycin for trachoma control.
BACKGROUND: Mass drug administration (MDA) with azithromycin, carried out for the control of blinding trachoma, has been linked to reduced mortality in children. While the mechanism behind this reduction is unclear, it may be due, in part, to improved nutritional status via a potential reduction in the community burden of infectious disease. To determine whether MDA with azithromycin improves anthropometric indices at the community level, we measured the heights and weights of children aged 1 to 4 years in communities where one (single MDA arm) or three annual rounds (annual MDA arm) of azithromycin had been distributed. METHODS: Data collection took place three years after treatment in the single MDA arm and one year after the final round of treatment in the annual MDA arm. Mean height-for-age, weight-for-age and weight-for-height z scores were compared between treatment arms. RESULTS: No significant differences in mean height-for-age, weight-for-age or weight-for-height z scores were found between the annual MDA and single MDA arms, nor was there a significant reduction in prevalence of stunting, wasting or underweight between arms. CONCLUSIONS: Our data do not provide evidence that community MDA with azithromycin improved anthropometric outcomes of children in The Gambia. This may suggest reductions in mortality associated with azithromycin MDA are due to a mechanism other than improved nutritional status
SGC - Structural Biology and Human Health: A New Approach to Publishing Structural Biology Results
The Structural Genomics Consortium (SGC) is a not-for-profit, public-private partnership established to deliver novel structural biology knowledge on proteins of medical relevance and place this information into the public domain without restriction, spearheading the concept of "Open-Source Science" to enable drug discovery. The SGC is a major provider of structural information focussed on proteins related to human health, contributing 20.5% of novel structures released by the PDB in 2008. In this article we describe the PLoS ONE Collection entitled 'Structural Biology and Human Health: Medically Relevant Proteins from the SGC'. This Collection contains a series of articles documenting many of the novel protein structures determined by the SGC and work to further characterise their function. Each article in this Collection can be read in an enhanced version where we have integrated our interactive and intuitive 3D visualisation platform, known as iSee. This publishing platform enables the communication of complex structural biology and related data to a wide audience of non-structural biologists. With the use of iSee as the first example of an interactive and intuitive 3D document publication method as part of PLoS ONE, we are pushing the boundaries of structural biology data delivery and peer-review. Our strong desire is that this step forward will encourage others to consider the need for publication of three dimensional and associated data in a similar manner. © 2009 Lee et al
- …