Coexistence of Two Kinds of Fluorinated Hydrogenated Micelles as Building Blocks for the Design of Bimodal Mesoporous Silica with Two Ordered Mesopore Networks

A simple and effective route has been developed for the synthesis of bimodal (3.6 and 9.4 nm) mesoporous silica materials that have two ordered interconnected pore networks. Mesostructures have been prepared through the self assembly mechanism by using a mixture of polyoxyethylene fluoroalkyl ether and triblock copolymer as building block. The investigation of the RF8(EO)9/P123/water phase diagram evidences that in the considered surfactant range of concentrations, the system is micellar (L1). DLS measurements indicate that this micellar phase is composed of two types of micelles, the size of the first one at around 7.6 nm corresponds unambiguously to the pure fluorinated micelles. The second type of micelles at higher diameter consists of fluorinated micelles which have accommodated a weak fraction of P123 molecules. Thus, in this study the bimodal mesoporous silica are really templated by two kinds of micelles

Tailored Jeffamine molecular tools for ordering mesoporous Silica

Herein, we report the formation of organized mesoporous silica materials prepared from a novel nonionic gemini surfactant, myristoyl-end capped Jeffamine, synthesized from a polyoxyalkyleneamine (ED900). The behavior of the modified Jeffamine in water was first investigated. A direct micellar phase (L1) and a hexagonal (H1) liquid crystal were found. The structure of the micelles was investigated from the SAXS and the analysis by Generalized Indirect Fourier Transformation (GIFT), which show that the particles are globular of coreshell type. The myristoyl chains, located at the ends of the amphiphile molecule are assembled to form the core of the micelles and, as a consequence, the molecules are folded over on themselves. Mesoporous materials were then synthesized from the self-assembly mechanism. The recovered materials were characterized by SAXS measurements, nitrogen adsorptiondesorption analysis, transmission and scanning electron microscopy. The results clearly evidence that by modifying the synthesis parameters, such as the surfactant/silica precursor molar ratio and the hydrothermal conditions, one can control the size and the nanostructuring of the resulting material. It was observed that, the lower the temperature of the hydrothermal treatment, the better the mesopore ordering

Solubilization of decane into gemini surfactant with a modified Jeffamine backbone: Design of hierarchical porous silica

Herein, we have investigated the solubilization of decane into a novel nonionic gemini surfactant, myristoyl-end capped Jeffamine, synthesized from a polyoxyalkyleneamine (ED900). Starting from this system, porous silica materials have been prepared. Performing the hydrothermal treatment at low temperature, a slight increase of the mesopore diameter is observed in the presence of decane. Increasing the temperature of the hydrothermal treatment, no swelling effect of decane is detected. By contrast, the pore diameter decreases but better mesopore homogeneity and a larger wall thickness are obtained. At high decane concentration the new myristoyl-end capped Jeffamine/decane/water system forms oil-in-water emulsions, which are used as template for the formation of hierarchical porous silica materials

HDS of 4,6-dimethyldibenzothiophene over CoMoS supported mesoporous SiO2-TiO2 materials

TiO2 supported SBA-15 (xTi@SBA-15) materials with various high TiO2 loadings (x = 25, 50 and 70 wt%) have been used as support for impregnation of CoMo active phase for the hydrodesulfurization (HDS) of 4,6-dimethyldibenzothiophene (46DMDBT) as model molecule representative of gazole cuts. Compared to CoMoS supported over pure commercial TiO2 and conventional Al2O3, a higher total activity was measured corresponding to the presence of isomerization and dismutation reactions due to Brönsted acidity of TiO2. However, the HDS activity remains higher using alumina as support. Moreover, the DDS pathway was found favored to the HYD one with sulfided CoMo supported over xTi@SBA-15 catalysts contrary with alumina as support

Deficits of psychomotor and mnesic functions across aging in mouse lemur primates.

Owing to a similar cerebral neuro-anatomy, non-human primates are viewed as the most valid models for understanding cognitive deficits. This study evaluated psychomotor and mnesic functions of 41 young to old mouse lemurs (Microcebus murinus). Psychomotor capacities and anxiety-related behaviors decreased abruptly from middle to late adulthood. However, mnesic functions were not affected in the same way with increasing age. While results of the spontaneous alternation task point to a progressive and widespread age-related decline of spatial working memory, both spatial reference and novel object recognition (NOR) memory tasks did not reveal any tendency due to large inter-individual variability in the middle-aged and old animals. Indeed, some of the aged animals performed as well as younger ones, whereas some others had bad performances in the Barnes maze and in the object recognition test. Hierarchical cluster analysis revealed that declarative-like memory was strongly impaired only in 7 out of 25 middle-aged/old animals. These results suggest that this analysis allows to distinguish elder populations of good and bad performers in this non-human primate model and to closely compare this to human aging.journal article20142015 01 09importe

Late Pleistocene mammalian assemblages of Southeast Asia: New dating, mortality profiles and evolution of the predator-prey relationships in an environmental context

Karstic sites have great potential for yielding data regarding changes in faunal communities in the Pleistocene of Southeast Asia. In this region, the majority of fossil-bearing deposits are karstic breccias, which generally demonstrate a complicated sedimentary history. While most of the mammalian assemblages recovered in these deposits are only composed of isolated teeth, their study remains essential for reconstructing paleoecology and paleoclimatology of the region. We analyzed the assemblages recovered in three mainland and two insular karstic sites: Tam Hang South and Nam Lot in northern Laos, Duoi U'Oi in northern Vietnam, Punung in central Java and Sibrambang in western Sumatra and obtained new chronologies for three of these sites so that their significance could be discussed within their correct chronological context. The resulting age ranges place the sites in MIS5 and M1S4. The comparative analysis of the faunas, in terms of taphonomy, taxonomic diversity and abundance, and mortality profiles (Cervus unicolor, Sus scrofa, Sus vittatus, rhinocerotids and Tapirus indicus), reveals marked differences in prey-predators (carnivores and/or humans) relationships in relation to habitat. The study of homininesbearing sites (Punung, Nam Lot, Duoi U'Oi) allows us to emphasize different interactions with large carnivores (felids, hyaenids, canids). (C) 2015 Elsevier B.V. All rights reserved

La sculpture romaine en Occident

Cet ouvrage réunit les résultats de deux manifestations complémentaires  : d’une part, la table ronde intitulée «  Rendre à César  », organisée le mercredi 20 juin 2012, à Paris, au Musée du Louvre et, d’autre part, les «  Rencontres autour de la sculpture romaine conservée en France  » qui ont eu lieu du 18 au 20 octobre 2012 au Musée départemental Arles antique. La richesse des interventions lors de ces deux manifestations permet de restituer un ouvrage composé de trente-huit articles, répartis en trois parties et une conclusion. La première partie, en écho et en développement de la table ronde du Louvre, porte sur le portrait du «  César du Rhône  », aussi bien que sur «  Le portrait romain en Gaule  ». La deuxième partie publie cinq études autour des «  nouvelles techniques d’investigations scientifiques  » et présente l’analyse des matériaux des sculptures en pierre et en bronze, découvertes dans le Rhône à Arles, ainsi qu’une étude ethnoarchéologique sur les techniques de production du portrait. Enfin une troisième partie présente les «  découvertes récentes et les nouvelles recherches  », déclinées en seize études qui sont consacrées à des études de cas (Autun, Vaison-la-Romaine, Nîmes, Metz-Divodurum, Apt), ainsi qu’à des relectures novatrices de sculptures méconnues (Plouarzel, Langres, Avignonet-Lauragais, Vernègues, vallée de l’Ubaye, Besançon, Lyon). Robert Turcan signe la conclusion. Ainsi, «  La sculpture romaine en Occident. Nouveaux regards   » reflète la variété et l’intérêt des questionnements actuels dans ce domaine

The Athena X-ray Integral Field Unit: a consolidated design for the system requirement review of the preliminary definition phase

The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer, studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory, a versatile observatory designed to address the Hot and Energetic Universe science theme, selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), it aims to provide spatially resolved X-ray spectroscopy, with a spectral resolution of 2.5 eV (up to 7 keV) over an hexagonal field of view of 5 arc minutes (equivalent diameter). The X-IFU entered its System Requirement Review (SRR) in June 2022, at about the same time when ESA called for an overall X-IFU redesign (including the X-IFU cryostat and the cooling chain), due to an unanticipated cost overrun of Athena. In this paper, after illustrating the breakthrough capabilities of the X-IFU, we describe the instrument as presented at its SRR, browsing through all the subsystems and associated requirements. We then show the instrument budgets, with a particular emphasis on the anticipated budgets of some of its key performance parameters. Finally we briefly discuss on the ongoing key technology demonstration activities, the calibration and the activities foreseen in the X-IFU Instrument Science Center, and touch on communication and outreach activities, the consortium organisation, and finally on the life cycle assessment of X-IFU aiming at minimising the environmental footprint, associated with the development of the instrument. Thanks to the studies conducted so far on X-IFU, it is expected that along the design-to-cost exercise requested by ESA, the X-IFU will maintain flagship capabilities in spatially resolved high resolution X-ray spectroscopy, enabling most of the original X-IFU related scientific objectives of the Athena mission to be retained. (abridged).Comment: 48 pages, 29 figures, Accepted for publication in Experimental Astronomy with minor editin

The Athena X-ray Integral Field Unit: a consolidated design for the system requirement review of the preliminary definition phase

The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory. Athena is a versatile observatory designed to address the Hot and Energetic Universe science theme, as selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), X-IFU aims to provide spatially resolved X-ray spectroscopy, with a spectral resolution of 2.5 eV (up to 7 keV) over a hexagonal field of view of 5 arc minutes (equivalent diameter). The X-IFU entered its System Requirement Review (SRR) in June 2022, at about the same time when ESA called for an overall X-IFU redesign (including the X-IFU cryostat and the cooling chain), due to an unanticipated cost overrun of Athena. In this paper, after illustrating the breakthrough capabilities of the X-IFU, we describe the instrument as presented at its SRR (i.e. in the course of its preliminary definition phase, so-called B1), browsing through all the subsystems and associated requirements. We then show the instrument budgets, with a particular emphasis on the anticipated budgets of some of its key performance parameters, such as the instrument efficiency, spectral resolution, energy scale knowledge, count rate capability, non X-ray background and target of opportunity efficiency. Finally, we briefly discuss the ongoing key technology demonstration activities, the calibration and the activities foreseen in the X-IFU Instrument Science Center, touch on communication and outreach activities, the consortium organisation and the life cycle assessment of X-IFU aiming at minimising the environmental footprint, associated with the development of the instrument. Thanks to the studies conducted so far on X-IFU, it is expected that along the design-to-cost exercise requested by ESA, the X-IFU will maintain flagship capabilities in spatially resolved high resolution X-ray spectroscopy, enabling most of the original X-IFU related scientific objectives of the Athena mission to be retained. The X-IFU will be provided by an international consortium led by France, The Netherlands and Italy, with ESA member state contributions from Belgium, Czech Republic, Finland, Germany, Poland, Spain, Switzerland, with additional contributions from the United States and Japan.The French contribution to X-IFU is funded by CNES, CNRS and CEA. This work has been also supported by ASI (Italian Space Agency) through the Contract 2019-27-HH.0, and by the ESA (European Space Agency) Core Technology Program (CTP) Contract No. 4000114932/15/NL/BW and the AREMBES - ESA CTP No.4000116655/16/NL/BW. This publication is part of grant RTI2018-096686-B-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. This publication is part of grant RTI2018-096686-B-C21 and PID2020-115325GB-C31 funded by MCIN/AEI/10.13039/501100011033