2,507 research outputs found
Inverted perovskite solar cells with transparent hole transporting layer based on semiconducting nickel oxide
Perovskite (CH3NH3PbI3) solar cells (PSCs) were produced in the inverted architecture employing transparent nickel oxide (NiO) as hole transporting layer (HTL). The different functional layers of the photoconversion device were solution processed in ambient conditions the HTL of NiO being prepared via sol-gel and successively deposited by spin-coating. The conditions of preparation of the transparent HTL were optimized through the stabilization of the nickel-containing sol with bulky alcohols and strong inorganic acids. The photoactive layer of CH3NH3PbI3 was deposited in air at high relative humidity (ca. 50-60%). The electron selective contact was constituted by spin coated 3H-cyclopropa[1,9] [5,6]fullerene-C60-Ih-3'-butanoic acid 3'-phenyl methyl ester (PCBM) with solution processed 2,9-Dimethyl-4,7-diphenyl-1,10-phenanthroline (bathocuproine, BCP) as interlayer. The deposition of CH3NH3PbI3 in ambient conditions as well as the processing of the BCP interlayer from solution simplified enormously the entire procedure of device fabrication. The largest value of photoconversion efficiency (PCE) we achieved with the inverted architecture photocells was 14 % with an average PCE of 12 %. The solar cells displayed an hysteresis-free behavior with excellent time stability of the maximum power output
First examples of pyran based colorants as sensitizing agents of p-Type Dye-Sensitized solar cells
Three different pyran based dyes were synthesized and tested for the first time as photosensitizers of NiO based p-type dye-sensitized solar cells (p-DSSC). The molecules feature a similar molecular structure and are based on a pyran core that is functionalized with electron acceptor groups of different strength and is symmetrically coupled to phenothiazine donor branches. Optical properties of the dyes are deeply influenced by the nature of the electron-acceptor group, so that the overall absorption of the three dyes covers the most of the visible spectrum. The properties of devices based on the NiO electrodes sensitized with the investigated dyes were evaluated under simulated solar radiation: the larger short circuit current density exceeded 1mA/cm2 and power conversion efficiency as high as 0.04% could be recorded. The performances of the fabricated p-DSSC have been compared to a reference cell sensitized with P1, a high level benchmark, which afforded a photoelectrochemical activity similar to the best example of our pyran sensitized devices (1.19 mA/cm2 and 0.049%)
A correlation linking the predicted mean vote and the mean thermal vote based on an investigation on the human thermal comfort in short-haul domestic flights
The results of an experimental investigation on the human thermal comfort inside the cabin of some
Airbus A319 aircrafts during 14 short-haul domestic flights, linking various Italian cities, are presented
and used to define a correlation among the predicted mean vote (PMV), a procedure which is commonly
used to assess the thermal comfort in inhabited environments, and the equivalent temperature and
mean thermal vote (MTV), which are the parameters suggested by the European Standard EN ISO 14505-
2 for the evaluation of the thermal environment in vehicles.
The measurements of the radiant temperature, air temperature and relative humidity during flights
were performed. The air temperature varied between 22.2 °C and 26.0 ° C; the relative humidity ranged
from 8.7% to 59.2%. The calculated values of the PMV varied from 0.16 to 0.90 and were confirmed by
the answers of the passengers. The equivalent temperature was evaluated using the equations of Fanger
or on the basis of the values of the skin temperature measured on some volunteers.
The correlation linking the thermal sensation scales and zones used by the PMV and the MTV resulted
quite accurate because the minimum value of the absolute difference between such environmental indexes
equalled 0.0073 and the maximum difference did not exceed the value of 0.0589. Even though the
equivalent temperature and the MTV were specifically proposed to evaluate the thermal sensation in
vehicles, their use may be effectively extended to the assessment of the thermal comfort in airplanes or
other occupied places
Air quality and relative humidity in commercial aircrafts: an experimental investigation on short-haul domestic flights
Nowadays the achievement of a comfortable environment in aircraft cabins is a factor of paramount
importance in air travel business competition; on the other hand, the need of reducing the propulsion
fuel cost has driven the airline companies to adopt air handling systems that may reduce the levels of
thermal comfort and air quality inside the cabins of commercial airliners. With the aim of contributing to
a better knowledge of this matter, this paper reports the results of an experimental study upon the
indoor air quality aboard commercial aircrafts for 14 domestic flights less than 1 h and half long. The
parameters monitored were temperature, relative humidity and carbon dioxide concentration; the
measurements were performed during the whole flight from the take-off to the landing.
The relative humidity inside the cabin was also calculated using the rates of outside air and the carbon
dioxide as a ventilation tracer; the theoretical results were compared with the measured data. The
relationship between relative humidity and carbon dioxide concentration during fights was highlighted
in order to define the environmental conditions that may provide acceptable levels of both the air quality
and hygrometric comfort to the crew and passengers. The results of calculations confirmed the possibility
of improving the hygrometric conditions in aircraft cabins without the need of using humidification
systems
GaN-based modulation doped FETs and UV detectors
Abstract GaN based modulation doped field effect transistors (MODFETs) and ultraviolet detectors are critically reviewed. AlGaN/GaN MODFETs with CW power levels of about 6 W (in devices with 1 mm gate periphery) and a minimum noise figure of 0.85 dB with an associated gain of 11 dB have been obtained at 10 GHz. As a precursor to solar-blind detectors that will be operative around 280 nm, where the solar radiation is absorbed by the ozone layer surrounding the earth, detector arrays with pixel sizes of 32×32 operative near the solar-blind region have been achieved. One does not have to rely on imagination to predict that devices with much improved performance will continue to be developed
Influence of the conditions of sensitization on the characteristics of p-DSCs sensitized with asymmetric squaraines
The effect of the conditions of sensitization on the photoelectrochemical performance of p-type dye-sensitized solar cells (p-DSCs)
with screen-printed nickel oxide (NiO) photocathodes is analyzed. The dye-sensitizers employed in the present study are asymmetric
squaraines. The conditions of sensitization differ for the relative concentration of the anti-aggregating agentCDCA(chenideoxycholic
acid) with respect to the concentration of the dye-sensitizer. The co-adsorption of CDCA onto NiO electrode brings about a decrease
in the surface concentration of the anchored dye as well as a blueshift of the characteristic wavelengths of optical absorption of
the asymmetric squaraines considered here. Beside this, the employment of CDCA as co-adsorbent reduces the overall conversion
performance of the resulting squaraine-sensitized p-DSCs with consequent diminution of the short-circuit current density. This result
is ascribed to the acid action of CDCA toward the amminic nitrogen of the squaraines. Quantum efficiency spectra show that CDCA
acts as a quencher of the intrinsic photoelectrochemical activity of NiO. Moreover, CDCA does not interfere with the mechanism of
charge injection effectuated by the photoexcited squaraines. The photoelectrochemical impedance spectra was analyzed employing
a model of equivalent circuit developed for semiconducting nanostructure electrodes
- …