Antibacterial effect of essential oils of two plants Eucalyptus camaldulensis and Artemisia herba alba on some bacterial strains

Essential oils are secondary plant metabolites and have many therapeutic properties. The aim of our study is to determine the antibacterial effect of the essential oils of two plants cultivated in a semi-arid region located in the Northeast of Algeria (Tebessa), Eucalyptus camaldulensis (Myrtaceae) and Artemisia herba alba (Asteraceae). The yield of essential oils of the two plants were 1.45 ± 0.026 and 1.21 ± 0.061 g/100 g of the dry matter of the aerial part respectively. The test of the antibacterial effect is based on the diffusion method on solid medium (sensitivity), this method allows us to determine the susceptibility or resistance of an organism vis-à-vis the sample studied. Our study reveals that E. camaldulensis essential oil had very strong activity on all bacterial strains tested, except on Pseudomonas aeruginosa and Enterococcus faecalis for which there was no inhibitory effect. However, A. herba alba essential oil had very strong activity on all bacterial strains tested except on Pseudomonas aeruginosa. The MIC of Artemisia essential oil ranged between 0.08 and 1.57 µL/mL, with the lowest activity for S. aureus and P. mirabilis (1.57 µL/mL) and the highest activity was observed against E. feacalis, E. coli, and K. pneumonia (0.09 µL/mL). The MIC of the second plant EO ranged between 0.08 and 0.36 µL/mL, with the lowest activity for P. mirabilis (0.36 µL/mL) and the highest one was observed against S. saprophyticus and E. coli (0.08 µL/mL). Statistical analysis shows that the two plants have the same efficacy against S. saprophyticus while E. faecalis, K. pneumoniae and P. mirabilis species are affected more by the essential oil of A. herba alba. While, E. camaldulensis has a higher efficiency than that of A. herba alba on the species: S. aureus and E. coli. Therefore, the essential oils of E. camaldulensis and A. herba alba suggests avenues for further non clinical and clinical studies

Multi-level optical signal generation using a segmented-electrode InP IQ-MZM with integrated CMOS binary drivers

We present a segmented-electrode InP IQ-MZM, capable of multi-level optical signal generation (5-bit per I/Q arm) by employing direct digital drive from integrated, low-power (1W) CMOS binary drivers. Programmable, multi-level operation is demonstrated experimentally on one MZM of the device

Data acquisition software for the CMS strip tracker

The CMS silicon strip tracker, providing a sensitive area of approximately 200 m2 and comprising 10 million readout channels, has recently been completed at the tracker integration facility at CERN. The strip tracker community is currently working to develop and integrate the online and offline software frameworks, known as XDAQ and CMSSW respectively, for the purposes of data acquisition and detector commissioning and monitoring. Recent developments have seen the integration of many new services and tools within the online data acquisition system, such as event building, online distributed analysis, an online monitoring framework, and data storage management. We review the various software components that comprise the strip tracker data acquisition system, the software architectures used for stand-alone and global data-taking modes. Our experiences in commissioning and operating one of the largest ever silicon micro-strip tracking systems are also reviewed

A Gas Leak Rate Measurement System for the ATLAS MUON BIS-Monitored Drift Tubes

A low-cost, reliable and precise system developed for the gas leak rate measurement of the BIS-Monitored Drift Tubes (MDTs) for the ATLAS Muon Spectrometer is presented. In order to meet the BIS-MDT mass production rate, a total number of 100 tubes are tested simultaneously in this setup. The pressure drop of each one of the MDT is measured, within a typical time interval of 48 hours, via a differential manometer comparing with the pressure of a gas tight reference tube. The precision of the method implemented is based on the system temperature homogeneity, with accuracy of ÄT = 0.3 oC. For this reason, two thermally isolated boxes are used testing 50 tubes each of them, to achieve high degree of temperature uniformity and stability. After measuring several thousands of the MDTs, the developed system is confirmed to be appropriate within the specifications for testing the MDTs during the mass production

A Study Of Cadmium Sulfide Nanoparticles With Starch As A Capping Agent

Capping agents such as starch can be used to protect semiconductor nanoparticles from aggregation and obtain uniform structures. Cadmium sulfide (CdS) nanoparticles with starch as a capping agent were prepared with an aqueous precipitation technique at different pH levels to study the optimum condition for producing a narrow distribution of nanoparticles. The morphology of the prepared nanoparticles was measured by scanning electron microscopy (SEM). Grain sizes of the samples determined by X-ray Diffraction (XRD) with Scherer’s equation were relatively dependet on the pH applied in the synthesized process. Infrared spectroscopy (FT-IR) indicated that the starch and the nanoparticles were bonded by R-N=C=S bonds, but bondinbg depended on the pH used. The band gap of the CdS nanoparticles measured by UV-Vis spectroscopy was 2.39 eV, which was lower than CdS in bulk phase because of distorted structures in obtained CdS nanoparticles

Study of Tau-pair Production in Photon-Photon Collisions at LEP and Limits on the Anomalous Electromagnetic Moments of the Tau Lepton

Tau-pair production in the process e+e- -> e+e-tau+tau- was studied using data collected by the DELPHI experiment at LEP2 during the years 1997 - 2000. The corresponding integrated luminosity is 650 pb^{-1}. The values of the cross-section obtained are found to be in agreement with QED predictions. Limits on the anomalous magnetic and electric dipole moments of the tau lepton are deduced.Comment: 20 pages, 9 figures, Accepted by Eur. Phys. J.

A Measurement of the Tau Hadronic Branching Ratios

The exclusive and semi-exclusive branching ratios of the tau lepton hadronic decay modes (h- v_t, h- pi0 v_t, h- pi0 pi0 v_t, h- \geq 2pi0 v_t, h- \geq 3pi0 v_t, 2h- h+ v_t, 2h- h+ pi0 v_t, 2h- h+ \geq 2pi0 v_t, 3h- 2h+ v_t and 3h- 2h+ \geq 1pi0 v_t) were measured with data from the DELPHI detector at LEP.Comment: 53 pages, 18 figures, Accepted by Eur. Phys. J.

The Deposition and Accumulation of Microplastics in Marine Sediments and Bottom Water from the Irish Continental Shelf

Abstract Microplastics are widely dispersed throughout the marine environment. An understanding of the distribution and accumulation of this form of pollution is crucial for gauging environmental risk. Presented here is the first record of plastic contamination, in the 5 mm–250 μm size range, of Irish continental shelf sediments. Sixty-two microplastics were recovered from 10 of 11 stations using box cores. 97% of recovered microplastics were found to reside shallower than 2.5 cm sediment depth, with the area of highest microplastic concentration being the water-sediment interface and top 0.5 cm of sediments (66%). Microplastics were not found deeper than 3.5 ± 0.5 cm. These findings demonstrate that microplastic contamination is ubiquitous within superficial sediments and bottom water along the western Irish continental shelf. Results highlight that cores need to be at least 4–5 cm deep to quantify the standing stock of microplastics within marine sediments. All recovered microplastics were classified as secondary microplastics as they appear to be remnants of larger items; fibres being the principal form of microplastic pollution (85%), followed by broken fragments (15%). The range of polymer types, colours and physical forms recovered suggests a variety of sources. Further research is needed to understand the mechanisms influencing microplastic transport, deposition, resuspension and subsequent interactions with biota

Energy dependence of Cronin momentum in saturation model for p+Ap+A and A+AA+A collisions

We calculate $\sqrt{s}$ dependence of Cronin momentum for $p+A$ and $A+A$ collisions in saturation model. We show that this dependence is consistent with expectation from formula which was obtained using simple dimentional consideration. This can be used to test validity of saturation model (and distinguish among its variants) and measure $x$ dependence of saturation momentum from experimental data.Comment: LaTeX2e, 12 pages, 8 figure