1,142 research outputs found
Coronal heating in multiple magnetic threads
Context. Heating the solar corona to several million degrees requires the
conversion of magnetic energy into thermal energy. In this paper, we
investigate whether an unstable magnetic thread within a coronal loop can
destabilise a neighbouring magnetic thread. Aims. By running a series of
simulations, we aim to understand under what conditions the destabilisation of
a single magnetic thread can also trigger a release of energy in a nearby
thread. Methods. The 3D magnetohydrodynamics code, Lare3d, is used to simulate
the temporal evolution of coronal magnetic fields during a kink instability and
the subsequent relaxation process. We assume that a coronal magnetic loop
consists of non-potential magnetic threads that are initially in an equilibrium
state. Results. The non-linear kink instability in one magnetic thread forms a
helical current sheet and initiates magnetic reconnection. The current sheet
fragments, and magnetic energy is released throughout that thread. We find
that, under certain conditions, this event can destabilise a nearby thread,
which is a necessary requirement for starting an avalanche of energy release in
magnetic threads. Conclusions. It is possible to initiate an energy release in
a nearby, non-potential magnetic thread, because the energy released from one
unstable magnetic thread can trigger energy release in nearby threads, provided
that the nearby structures are close to marginal stability
Recommended from our members
Predictions of the arrival time of coronal mass ejections at 1AU: an analysis of the causes of errors
Three existing models of Interplanetary Coronal
Mass Ejection (ICME) transit between the Sun and the Earth
are compared to coronagraph and in situ observations: all
three models are found to perform with a similar level of
accuracy (i.e. an average error between observed and predicted 1AU transit times of approximately 11 h). To improve long-term space weather prediction, factors influencing CME transit are investigated. Both the removal of the plane of sky projection (as suffered by coronagraph derived speeds of Earth directed CMEs) and the use of observed values of solar wind speed, fail to significantly improve transit time prediction. However, a correlation is found to exist between the late/early arrival of an ICME and the width of the preceding sheath region, suggesting that the error is a geometrical effect that can only be removed by a more accurate determination of a CME trajectory and expansion. The correlation between magnetic field intensity and speed of ejecta at 1AU is also investigated. It is found to be weak in the body of the
ICME, but strong in the sheath, if the upstream solar wind
conditions are taken into account
Highly Efficient Modeling of Dynamic Coronal Loops
Observational and theoretical evidence suggests that coronal heating is
impulsive and occurs on very small cross-field spatial scales. A single coronal
loop could contain a hundred or more individual strands that are heated
quasi-independently by nanoflares. It is therefore an enormous undertaking to
model an entire active region or the global corona. Three-dimensional MHD codes
have inadequate spatial resolution, and 1D hydro codes are too slow to simulate
the many thousands of elemental strands that must be treated in a reasonable
representation. Fortunately, thermal conduction and flows tend to smooth out
plasma gradients along the magnetic field, so "0D models" are an acceptable
alternative. We have developed a highly efficient model called Enthalpy-Based
Thermal Evolution of Loops (EBTEL) that accurately describes the evolution of
the average temperature, pressure, and density along a coronal strand. It
improves significantly upon earlier models of this type--in accuracy,
flexibility, and capability. It treats both slowly varying and highly impulsive
coronal heating; it provides the differential emission measure distribution,
DEM(T), at the transition region footpoints; and there are options for heat
flux saturation and nonthermal electron beam heating. EBTEL gives excellent
agreement with far more sophisticated 1D hydro simulations despite using four
orders of magnitude less computing time. It promises to be a powerful new tool
for solar and stellar studies.Comment: 34 pages, 8 figures, accepted by Astrophysical Journal (minor
revisions of original submitted version
Modelling interplanetary CMEs using magnetohydrodynamic simulations
International audienceThe dynamics of Interplanetary Coronal Mass Ejections (ICMEs) are discussed from the viewpoint of numerical modelling. Hydrodynamic models are shown to give a good zero-order picture of the plasma properties of ICMEs, but they cannot model the important magnetic field effects. Results from MHD simulations are shown for a number of cases of interest. It is demonstrated that the strong interaction of the ICME with the solar wind leads to the ICME and solar wind velocities being close to each other at 1 AU, despite their having very different speeds near the Sun. It is also pointed out that this interaction leads to a distortion of the ICME geometry, making cylindrical symmetry a dubious assumption for the CME field at 1 AU. In the presence of a significant solar wind magnetic field, the magnetic fields of the ICME and solar wind can reconnect with each other, leading to an ICME that has solar wind-like field lines. This effect is especially important when an ICME with the right sense of rotation propagates down the heliospheric current sheet. It is also noted that a lack of knowledge of the coronal magnetic field makes such simulations of little use in space weather forecasts that require knowledge of the ICME magnetic field strength
Recommended from our members
Non-radial solar wind flows induced by the motion of interplanetary coronal mass ejections
A survey of the non-radial flows (NRFs) during
nearly five years of interplanetary observations revealed
the average non-radial speed of the solar wind flows to
be �30 km/s, with approximately one-half of the large
(>100 km/s) NRFs associated with ICMEs. Conversely, the
average non-radial flow speed upstream of all ICMEs is
�100 km/s, with just over one-third preceded by large NRFs.
These upstream flow deflections are analysed in the context
of the large-scale structure of the driving ICME. We chose
5 magnetic clouds with relatively uncomplicated upstream
flow deflections. Using variance analysis it was possible to
infer the local axis orientation, and to qualitatively estimate the point of interception of the spacecraft with the ICME. For all 5 events the observed upstream flows were in agreement with the point of interception predicted by variance analysis. Thus we conclude that the upstream flow deflections in these events are in accord with the current concept of the large scale structure of an ICME: a curved axial loop connected to the Sun, bounded by a curved (though not necessarily circular)cross section
First Cluster results of the magnetic field structure of the mid- and high-altitude cusps
International audienceMagnetic field measurements from the four Cluster spacecraft from the mid- and high-altitude cusp are presented. Cluster underwent two encounters with the mid-altitude cusp during its commissioning phase (24 August 2000). Evidence for field-aligned currents (FACs) was seen in the data from all three operating spacecraft from northern and southern cusps. The extent of the FACs was of the order of 1 RE in the X-direction, and at least 300 km in the Y-direction. However, fine-scale field structures with scales of the order of the spacecraft separation (300 km) were observed within the FACs. In the northern crossing, two of the spacecraft appeared to lie along the same magnetic field line, and observed very well matched signals. However, the third spacecraft showed evidence for structuring transverse to the field on scales of a few hundred km. A crossing of the high-altitude cusp from 13 February 2001 is presented. It is revealed to be a highly dynamic structure with the boundaries moving with velocities ranging from a few km/s to tens of km/s, and having structure on timescales ranging from less than one minute up to several minutes. The cusp proper is associated with the presence of a very disordered magnetic field, which is entirely different from the magnetosheath turbulence
Inference of heating properties from "hot" non-flaring plasmas in active region cores. I. Single nanoflares
The properties that are expected of “hot” non-flaring plasmas due to nanoflare heating in active regions are investigated using hydrodynamic modeling tools, including a two-fluid development of the Enthalpy Based Thermal Evolution of Loops code. Here we study a single nanoflare and show that while simple models predict an emission measure distribution extending well above 10 MK, which is consistent with cooling by thermal conduction, many other effects are likely to limit the existence and detectability of such plasmas. These include: differential heating between electrons and ions, ionization non-equilibrium, and for short nanoflares, the time taken for the coronal density to increase. The most useful temperature range to look for this plasma, often called the “smoking gun” of nanoflare heating, lies between 10 6.6 and 10 7 K. Signatures of the actual heating may be detectable in some instances.Publisher PDFPeer reviewe
Enthalpy-Based Thermal Evolution of Loops: III. Comparison of Zero-Dimensional Models
Zero dimensional (0D) hydrodynamic models, provide a simple and quick way to study the thermal evolution of coronal loops subjected to time-dependent heating. This paper presents a comparison of a number of 0D models that have been published in the past and is intended to provide a guide for those interested in either using the old models or developing new ones. The principal difference between the models is the way the exchange of mass and energy between corona, transition region and chromosphere is treated, as plasma cycles into and out of a loop during a heating-cooling cycle. It is shown that models based on the principles of mass and energy conservation can give satisfactory results at some, or, in the case of the Enthalpy Based Thermal Evolution of Loops (EBTEL) model, all stages of the loop evolution. Empirical models can lead to low coronal densities, spurious delays between the peak density and temperature, and, for short heating pulses, overly short loop lifetimes
Dynamical processes in the solar atmosphere
It has become clear that the closed-field regions of the solar atmosphere are not static (as was once thought) but that many types of steady and unsteady flows and other dynamical, processes such as flares are continually occurring, in them. This thesis investigates some theoretical aspects of these dynamical phenomena. Steady, one-dimensional flow along a coronal loop is investigated first of all. Such a flow may be driven by a pressure difference between the foot points, and a wide range of shocked and unshocked flows are found. The presence of steady flows removes the symmetry present in most static loop models, and these models are shown to form only one class of a much wider range of dynamic solutions to the equations of motion. Thermal non-equilibrium in hot coronal loops occurs if the pressure in a loop becomes too big. The non-linear evolution of this non-equilibrium state is followed, and the loop is found to cool from of order 10[super]6 K to below 10[super]5 K in a few hours. An upflow is driven, and non-equilibrium is suggested as a means of formation of either cool loop cores or prominences. Thermal non-equilibrium is also discussed as a possible mechanism for the simple-loop flare. It is suggested that a cool equilibrium at a temperature of a few times 10[super]4 K can flare to over. 10[super]7 K if the mechanical heating in the cool loop becomes too large. The evolution is followed and the loop is found to flare to over 10[super]7 K in approximately 5 minutes. Magnetohydrodynamic shock waves have long been regarded as a potentially efficient heating mechanism. Their behaviour is re-examined here, and it is found that certain types of shock can release very large amounts of energy. These results are then applied to the heating of "post"-flare loops, for which temperatures of 10[super]7 K at the loop summit may be obtained. Finally, some solutions of the magnetostatic equation are discussed, and it is pointed out that if the gas pressure is too big then magnetostatic equilibrium will break down. It is suggested that the subsequent evolution may give rise to a surge or other mass ejection
- …