Empirical multi-band characterization of propagation with modelling aspects for communictions

Diese Arbeit präsentiert eine empirische Untersuchung der Wellenausbreitung für drahtlose Kommunikation im Millimeterwellen- und sub-THz-Band, wobei als Referenz das bereits bekannte und untersuchte sub-6-GHz-Band verwendet wird. Die großen verfügbaren Bandbreiten in diesen hohen Frequenzbändern erlauben die Verwendung hoher instantaner Bandbreiten zur Erfüllung der wesentlichen Anforderungen zukünftiger Mobilfunktechnologien (5G, “5G and beyond” und 6G). Aufgrund zunehmender Pfad- und Eindringverluste bei zunehmender Trägerfrequenz ist die resultierende Abdeckung dabei jedoch stark reduziert. Die entstehenden Pfadverluste können durch die Verwendung hochdirektiver Funkschnittstellen kompensiert werden, wodurch die resultierende Auflösung im Winkelbereich erhöht wird und die Notwendigkeit einer räumlichen Kenntnis der Systeme mit sich bringt: Woher kommt das Signal? Darüber hinaus erhöhen größere Anwendungsbandbreiten die Auflösung im Zeitbereich, reduzieren das small-scale Fading und ermöglichen die Untersuchung innerhalb von Clustern von Mehrwegekomponenten. Daraus ergibt sich für Kommunikationssysteme ein vorhersagbareres Bild im Winkel-, Zeit- und Polarisationsbereich, welches Eigenschaften sind, die in Kanalmodellen für diese Frequenzen widergespiegelt werden müssen. Aus diesem Grund wurde in der vorliegenden Arbeit eine umfassende Charakterisierung der Wellenausbreitung durch simultane Multibandmessungen in den sub-6 GHz-, Millimeterwellen- und sub-THz-Bändern vorgestellt. Zu Beginn wurde die Eignung des simultanen Multiband-Messverfahrens zur Charakterisierung der Ausbreitung von Grenzwert-Leistungsprofilen und large-scale Parametern bewertet. Anschließend wurden wichtige Wellenausbreitungsaspekte für die Ein- und Multibandkanalmodellierung innerhalb mehrerer Säulen der 5G-Technologie identifiziert und Erweiterungen zu verbreiteten räumlichen Kanalmodellen eingeführt und bewertet, welche die oben genannten Systemaspekte abdecken.This thesis presents an empirical characterization of propagation for wireless communications at mm-waves and sub-THz, taking as a reference the already well known and studied sub-6 GHz band. The large blocks of free spectrum available at these high frequency bands makes them particularly suitable to provide the necessary instantaneous bandwidths to meet the requirements of future wireless technologies (5G, 5G and beyond, and 6G). However, isotropic path-loss and penetration-loss are larger with increasing carrier frequency, hence, coverage is severely reduced. Path-loss can be compensated with the utilization of highly directive radio-interfaces, which increases the resolution in the angular domain. Nonetheless, this emphasizes the need of spatial awareness of systems, making more relevant the question “where does the signal come from?” In addition, larger application bandwidths increase the resolution in the time domain, reducing small-scale fading and allowing to observe inside of clusters of multi-path components (MPCs). Consequently, communication systems have a more deterministic picture of the environment in the angular, time, and polarization domain, characteristics that need to be reflected in channel models for these frequencies. Therefore, in the present work we introduce an extensive characterization of propagation by intensive simultaneous multi-band measurements in the sub-6 GHz, mm-waves, and sub-THz bands. Firstly, the suitability of the simultaneous multi-band measurement procedure to characterize propagation from marginal power profiles and large-scale parameters (LSPs) has been evaluated. Then, key propagation aspects for single and multi-band channel modelling in several verticals of 5G have been identified, and extensions to popular spatial channel models (SCMs) covering the aforementioned system aspects have been introduced and evaluated

Multi-band propagation and radio channel characterization in street canyon scenarios for 5G and beyond

Radio access at mm-waves has been subject of intensive research in the latest years. However, within the initial deployment of 5G, mm-waves are still relegated and there is a generalized idea that the mm-wave channel for radio access, in comparison to the sub-6 GHz channel, is not only sparse but also troublesome for outdoor applications. In the present paper we introduce simultaneous multi-band measurements comparing the sub-6 GHz with the mm-waves channel at 30 GHz and 60 GHz in street canyon scenarios using the same measurement equipment in Germany and Japan. An analysis on the propagation and radio channel characteristics shows that the mm-waves channel offers similar opportunities as the sub-6 GHz. Consequently, the challenge relies on the design of an adequate radio interface matching the channel characteristics. In that regard, aspects as the location of clusters and spatial consistency gain importance within geometry-based stochastic channel models (GBSCMs). The analysis of the large-scale parameters (LSPs) has shown a large influence of the geometry of the scenario on the channel, encouraging the introduction of deterministic modelling components within GBSCMs targeting these scenarios

Item level characterization of mm-wave indoor propagation

According to the current prospect of allocating next generation wireless systems in the underutilized millimeter frequency bands, a thorough characterization of mm-wave propagation represents a pressing necessity. In this work, an “item level” characterization of radiowave propagation at 70 GHz is carried out. The scattering properties of several, different objects commonly present in indoor environment are investigated by means of measurements carried out in an anechoic chamber. The measured data have been also exploited to tune some parameters of a 3D ray tracing model

Ray-tracing-based mm-wave beamforming assessment

The use of large-size antenna arrays to implement pencil-beam forming techniques is becoming a key asset to cope with the very high throughput density requirements and high path-loss of future millimeter-wave (mm-wave) gigabit-wireless applications. Suboptimal beamforming (BF) strategies based on search over discrete set of beams (steering vectors) are proposed and implemented in present standards and applications. The potential of fully adaptive advanced BF strategies that will become possible in the future, thanks to the availability of accurate localization and powerful distributed computing, is evaluated in this paper through system simulation. After validation and calibration against mm-wave directional indoor channel measurements, a 3-D ray tracing model is used as a propagation-prediction engine to evaluate performance in a number of simple, reference cases. Ray tracing itself, however, is proposed and evaluated as a real-time prediction tool to assist future BF techniques

Towards joint communication and sensing (Chapter 4)

Localization of user equipment (UE) in mobile communication networks has been supported from the early stages of 3rd generation partnership project (3GPP). With 5th Generation (5G) and its target use cases, localization is increasingly gaining importance. Integrated sensing and localization in 6th Generation (6G) networks promise the introduction of more efficient networks and compelling applications to be developed

Efecto de la temperatura durante el llenado de las semillas sobre la concentración de tocoferoles en un híbrido tradicional de girasol

The effect of night temperature during short periods in seed filling on oil tocopherol content and tocopherol/linoleic acid ratio was investigated in a traditional sunflower hybrid. Seeds were sown in the field at Balcarce on the 3rd and 22nd of November. In each experiment, treatments in which night temperature was increased at three consecutive periods of 200 °C day (base temperature: 6 °C) were applied.Tocopherol concentration was reduced when night temperature was increased early in seed filling. Such an increase could be attributed to a correlative increase in the daily average temperature, as no differences in tocopherol concentration were found when plants were cultivated in growth chambers under different day/night temperature but at the same daily average temperature. Temperature affected tocopherol concentration mainly by affecting the oil weight per seed.The tocopherol/linoleic acid ratio was not affected by temperature.Se investigó el efecto de la temperatura durante períodos cortos en el llenado de las semillas sobre la concentración de tocoferoles y la relación tocoferoles/ácido linoleico en un híbrido tradicional de girasol. Se realizó una siembra en campo en Balcarce el 3 y el 22 de noviembre. En cada experimento, se aplicaron tratamientos donde se incrementó la temperatura de la noche en tres períodos consecutivos de 200 °C día (temperatura base: 6 °C). La concentración de tocoferoles disminuyó cuando se incrementó la temperatura de la noche temprano durante el llenado de las semillas. Dicho aumento puede ser atribuido a aumentos en la temperatura media diaria ya que no se observaron diferencias en la concentración de tocoferoles cuando se cultivaron plantas en cámaras de crecimiento con distinta temperatura nocturna y la misma temperatura media diaria. La temperatura afectó la concentración de tocoferoles principalmente al afectar el peso de aceite por semilla. La relación tocoferoles/ ácido linoleico no fue afectada por la temperatura

MDD-Enabled Two-Tier Terahertz Fronthaul in Indoor Industrial Cell-Free Massive MIMO

To make indoor industrial cell-free massive multiple-input multiple-output (CF-mMIMO) networks free from wired fronthaul, this paper studies a multicarrier-division duplex (MDD)-enabled two-tier terahertz (THz) fronthaul scheme. More specifically, two layers of fronthaul links rely on the mutually orthogonal subcarreir sets in the same THz band, while access links are implemented over sub-6G band. The proposed scheme leads to a complicated mixed-integer nonconvex optimization problem incorporating access point (AP) clustering, device selection, the assignment of subcarrier sets between two fronthaul links and the resource allocation at both the central processing unit (CPU) and APs. In order to address the formulated problem, we first resort to the low-complexity but efficient heuristic methods thereby relaxing the binary variables. Then, the overall end-to-end rate is obtained by iteratively optimizing the assignment of subcarrier sets and the number of AP clusters. Furthermore, an advanced MDD frame structure consisting of three parallel data streams is tailored for the proposed scheme. Simulation results demonstrate the effectiveness of the proposed dynamic AP clustering approach in dealing with the varying sizes of networks. Moreover, benefiting from the well-designed frame structure, MDD is capable of outperforming TDD in the two-tier fronthaul networks. Additionally, the effect of the THz bandwidth on system performance is analyzed, and it is shown that with sufficient frequency resources, our proposed two-tier fully-wireless fronthaul scheme can achieve a comparable performance to the fiber-optic based systems. Finally, the superiority of the proposed MDD-enabled fronthaul scheme is verified in a practical scenario with realistic ray-tracing simulations