Considerations of electron beam propagation from space vehicles

Theoretical analysis of electron beam array propagation from spacecraf

Electron accelerator for Aerobee 350 rocket - Description, development and flight performance Final report

Aerobee-borne electron accelerators for ejecting electron beams into upper atmospher

Radiation testing of composite materials, in situ versus ex situ effects

The effect of post irradiation test environments on tensile properties of representative advanced composite materials (T300/5208, T300/934, C6000/P1700) was investigated. Four ply (+ or - 45 deg/+ or - 45 deg) laminate tensile specimens were exposed in vacuum up to a bulk dose of 1 x 10 to the 10th power rads using a mono-energetic fluence of 700 keV electrons from a Van de Graaff accelerator. Post irradiation testing was performed while specimens were being irradiated (in situ data), in vacuum after cessation of irradiation (in vacuo data), and after exposure to air (ex situ data). Room temperature and elevated temperature effects were evaluated. The radiation induced changes to the tensile properties were small. Since the absolute changes in tensile properties were small, the existance of a post irradiation test environment effect was indeterminate

Carbon fiber plume sampling for large scale fire tests at Dugway Proving Ground

Carbon fiber sampling instruments were developed: passive collectors made of sticky bridal veil mesh, and active instruments using a light emitting diode (LED) source. These instruments measured the number or number rate of carbon fibers released from carbon/graphite composite material when the material was burned in a 10.7 m (35 ft) dia JP-4 pool fire for approximately 20 minutes. The instruments were placed in an array suspended from a 305 m by 305 m (1000 ft by 1000 ft) Jacob's Ladder net held vertically aloft by balloons and oriented crosswind approximately 140 meters downwind of the pool fire. Three tests were conducted during which released carbon fiber data were acquired. These data were reduced and analyzed to obtain the characteristics of the released fibers including their spatial and size distributions and estimates of the number and total mass of fibers released. The results of the data analyses showed that 2.5 to 3.5 x 10 to the 8th power single carbon fibers were released during the 20 minute burn of 30 to 50 kg mass of initial, unburned carbon fiber material. The mass released as single carbon fibers was estimated to be between 0.1 and 0.2% of the initial, unburned fiber mass

Event-driven simulations of a plastic, spiking neural network

We consider a fully-connected network of leaky integrate-and-fire neurons with spike-timing-dependent plasticity. The plasticity is controlled by a parameter representing the expected weight of a synapse between neurons that are firing randomly with the same mean frequency. For low values of the plasticity parameter, the activities of the system are dominated by noise, while large values of the plasticity parameter lead to self-sustaining activity in the network. We perform event-driven simulations on finite-size networks with up to 128 neurons to find the stationary synaptic weight conformations for different values of the plasticity parameter. In both the low and high activity regimes, the synaptic weights are narrowly distributed around the plasticity parameter value consistent with the predictions of mean-field theory. However, the distribution broadens in the transition region between the two regimes, representing emergent network structures. Using a pseudophysical approach for visualization, we show that the emergent structures are of "path" or "hub" type, observed at different values of the plasticity parameter in the transition region.Comment: 9 pages, 6 figure

Insulation bonding test system

A method and a system for testing the bonding of foam insulation attached to metal is described. The system involves the use of an impacter which has a calibrated load cell mounted on a plunger and a hammer head mounted on the end of the plunger. When the impacter strikes the insulation at a point to be tested, the load cell measures the force of the impact and the precise time interval during which the hammer head is in contact with the insulation. This information is transmitted as an electrical signal to a load cell amplifier where the signal is conditioned and then transmitted to a fast Fourier transform (FFT) analyzer. The FFT analyzer produces energy spectral density curves which are displayed on a video screen. The termination frequency of the energy spectral density curve may be compared with a predetermined empirical scale to determine whether a igh quality bond, good bond, or debond is present at the point of impact

Does the 1/f frequency-scaling of brain signals reflect self-organized critical states?

Many complex systems display self-organized critical states characterized by 1/f frequency scaling of power spectra. Global variables such as the electroencephalogram, scale as 1/f, which could be the sign of self-organized critical states in neuronal activity. By analyzing simultaneous recordings of global and neuronal activities, we confirm the 1/f scaling of global variables for selected frequency bands, but show that neuronal activity is not consistent with critical states. We propose a model of 1/f scaling which does not rely on critical states, and which is testable experimentally.Comment: 3 figures, 6 page

Web-based multimodal graphs for visually impaired people

This paper describes the development and evaluation of Web-based multimodal graphs designed for visually impaired and blind people. The information in the graphs is conveyed to visually impaired people through haptic and audio channels. The motivation of this work is to address problems faced by visually impaired people in accessing graphical information on the Internet, particularly the common types of graphs for data visualization. In our work, line graphs, bar charts and pie charts are accessible through a force feedback device, the Logitech WingMan Force Feedback Mouse. Pre-recorded sound files are used to represent graph contents to users. In order to test the usability of the developed Web graphs, an evaluation was conducted with bar charts as the experimental platform. The results showed that the participants could successfully use the haptic and audio features to extract information from the Web graphs

Internal Jugular Vein Cross-Sectional Area Enlargement Is Associated with Aging in Healthy Individuals.

Internal jugular vein (IJV) narrowing has been implicated in central nervous system pathologies, however normal physiological age- and gender-related IJV variance in healthy individuals (HIs) has not been adequately assessed.We assessed the relationship between IJV cross-sectional area (CSA) and aging.This study involved 193 HIs (63 males and 130 females) who received 2-dimensional magnetic resonance venography at 3T. The minimum CSA of the IJVs at cervical levels C2/C3, C4, C5/C6, and C7/T1 was obtained using a semi-automated contouring-thresholding technique. Subjects were grouped by decade. Pearson and partial correlation (controlled for cardiovascular risk factors, including hypertension, heart disease, smoking and body mass index) and analysis of variance analyses were used, with paired t-tests comparing side differences.Mean right IJV CSA ranges were: in males, 41.6 mm2 (C2/C3) to 82.0 mm2 (C7/T1); in females, 38.0 mm2 (C2/C3) to 62.3 mm2 (C7/T1), while the equivalent left side ranges were: in males, 28.0 mm2 (C2/C3) to 52.2 mm2 (C7/T1); in females, 27.2 mm2 (C2/C3) to 47.8 mm2 (C7/T1). The CSA of the right IJVs was significantly larger (p<0.001) than the left at all cervical levels. Controlling for cardiovascular risk factors, the correlation between age and IJV CSA was more robust in males than in the females for all cervical levels.In HIs age, gender, hand side and cervical location all affect IJV CSA. These findings suggest that any definition of IJV stenosis needs to account for these factors