2,687 research outputs found
Modification of the Douglas Neumann program to improve the efficiency of predicting component interference and high lift characteristics
The Douglas Neumann method for low-speed potential flow on arbitrary three-dimensional lifting bodies was modified by substituting the combined source and doublet surface paneling based on Green's identity for the original source panels. Numerical studies show improved accuracy and stability for thin lifting surfaces, permitting reduced panel number for high-lift devices and supercritical airfoil sections. The accuracy of flow in concave corners is improved. A method of airfoil section design for a given pressure distribution, based on Green's identity, was demonstrated. The program uses panels on the body surface with constant source strength and parabolic distribution of doublet strength, and a doublet sheet on the wake. The program is written for the CDC CYBER 175 computer. Results of calculations are presented for isolated bodies, wings, wing-body combinations, and internal flow
Aircraft aerodynamic prediction method for V/STOL transition including flow separation
A numerical procedure was developed for the aerodynamic force and moment analysis of V/STOL aircraft operating in the transition regime between hover and conventional forward flight. The trajectories, cross sectional area variations, and mass entrainment rates of the jets are calculated by the Adler-Baron Jet-in-Crossflow Program. The inviscid effects of the interaction between the jets and airframe on the aerodynamic properties are determined by use of the MCAIR 3-D Subsonic properties are determined by use of the MCAIR 3-D Subsonic Potential Flow Program, a surface panel method. In addition, the MCAIR 3-D Geometry influence Coefficient Program is used to calculate a matrix of partial derivatives that represent the rate of change of the inviscid aerodynamic properties with respect to arbitrary changes in the effective wing shape
Count three for wear able computers
This paper is a postprint of a paper submitted to and accepted for publication in the Proceedings of the IEE Eurowearable 2003 Conference, and is subject to Institution of Engineering and Technology Copyright. The copy of record is available at the IET Digital Library.
A revised version of this paper was also published in Electronics Systems and Software, also subject to Institution of Engineering and Technology Copyright. The copy of record is also available at the IET Digital Library.A description of 'ubiquitous computer' is presented. Ubiquitous computers imply portable computers embedded into everyday objects, which would replace personal computers. Ubiquitous computers can be mapped into a three-tier scheme, differentiated by processor performance and flexibility of function. The power consumption of mobile devices is one of the most important design considerations. The size of a wearable system is often a design limitation
Crop Residue Effects on Surface Radiation and Energy Balance - Review
Crop residues alter the surface properties of soils. Both shortwave albedo and longwave emissivity are affected. These are linked to an effect of residue on surface evaporation and water content. Water content influences soil physical properties and surface energy partitioning. In summary, crop residue acts to soil as clothing acts to skin. Compared to bare soil, crop residues can reduce extremes of heat and mass fluxes at the soil surface. Managing crop residues can result in more favorable agronomic soil conditions. This paper reviews research results of the quantity, quality, architecture, and surface distribution of crop residues on soil surface radiation and energy balances, soil water content, and soil temperature
Iterative Learning Control of Single Point Incremental Sheet Forming Process using Digital Image Correlation
Single Point Incremental Sheet Forming (SPIF) is a versatile forming process that has gained significant traction over the past few decades. Its increased formability, quick part adaption, and reduced set-up costs make it an economical choice for small batch and rapid prototype forming applications when compared to traditional stamping processes. However, a common problem with the SPIF process is its tendency to produce high geometric error due to the lack of supporting dies and molds. While geometric error has been a primary focus of recent research, it is still significantly larger for SPIF than traditional forming processes. In this paper, the convergence behavior and the ability to reduce geometric error using a simple Iterative Learning Control (ILC) algorithm is studied with two different forming methods. For both methods a tool path for the desired reference geometry is generated and a part is formed. A Digital Image Correlation (DIC) system takes a measurement and the geometric error along the tool path is calculated. The ILC algorithm then uses the geometric error to alter the tool path for the next forming iteration. The first method, the Single Sheet Forming (SSF) method, performs each iteration on the same sheet. The second method, the Multi Sheet Forming (MSF) method, performs each iteration on a newly replaced sheet. Multiple experiments proved the capability of each method at reducing geometric error. It was concluded that using the MSF method allows for negative corrections to the forming part and, therefore, leads to better final part accuracy. However, this method is less cost effective and more time consuming than using the standard SSF methodology. In addition, it was found that in order to effectively correct a part with an ILC algorithm, steps must be taken to increase the controllability of the part geometry
Analysis of Geometric Accuracy and Thickness Reduction in Multistage Incremental Sheet Forming using Digital Image Correlation
Incremental Sheet Forming (ISF) is a freeform manufacturing method whereby a 3D geometry is created by progressively deforming a metal sheet with a single point tool following a defined trajectory. The thickness distribution of a formed part is a major consideration of the process and is believed to be improved by forming the geometry in multiple stages. This paper describes a series of experiments in which truncated cone geometries were formed using two multistage methods and compared to the same geometry formed using the traditional single stage method. The geometric accuracy and thickness distributions, including 3D thickness distribution plots, of each are examined using digital image correlation (DIC). The data collected indicate that multistage forming, compared to single stage forming, has a significant effect on the geometric accuracy of the processed sheets. Moreover, the results of the experiments conducted in this paper show that sheets processed with multistage forming do not have a uniform sheet thickness reduction, rather they have a parabolic-like thickness distribution in the processed region
Application of Wavelet Analysis on Transient Rlectivity in Ultra-thin Films
Applications of wavelet analysis in ultra-thin film transient reflectivity (TR) measurements have been investigated. Advantages of utilizing different localized wavelet bases, in position and time, have been addressed on the residual TR signals. Morse wavelets have been used to obtain information from the abrupt oscillatory modes in the signal, which are not distinguishable with conventional methods such as Fourier transforms. These abrupt oscillatory modes are caused by the surface, interface, or any short-lived oscillatory modes which are suppressed in the TR signal in ultra-thin films. It is demonstrated that by choosing different Morse wavelets, information regarding different oscillatory modes in the TR signal of a heterostructure thin film is achievable. Moreover, by performing wavelet analysis on multiferroic heterostructures, oscillatory modes with very close energy ranges are easily distinguishable. For illustration, residuals of the TR signals have been obtained by a pumpprobe setup in reflectivity mode on La0.7Sr0.3MnO3/SrTiO3 and BaTiO3/La0.7Sr0.3MnO3/SrTiO3 samples, where sufficient signal to noise ratios have been achieved by taking multiple scans. The residual signals have been analyzed with Morse wavelets, and multiple oscillatory modes with close energy ranges have been observed and distinguished. This approach can isolate the location of various oscillatory modes at the surface, interface and in the bulk of the heterostructure sample
α1Proteinase Inhibitor Regulates CD4+ Lymphocyte Levels and Is Rate Limiting in HIV-1 Disease
Background: The regulation of adult stem cell migration through human hematopoietic tissue involves the chemokine CXCL12 (SDF-1) and its receptor CXCR4 (CD184). In addition, human leukocyte elastase (HLE) plays a key role. When HLE is located on the cell surface (HLE CS), it acts not as a proteinase, but as a receptor for a 1proteinase inhibitor (a 1PI, a 1antitrypsin, SerpinA1). Binding of a1PI to HLECS forms a motogenic complex. We previously demonstrated that a1PI deficiency attends HIV-1 disease and that a1PI augmentation produces increased numbers of immunocompetent circulating CD4 + lymphocytes. Herein we investigated the mechanism underlying the a 1PI deficiency that attends HIV-1 infection. Methods and Findings: Active a 1PI in HIV-1 subjects (median 17 mM, n = 35) was significantly below normal (median 36 mM, p,0.001, n = 30). In HIV-1 uninfected subjects, CD4 + lymphocytes were correlated with the combined factors a1PI, HLECS + lymphocytes, and CXCR4 + lymphocytes (r 2 = 0.91, p,0.001, n = 30), but not CXCL12. In contrast, in HIV-1 subjects with.220 CD4 cells/ml, CD4 + lymphocytes were correlated solely with active a 1PI (r 2 =0.93,p,0.0001, n = 26). The monoclonal anti-HIV-1 gp120 antibody 3F5 present in HIV-1 patient blood is shown to bind and inactivate human a 1PI. Chimpanzee a 1PI differs from human a1PI by a single amino acid within the 3F5-binding epitope. Unlike human a1PI, chimpanzee a1PI did not bind 3F5 or become depleted following HIV-1 challenge, consistent with the normal CD4 + lymphocyte levels and benign syndrome of HIV-1 infected chimpanzees. The presence of IgG-a 1PI immune complexes correlated with decreased CD4 + lymphocytes in HIV-1 subjects
An appropriate tool for entrepreneurial learning in SMEs? The case of the 20Twenty Leadership Programme
The 20Twenty Leadership Programme was developed by Cardiff Metropolitan University as an executive education programme to be delivered within South Wales to small businesses. It is funded by the European Social Fund (ESF) and administered by the Welsh European Funding Office and has the key aim of developing SMEâs growth potential via a range of leadership and management skills, including a focus on âsoftâ skills. The focus of this paper is to place the 20Twenty Leadership Programme within the wider context of entrepreneurship policy and SME training initiatives in particular, and then to examine the rationale and delivery methods of the Programme in relation to these. It also reflects on the Programmeâs success (or otherwise) to date where possible. Finally, the paper seeks to suggest fruitful areas of further research both in terms of the 20Twenty Leadership Programme itself, but also with regard to evaluation in relation to other parallel programmes, and to SME training initiatives more generally
Mineralogy of Vera Rubin Ridge in Gale Crater from the Mars Science Laboratory CheMin instrument
Gale crater was selected as the landing site for the Mars Science Laboratory Curiosity rover because of orbital evidence for a variety of secondary minerals in the lower slopes of Aeolis Mons (aka Mount Sharp) that indicate changes in aqueous conditions over time. Distinct units demonstrate orbital spectral signatures of hematite, phyllosilicate (smectite), and sulfate minerals, which suggest that ancient aqueous environments in Gale crater varied in oxidation potential, pH, and water activity. Vera Rubin ridge (VRR) is the first of these units identified from orbit to have been studied by Curiosity. Orbital near-infrared data from VRR show a strong band at 860 nm indicative of hematite. Before Curiosity arrived at VRR, the hypotheses to explain the formation of hematite included (1) precipitation at a redox interface where aqueous Fe2+ was oxidized to Fe3+, and (2) acidic alteration of olivine in oxic fluids. Studying the composition and sedimentology of the rocks on VRR allow us to test and refine these hypotheses and flesh out the depositional and diagenetic history of the ridge. Here, we focus on the mineralogical results of four rock powders drilled from and immediately below VRR as determined by CheMin
- âŠ