Passive and active mechanics of Banksia seed pods

Biological materials consist of only a few basic building blocks, namely sugars, proteins and a few minerals which are assembled into structurally complex materials to ensure (multi)functionality for the particular organism. Prominent examples are bone or nacre, composites of mineral and protein possessing high stiffness and strength. Apart from mineralized materials, protein- and sugar-based materials such as spider dragline silk or plant fibres achieve similarly high values. On the other end of the scale are soft materials with 3 to 4 magnitude lower stiffness and strength values (eg. parenchymatic tissue or artery). Common concept for all biological materials is that a wide range of material properties is achieved by structuring rather than changing their chemical components and frequently materials combine high strength and toughness when needed. A comprehensive understanding of the structure function relationships of biological materials requires measurements of mechanical properties at a range of different length scales, often in combination with other techniques (eg. X-rays, microscopy, spectroscopy). This approach will be illustrated on the example of plants and especially dead but multifunctional tissues such as the seed pods of Banksia attenuata, a native Australian species. The seed storing pods can remain on the plant for up to 15 years without metabolism before they open upon elevated temperatures (eg. caused by bush fires). During the storage period the seed pod material must passively resist weathering, microbial degradation and attacks by bird beaks. Interestingly, the seed pods do not open at uniform temperatures. Instead, opening temperatures change gradually along a climatic South-North gradient increasing towards North. We were able to identify the “temperature sensor” of the seed pods: the inner curvature of the layered follicles gradually increases providing Northern seed pods with a higher flexural rigidity. Opening is activated by a temperature-dependent decrease of the elastic modulus of the inner resistance layer, allowing pre-stresses to be released. However, the initial opening is not sufficient to release the seeds, further opening is fueled by moisture changes which lead to directional swelling and at the same time to changing mechanical properties in different layers of the seed pod. The findings on Banksia seed pods provide inspiration for self-sensing, moving and actuating materials and systems. We expect a comparably easy transfer into technical application because metabolism and biological signaling is not required for functionality. Since the material consists only of a few basic building blocks, namely cellulose, hemicelluloses, lignin, tannins and waxes, recycling and sustainable material use seem to be much easier compared to multi-component composites

RNA-Mediated Gene Silencing in Hematopoietic Cells

In the past few years, the discovery of RNA-mediated gene silencing mechanisms, like RNA interference (RNAi), has revolutionized our understanding of eukaryotic gene expression. These mechanisms are activated by double-stranded RNA (dsRNA) and mediate gene silencing either by inducing the sequence-specific degradation of complementary mRNA or by inhibiting mRNA translation. RNAi now provides a powerful experimental tool to elucidate gene function in vitro and in vivo, thereby opening new exciting perspectives in the fields of molecular analysis and eventually therapy of several diseases such as infections and cancer. In hematology, numerous studies have described the successful application of RNAi to better define the role of oncogenic fusion proteins in leukemogenesis and to explore therapeutic approaches in hematological malignancies. In this review, we highlight recent advances and caveats relating to the application of this powerful new methodology to hematopoiesis

Micromechanical properties of common yew ( Taxus baccata ) and Norway spruce ( Picea abies ) transition wood fibers subjected to longitudinal tension

The longitudinal modulus of elasticity of common yew is astonishingly low in light of its high raw density. At least this was found for specimens examined at the solid wood level and at the tissue level. However, to reveal if this low axial stiffness is also present at the cellular level, tensile tests were performed on individual yew fibers and on spruce fibers for reference. The results revealed a low stiffness and a high strain to fracture for yew when compared with spruce. This compliant behavior was ascribed to a relatively high microfibril angle of yew measured by X-ray scattering. It can be concluded that the high compliance of yew observed at higher hierarchical levels is obviously controlled by a structural feature present at the cell wall level. In future studies, the biomechanical function of this compliant behavior for the living yew tree would be of particular interes

Chemical composition, particle geometry, and micro-mechanical strength of barley husks, oat husks, and wheat bran as alternative raw materials for particleboards

Particleboards are used worldwide in various industry segments, like construction and furniture production. Nevertheless, increase in wood prices and logistical challenges urge the particleboard industry to find alternative raw materials. By-products and residues from the agricultural and food industries could offer possibilities for material sourcing at a local level. This study aimed to investigate the chemical composition, particle geometry, anatomical structure, and microtensile characteristics of such material, specifically barley husks (BH), oat husks (OH), and wheat bran (WB). BH and OH were found to have comparable hemicelluloses and lignin contents to industrial wood chips but contained more ash. WB was rich in extractives and showed high buffering capacity. Light microscopy and microcomputed tomography revealed details of leaf structure for BH and OH as well as the multi-layer structure of WB. The ultimate microtensile strength of BH, various OH samples, and WB were respectively 2.77 GPa, 0.84–2.42 GPa, and 1.45 GPa. The results indicated that the studied materials could have potential uses as furnish materials in non-load bearing particleboards, where thermal or acoustic insulation properties are desirable

Experimental micromechanical characterisation of wood cell walls

International audienceThe properties of wood and wood based materials are strongly dependent on the properties of its fibres; i.e. the cell wall properties. The ability to characterize these in order to increase our understanding of structure-property relationships is thus highly important. This article gives a brief overview of the state of the art in experimental techniques to characterize the mechanical properties of wood at both the level of the single cell and that of the cell-wall. Challenges, opportunities, drawbacks and limitations of single fibre tensile tests and nanoindentation are discussed with respect to the wood material properties

Lentivirus-mediated antagomir expression for specific inhibition of miRNA function

Micro RNAs (miRNA) regulate gene expression by hybridization and recruitment of multi-protein complexes to complementary mRNA target sequences. miRNA function can transiently be antagonized by antagomirs—chemically modified oligonucleotides complementary to individual miRNAs. Here, we describe the induction of stable loss-of-function phenotypes for specific miRNAs by lentivirus-mediated antagomir expression. Lentivirally expressed antagomirs are transcribed from a H1-promoter located within the lentiviral 3′LTR and were directed against miRNAs encoded on the polycistronic miR17-92 transcript. Functional silencing of miR-18a, miR-19b and miR-20a by the corresponding antagomirs specifically relieves miRNA-mediated reporter gene repression. Inhibition of miRNA function correlates to reduction of ‘miRNA’ amplification by miRNA-specific quantitative RT-PCR. Furthermore, protein expression of E2F-1, a known miR-20 target, is enhanced by lentivirally expressed anti-miR-20 antagomirs in a dose-dependent manner, whereas over-expression of miR-20a reduces E2F-1 levels. Finally, combined over-expression of specific miRNAs and antagomirs reveals individual and complementary functions of miR-18a and miR-20a and demonstrates specific miRNA impact on cell proliferation in a cell culture model

An AP2/ERF transcription factor ERF139 coordinates xylem cell expansion and secondary cell wall deposition

Abstract Differentiation of xylem elements involves cell expansion, secondary cell wall deposition and programmed cell death. Transitions between these phases require strict spatiotemporal control. The function of Populus ERF139 (Potri.013G101100) in xylem differentiation was characterized in transgenic overexpression and dominant repressor lines of ERF139 in hybrid aspen (Populus tremula x tremuloides). Xylem properties, secondary cell wall (SCW) chemistry and downstream targets were analyzed in both types of transgenic trees using microscopy techniques, FT-IR, pyrolysis-GC/MS, wet chemistry methods and RNA sequencing. Opposite phenotypes were observed in the secondary xylem vessel sizes and SCW chemistry in the two different types of transgenic trees, supporting the function of ERF139 in suppressing the radial expansion of vessel elements and stimulating accumulation of guaiacyl-type lignin and possibly also xylan. Comparative transcriptomics identified genes related to SCW biosynthesis (LAC5, LBD15, MYB86) and salt and drought stress responsive genes (ANAC002, ABA1) as potential direct targets of ERF139. The phenotypes of the transgenic trees and the stem expression profiles of ERF139 potential target genes support the role of ERF139 as a transcriptional regulator of xylem cell expansion and SCW formation, possibly in response to osmotic changes of the cells. This article is protected by copyright. All rights reserved.Peer reviewe

Fabrication, microstructure, and properties of fired clay bricks using construction and demolition waste sludge as the main additive

Green routes to prepare or manufacture sustainable building materials have been attracting much attention over the years targeting sustainability issues. In this investigation, for the first time, sludge from the inert mineral part of the construction and demolition waste (RA-S) is used as a primary raw material in the fabrication of fired bricks for building purposes. Fired bricks fabricated with different dosages of RA-S and earth material (i.e., 0%, 30%, 50%, 70%, and 100% by weight) were prepared and evaluated in terms of their physical-chemical properties. The RA-S was characterized, and the results showed that it could be classified as a clayey material and richly graded silty sand according to the French Standards. XRD analysis revealed that the addition of the RA sludge into raw earth material provoked changes slightly in the fired bricks. The compressive strength (CS) results indicated that the CS of the fired bricks increased with the addition of the RA-S from 30% to 70%. The highest CS was attained at the firing temperature of 800 °C. The density of the fired brick slightly reduced with the RA-S addition. The thermal conductivity results suggest that RA-S has better insulation properties compared to earth material. The RA-S sludge can be used in combination with earth material to fabricate fired bricks, which can meet the requirements of many Standards all over the World. In the light of these results, it is possible to say that the RA-S generated from recycling inert mineral part of construction and demolition waste plant is an excellent raw material to prepare efficient fired bricks that can be successfully employed in the real construction sector. Also, the highlighted results suggest that brickwork factories have the opportunity to improve production quality while significantly reducing manufacturing time, energy consumption, resource depletion, and environmental impact.The authors are also grateful to the Council for the Development of Higher Education at Graduate Level, Brazil (CAPES) for the postdoctoral scholarship granted through the National Postdoctoral Program (PNPD). The authors also thank Mr. Ferro, president of Esterel Terassement, for financial support and for providing the RA-S samples. Dr. Simoes dos Reis gives a special thanks to the cooperation opportunity between UFRGS and IFSTTAR through his Post-doctoral studies provided by PNPD. E.C. Lima thanks to Foundation for Research Support of the State of Rio Grande do Sul (FAPERGS), and National Council for Scientific and Technological Development (CNPq, Brazil) for financial support and sponsorship.Peer ReviewedPostprint (author's final draft

Mitochondrial Haplogroups, Control Region Polymorphisms and Malignant Melanoma: A Study in Middle European Caucasians

Because mitochondria play an essential role in energy metabolism, generation of reactive oxygen species (ROS), and apoptosis, sequence variation in the mitochondrial genome has been postulated to be a contributing factor to the etiology of multifactorial age-related diseases, including cancer. The aim of the present study was to compare the frequencies of mitochondrial DNA (mtDNA) haplogroups as well as control region (CR) polymorphisms of patients with malignant melanoma (n = 351) versus those of healthy controls (n = 1598) in Middle Europe.Using primer extension analysis and DNA sequencing, we identified all nine major European mitochondrial haplogroups and known CR polymorphisms. The frequencies of the major mitochondrial haplogroups did not differ significantly between patients and control subjects, whereas the frequencies of the one another linked CR polymorphisms A16183C, T16189C, C16192T, C16270T and T195C were significantly higher in patients with melanoma compared to the controls. Regarding clinical characteristics of the patient cohort, none of the nine major European haplogroups was associated with either Breslow thickness or distant metastasis. The CR polymorphisms A302CC-insertion and T310C-insertion were significantly associated with mean Breslow thickness, whereas the CR polymorphism T16519C was associated with metastasis.Our results suggest that mtDNA variations could be involved in melanoma etiology and pathogenesis, although the functional consequence of CR polymorphisms remains to be elucidated

Protecting Offspring Against Fire: Lessons From Banksia Seed Pods

Wildfires are a natural component in many terrestrial ecosystems and often play a crucial role in maintaining biodiversity, particularly in the fire-prone regions of Australia. A prime example of plants that are able to persist in these regions is the genus Banksia. Most Banksia species that occur in fire-prone regions produce woody seed pods (follicles), which open during or soon after fire to release seeds into the post-fire environment. For population persistence, many Banksia species depend on recruitment from these canopy-stored seeds. Therefore, it is critical that their seeds are protected from heat and rapid oxidation during fire. Here, we show how different species of Banksia protect their seeds inside follicles while simultaneously opening up when experiencing fire. The ability of the follicles to protect seeds from heat is demonstrated by intense 180 s experimental burns, in which the maximum temperatures near the seeds ranged from ∼75°C for B. serrata to ∼90°C for B. prionotes and ∼95°C for B. candolleana, contrasting with the mean surface temperature of ∼450°C. Many seeds of native Australian plants, including those of Banksia, are able to survive these temperatures. Structural analysis of individual follicles from these three Banksia species demonstrates that all of them rely on a multicomponent system, consisting of two valves, a porous separator and a thin layer of air surrounding the seeds. The particular geometric arrangement of these components determines the rate of heat transfer more than the tissue properties alone, revealing that a strong embedment into the central rachis can compensate for thin follicle valves. Furthermore, we highlight the role of the separator as an important thermal insulator. Our study suggests that the genus Banksia employs a variety of combinations in terms of follicle size, valve thickness, composition and geometric arrangement to effectively protect canopy-stored seeds during fire