Immersive front-projection analysis using a radiosity-based simulation method

International audienceVideo projectors are designed to project onto flat white diffuse screens. Over the last few years, projector-based systems have been used, in virtual reality applications, to light non-specific environments such as the walls of a room. However, in these situations, the images seen by the user are affected by several radiometric disturbances, such as interreflection. Radiometric compensa tion methods have been proposed to reduce the disturbance caused by interreflection, but nothing has been proposed for evaluating the phenomenon itself and the effectiveness of compensation methods. In this paper, we propose a radiosity-based method to simulate light transfer in immersive environments, from a projector to a camera (the camera gives the image a user would see in a real room). This enables us to evaluate the disturbances resulting from interreflection. We also consider the effectiveness of interreflection compensation and study the influence of several parameters (projected image, projection onto a small or large part of the room, reflectivity of the walls). Our results show that radiometric compensation can reduce the influence of interreflection but is severely limited if we project onto a large part of the walls around the user, or if all the walls are bright

Analyse en simulation de projection immersive par l'avant

National audienceDepuis quelques années des systèmes caméra-projecteur sont utilisés, dans le cadre de la réalité mixte, pour éclairer des environnements non dédiés comme les murs d'une pièce d'habitation. L'objectif de ce travail est de caractériser le potentiel d'un tel système. Pour cela, nous proposons une étude en simulation des échanges énergétiques, depuis le projecteur jusqu'à la caméra. Nous considérons également l'efficacité de la compensation. Enfin, nous analysons, d'après les résultats obtenus, l'influence de différents facteurs

Evaluation des risques sanitaires liés à l'injection de biogaz épure dans un réseau de gaz naturel

National audienceCe document reprend l'avis de l'Agence Française de Sécurité Sanitaire de l'Environnement et du Travail (Afsset) émis à la suite de l'expertise collective menée pour l'évaluation de risques sanitaires liés à l'injection de biogaz dans le réseau de gaz naturel. L'intégralité de cette expertise est publiée et disponible sur le site internet de l'Agence, seuls les grands axes sont présentés dans ce document. Suite aux recommandations émises par l'Afsset, des travaux ont été initiés afin de recueillir et analyser des données de composition sur le biogaz issus de boues de STEP. L'INERIS est en charge de ce projet. Par la suite, les données seront utilisées afin d'évaluer les risques accidentels (consécutifs à la valorisation du biogaz, au transport par canalisation et à la valorisation énergétique, industrielle et domestique) ; ainsi que les risques sanitaires pour les utilisateurs (consécutifs à l'injection dans le réseau de gaz naturel)

Compensation radiométrique d'un système de projection immersive grand-public

National audienceCatopsys est un système de projection immersive grand-public destiné à des applications de réalité mixte. Il est composé d'un vidéo-projecteur, d'un miroir convexe et d'une caméra, et peut être utilisé dans des salles qui n'ont pas été conçues spécifiquement pour la projection. Le système permet d'afficher un environnement immersif en projetant une image dans toute la salle. Cependant, l'environnement ainsi affiché est perturbé par la réponse du projecteur, les matériaux composant la salle et les réflexions multiples inhérentes à toute pièce partiellement close. La compensation radiométrique de la projection a pour but de réduire l'influence de ces perturbations. Dans ce papier, nous présentons notre système de projection et le processus radiométrique correspondant. Nous proposons ensuite un modèle radiométrique prenant en compte, en autres, la réponse du projecteur, les matériaux de la salle et les réflexions multiples particulièrement importantes avec notre système. Nous proposons également des méthodes de calibrage et de compensation basées sur ce modèle. Notre méthode de compensation peut être intégrée dans une application de réalité virtuelle ou mixte comme un post-traitement corrigeant les perturbations radiométriques de la projection. A notre connaissance, nos méthodes sont les premières à prendre en compte à la fois les réflexions multiples et la non-linéarité du projecteur

Practical photoquantity measurement using a camera

International audienceAn image output by a camera is generally not a faithful representation of the real scene, because it undergoes a series of radiometric disturbances during the imaging process. This paper proposes a method for obtaining a more accurate measure of the light seen by a camera. Our method requires no specific calibration apparatus and only minimal supervision. Nevertheless, it is quite comprehensive, since it accounts for response function, exposure, vignetting, spatial non-uniformity of the sensor and colour balancing. Our method works in two steps. First, the camera is calibrated off-line, in a photoquantity sense. Then, the photoquantity of any scene can be estimated in-line. Our method is therefore geared to a wide range of computer vision applications where a camera is expected to give a measurement of the visible light. The paper starts by presenting a photoquantity model of the camera imaging process. It then describes the key steps of calibration and correction method. Finally, results are given and analyzed to evaluate the relevance of our approach

Radiometric compensation for a low-cost immersive projection system

International audienceCatopsys is a low-cost projection system aiming at making mixed reality (virtual, augmented or diminished reality) affordable. It combines a videoprojector, a camera and a convex mirror and works in a non-specific room. This system displays an immersive environment by projecting an image onto the different parts of the room. However, the presence of an uncalibrated projector, heterogeneous materials and light inter-reflections influence the colors of the environment displayed in the room. Radiometric compensation of the projection process enables the system to reduce this problem. In this paper, we present our low-cost immersive projection system and propose a radiometric model and a compensation method which handle the projector response, surface materials and inter-reflections between surfaces. Our method works in two stages. First, the radiometric response of the projection process is evaluated. Then, this radiometric response is used to compensate the projection process in the desired environments

VOCs and formaldehyde emissions from cleaning products and air fresheners

International audienceHuman indoor exposure to Volatile Organic Compounds (VOCs) may be associated with the use of household products. However little is known about their emissions and to what extent they contribute to indoor air pollution. The French Agency for Environmental and Occupational Health Safety (Afsset) conducted tests in order to characterize VOCs emissions from 32 consumer products: air fresheners, glass cleaners, furniture polishes, toilet products, carpet and floor cleaning products. All experiments were conducted by the Scientific and Technical Centre for Building (CSTB) in realistic conditions of use (in emission test chamber or in an experimental house). Results show that the use of consumer products can lead to high indoor VOCs concentrations. Some of them are toxic airborne contaminants. The link between formaldehyde emissions and product compositions is discussed. Finally, formaldehyde concentrations are compared to the indoor air quality guideline value proposed by Afsse

France, Spain and Belgium

Funding Information: Our thanks to FCT / MCTES for the financial support to CESAM (UIDP/50017/2020+UIDB/50017/2020), through national funds. Funding Information: The authors received funding from the EU Horizon2020 Framework Project, HBM4EU, Grant number 733032 . Publisher Copyright: © 2021 The AuthorsCadmium (Cd) is a toxic heavy metal widespread in the environment leading to human exposure in particular through diet (when smoking is excluded), as documented by recent human biomonitoring (HBM) surveys. Exposure to Cd at environmental low-exposure levels has been associated with adverse effects such as renal toxicity and more recently bone effects. The implication, even if limited, of Cd in the etiology of osteoporosis can be of high importance at the population level given the significant prevalence of osteoporosis and the ubiquitous and life-long exposure to Cd. Therefore, the osteoporosis cases attributable to Cd exposure was estimated in three European countries (Belgium, France and Spain), based on measured urinary Cd levels from HBM studies conducted in these countries. The targeted population was women over 55 years old, for which risk levels associated with environmental Cd exposure were available. Around 23% of the cases were attributed to Cd exposure. Moreover, in a prospective simulation approach of lifelong urinary Cd concentrations assuming different intakes scenarios, future osteoporosis attributable cases were calculated, based on urinary Cd levels measured in women aged under 55. Between 6 and 34% of the considered populations under 55 years were at risk for osteoporosis. Finally, the costs associated to the burden of osteoporosis-related fractures attributable to Cd for each country targeted in this paper were assessed, standing for a major contributing role of Cd exposure in the overall social costs related to osteoporosis. Absolute costs ranged between 0.12 (low estimate in Belgium) and 2.6 billion Euros (high estimate in France) in women currently over 55 years old and at risk for fractures. Our results support the importance of reducing exposure of the general population to Cd.publishersversionpublishe

How To Make A Pie: Reproducible Research for Empirical Economics & Econometrics

Empirical economics and econometrics (EEE) research now relies primarily on the application of code to datasets. Handling the workflow linking datasets, programs, results and finally manuscript(s) is essential if one wish to reproduce results, which is now increasingly required by journals and institutions. We underline here the importance of “reproducible research” in EEE and suggest three simple principles to follow. We illustrate these principles with good habits and tools, with particular focus on their implementation in most popular software and languages in applied economics