Evaluations of pH and High Ionic Strength Solution Effect in Cadmium Removal by Zinc Oxide Nanoparticles

For human and environmental health protection, it is necessary to remove excess cadmium in industrial wastewaters before discharging them to environment. Some laboratory experimental batch study was done to evaluate the effects of the initial cadmium concentration, adsorbent dose, pH, ionic strength, and contact time on the cadmium removal efficiency by zinc oxide nanoparticles. All tests were performed in 100 ml solution at constant temperature of 25\ub0C and mixing rate of 150 rpm. The residual cadmium concentration in the solution was determined using flame atomic absorption spectroscopy. Statistical analyses were performed on data using SPSS16 software by applying Mann-Whitney and Kruskal-Wallis tests and the result designing graphs were provided using Excel software. Finally, experimental data were analyzed using adsorption isotherm and kinetic equations. The results show that cadmium removal efficiency increases with an increase in the adsorbent dose and contact time and decreases with the increase in initial concentration of cadmium. Furthermore, it is observed that by raising the ionic strength of solution 30 fold, the adsorption rate is increased from 90.7% to 62.3%. Due to regression coefficient ( 650.99), the adsorption process follows Langmuir isotherms model and pseudo-second order equation. Attending to the outcomes, zinc oxide nanoparticles have proper efficiency in the removal of cadmium from aqueous solutions. So, they can be used in treatment of the wastewaters containing cadmium ions. However, its efficiency is deeply dependant on the ion strength and the interactions of other metals in wastewater

Characterization of Ordering in A-Site Deficient Perovskite Ca1-xLa2x/3TiO3 Using STEM/EELS

The vacancy ordering behavior of an A-site deficient perovskite system, Ca1-xLa2x/3TiO3, was studied using atomic resolution scanning transmission electron microscopy (STEM) in conjunction with electron energy-loss spectroscopy (EELS), with the aim of determining the role of A-site composition changes. At low La content (x = 0.2), adopting Pbnm symmetry, there was no indication of long-range ordering. Domains, with clear boundaries, were observed in bright-field (BF) imaging, but were not immediately visible in the corresponding high-angle annular dark-field (HAADF) image. These boundaries, with the aid of displacement maps from A-site cations in the HAADF signal, are shown to be tilt boundaries. At the La-rich end of the composition (x = 0.9), adopting Cmmm symmetry, long-range ordering of vacancies and La3+ ions was observed, with alternating La-rich and La-poor layers on (001)p planes, creating a double perovskite lattice along the c axis. These highly ordered domains can be found isolated within a random distribution of vacancies/La3+, or within a large population, encompassing a large volume. In regions with a high number density of double perovskite domains, these highly ordered domains were separated by twin boundaries, with 90° or 180° lattice rotations across boundaries. The occurrence and characteristics of these ordered structures are discussed and compared with similar perovskite systems

Osteoimmunopathology in HIV/AIDS: A Translational Evidence-Based Perspective

Infection with the human immunodeficiency virus-1 (HIV) and the resulting acquired immune deficiency syndrome (AIDS) alter not only cellular immune regulation but also the bone metabolism. Since cellular immunity and bone metabolism are intimately intertwined in the osteoimmune network, it is to be expected that bone metabolism is also affected in patients with HIV/AIDS. The concerted evidence points convincingly toward impaired activity of osteoblasts and increased activity of osteoclasts in patients with HIV/AIDS, leading to a significant increase in the prevalence of osteoporosis. Research attributes these outcomes in part at least to the ART, PI, and HAART therapies endured by these patients. We review and discuss these lines of evidence from the perspective of translational clinically relevant complex systematic reviews for comparative effectiveness analysis and evidence-based intervention on a global scale

Stabilized tilted-octahedra halide perovskites inhibit local formation of performance-limiting phases

Efforts to stabilize photoactive formamidinium (FA)–based halide perovskites for perovskite photovoltaics have focused on the growth of cubic formamidinium lead iodide (α-FAPbI3) phases by empirically alloying with cesium, methylammonium (MA) cations, or both. We show that such stabilized FA-rich perovskites are noncubic and exhibit ~2° octahedral tilting at room temperature. This tilting, resolvable only with the use of local nanostructure characterization techniques, imparts phase stability by frustrating transitions from photoactive to hexagonal phases. Although the bulk phase appears stable when examined macroscopically, heterogeneous cation distributions allow microscopically unstable regions to form; we found that these transitioned to hexagonal polytypes, leading to local trap-assisted performance losses and photoinstabilities. Using surface-bound ethylenediaminetetraacetic acid, we engineered an octahedral tilt into pure α-FAPbI3 thin films without any cation alloying. The templated photoactive FAPbI3 film was extremely stable against thermal, environmental, and light stressors

Corrosion Performance of Friction Stir Linear Lap Welded AM60B Joints

A corrosion investigation of friction stir linear lap welded AM60B joints used to fabricate an Mg alloy-intensive automotive front end sub-assembly was performed. The stir zone exhibited a slightly refined grain size and significant break-up and re-distribution of the divorced Mg17Al12 (β-phase) relative to the base material. Exposures in NaCl (aq) environments revealed that the stir zone was more susceptible to localized corrosion than the base material. Scanning vibrating electrode technique measurements revealed differential galvanic activity across the joint. Anodic activity was confined to the stir zone surface and involved initiation and lateral propagation of localized filaments. Cathodic activity was initially confined to the base material surface, but was rapidly modified to include the cathodically-activated corrosion products in the filament wake. Site-specific surface analyses revealed that the corrosion observed across the welded joint was likely linked to variations in Al distribution across the surface film/metal interface

Disease-Associated Mutant Ubiquitin Causes Proteasomal Impairment and Enhances the Toxicity of Protein Aggregates

Protein homeostasis is critical for cellular survival and its dysregulation has been implicated in Alzheimer's disease (AD) and other neurodegenerative disorders. Despite the growing appreciation of the pathogenic mechanisms involved in familial forms of AD, much less is known about the sporadic cases. Aggregates found in both familial and sporadic AD often include proteins other than those typically associated with the disease. One such protein is a mutant form of ubiquitin, UBB+1, a frameshift product generated by molecular misreading of a wild-type ubiquitin gene. UBB+1 has been associated with multiple disorders. UBB+1 cannot function as a ubiquitin molecule, and it is itself a substrate for degradation by the ubiquitin/proteasome system (UPS). Accumulation of UBB+1 impairs the proteasome system and enhances toxic protein aggregation, ultimately resulting in cell death. Here, we describe a novel model system to investigate how UBB+1 impairs UPS function and whether it plays a causal role in protein aggregation. We expressed a protein analogous to UBB+1 in yeast (Ubext) and demonstrated that it caused UPS impairment. Blocking ubiquitination of Ubext or weakening its interactions with other ubiquitin-processing proteins reduced the UPS impairment. Expression of Ubext altered the conjugation of wild-type ubiquitin to a UPS substrate. The expression of Ubext markedly enhanced cellular susceptibility to toxic protein aggregates but, surprisingly, did not induce or alter nontoxic protein aggregates in yeast. Taken together, these results suggest that Ubext interacts with more than one protein to elicit impairment of the UPS and affect protein aggregate toxicity. Furthermore, we suggest a model whereby chronic UPS impairment could inflict deleterious consequences on proper protein aggregate sequestration

Resistance to amorphisation in Ca1-xLa2x/3TiO3 perovskites – a bulk ion-irradiation study

The changes induced from 1 MeV Kr+ and 5 MeV Au+ ion irradiation at room temperature have been utilised to determine the impact of cation vacancies on the radiation damage response of bulk Ca1-xLa2x/3TiO3 perovskite structured ceramics. Perovskite systems have long been considered as candidate waste forms for the disposition of actinide wastes, and doping with multi-valent elements such as Pu may lead to cation deficiency. Based on GAXRD and TEM analysis, two regions of resistance/susceptibility to amorphisation have been confirmed with reference to CaTiO3. Increased resistance to amorphisation has been observed for 0.1 ≤ x ≤ 0.4, with an increased susceptibility to amorphisation for x ≥ 0.5. It is proposed that these processes are induced by enhanced recovery from radiation damage for 0.1 ≤ x ≤ 0.4, and reduced tolerance for disorder/the increasingly covalent nature of the A-O bond for x ≥ 0.5. Lattice parameter analysis of the x = 0 and 0.5 samples showed a saturation in radiation damage induced volume swelling at 4.7 ± 0.1% and 1.8 ± 0.1%, respectively, while the saturation limit for the b parameter was lower than the respective a and c orthorhombic parameters. In the x = 0.2 and 0.4 samples, amorphisation was not observed, however the b parameter was found to swell to a lesser extent than the a and c parameters. Swelling was not observed for the ion irradiated x ≥ 0.6 samples