7,099 research outputs found
Life cycle assessment of urban uses of biochar and case study in Uppsala, Sweden
Biochar is a material derived from biomass pyrolysis that is used in urban applications. The environmental impacts of new biochar products have however not been assessed. Here, the life cycle assessments of 5 biochar products (tree planting, green roofs, landscaping soil, charcrete, and biofilm carrier) were performed for 7 biochar supply-chains in 2 energy contexts. The biochar products were benchmarked against reference products and oxidative use of biochar for steel production. Biochar demand was then estimated, using dynamic material flow analysis, for a new city district in Uppsala, Sweden. In a decarbonised energy system and with high biochar stability, all biochar products showed better climate performance than the reference products, and most applications outperformed biomass use for decarbonising steel production. The climate benefits of using biochar ranged from - 1.4 to - 0.11 tonne CO2-eq tonne(-1) biochar in a decarbonised energy system. In other environmental impact categories, biochar products had either higher or lower impacts than the reference products, depending on biochar supply chain and material substituted, with trade-offs between sectors and impact categories. However, several use-phase effects of biochar were not included in the assessment due to knowledge limitations. In Uppsala's new district, estimated biochar demand was around 1700 m(3) year(-1) during the 25 years of construction. By 2100, 23% of this biochar accumulated in landfill, raising questions about end-of-life management of biochar-containing products. Overall, in a post-fossil economy, biochar can be a carbon dioxide removal technology with benefits, but biochar applications must be designed to maximise co-benefits
Assessing the diverse environmental effects of biochar systems: An evaluation framework
Biochar has been recognised as a carbon dioxide removal (CDR) technology. Unlike other CDR technologies, biochar is expected to deliver various valuable effects in e.g. agriculture, animal husbandry, industrial processes, remediation activities and waste management. The diversity of biochar side effects to CDR makes the systematic environmental assessment of biochar projects challenging, and to date, there is no common framework for evaluating them. Our aim is to bridge the methodology gap for evaluating biochar systems from a life-cycle perspective. Using life cycle theory, actual biochar projects, and reviews of biochar research, we propose a general description of biochar systems, an overview of biochar effects, and an evaluation framework for biochar effects. The evaluation framework was applied to a case study, the Stockholm Biochar Project. In the framework, biochar effects are classified according to life cycle stage and life cycle effect type; and the biochar?s end-of-life and the reference situations are made explicit. Three types of effects are easily included in life cycle theory: changes in biosphere exchanges, technosphere inputs, and technosphere outputs. For other effects, analysing the cause-effect chain may be helpful. Several biochar effects in agroecosystems can be modelled as future productivity increases against a reference situation. In practice, the complexity of agroecosystems can be bypassed by using empirical models. Existing biochar life cycle studies are often limited to carbon footprint calculations and quantify a limited amount of biochar effects, mainly carbon sequestration, energy displacements and fertiliser-related emissions. The methodological development in this study can be of benefit to the biochar and CDR research communities, as well as decision-makers in biochar practice and policy
Dose Planning Evaluation of Intensity-Modulated Proton Therapy (IMPT) Technique Based on In-House Dynamic Thorax Phantom
One of the drawbacks of the Intensity Modulated Radiation Therapy (IMRT) technique is that the absorbed dose in healthy tissue is relatively high. Proton beam has characteristics that can compensate for these drawbacks. The Bragg peak characteristic of a proton beam allows the administration of high radiation doses to the target organ only. Non-Small Cell Lung Cancer (NSCLC) cases are located in the vicinity of many vital organs, so radiation doses that exceed a certain limit will have a significant impact on these organs. Proton is a heavy particle that exhibits interaction patterns with tissue heterogeneity that differ from that of photon. This study aims to determine the distribution of proton beam planning doses in the NSCLC cases with the Intensity Modulated Proton Therapy (IMPT) technique and compare its effectiveness with the IMRT technique. Treatment planning was done by using TPS Eclipse on the water phantom and on the in-house thorax dynamic phantom. The water phantom planning parameters used are one field at 0° and three fields at 45°, 135°, and 225°. In this study, a single, sum, and multiple field techniques on the in-house thorax dynamic phantom were used. The evaluation was performed by calculating Conformity Index (CI), Homogeneity Index (HI), and Gradient Index (GI) parameters for each treatment planning. As a result, a bit of difference in the CI the HI values are shown between IMPT and IMRT planning. The GI values of IMPT planning are in the range between 4.15-4.53, while the GI value of IMRT is 7.89. The histogram results of the planar dose distribution show that the IMPT treatment planning provides fewer off-target organ doses than the IMRT planning. Evaluation was also carried out on the IMPT treatment planning of target organs in five areas of interest and four OAR positions. The evaluation results were then compared with the IMRT measurement data. As a result, the value of the point doses at the target organ did not differ significantly. However, the absorbed dose with the IMPT technique at four OAR positions is nearly zero, which had a large difference compared to the IMRT technique
Estimation of Power Plant Emissions with Unscented Kalman Filter
© 2008-2012 IEEE. Emissions from power plants constitute a major part of air pollution and should be adequately estimated. In this paper, we consider the problem of estimating nitrogen dioxide (NO-X ) emission of power plants by developing an inverse method to integrate satellite observations of atmospheric pollutant column concentrations with species concentrations and direct sensitivities predicted by a regional air quality model, in order to discern biases in the emissions of the pollutant precursors. Using this method, the emission fields are analyzed using a 'bottom-up' approach, with an inversion performed by an unscented Kalman filter (UKF) to improve estimation profiles from emissions inventories data for the Sydney metropolitan area. The idea is to integrate information from the original inventories with tropospheric nitrogen dioxide (NO-2) emissions estimated during one month from the air pollution model-chemical transport model, and then, for validation, to compare the resulting model with satellite retrievals from the ozone monitoring instrument (OMI) above the region. The UKF-based estimation of NO-2 emissions shows better agreement with OMI observations, implying a significant improvement in accuracy as compared with the original inventories. Therefore, the proposed method is a promising tool for estimation of air emissions in urban areas
Biochar produced from wood waste for soil remediation in Sweden: Carbon sequestration and other environmental impacts
The use of biochar to stabilize soil contaminants is emerging as a technique for remediation of contaminated soils. In this study, an environmental assessment of systems where biochar produced from wood waste with energy recovery is used for remediation of soils contaminated with polycyclic aromatic hydrocarbons (PAH) and metal(loid)s was performed. Two soil remediation options with biochar (on-and off-site) are considered and compared to landfilling. The assessment combined material and energy flow analysis (MEFA), life cycle assess-ment (LCA), and substance flow analysis (SFA). The MEFA indicated that on-site remediation can save fuel and backfill material compared to off-site remediation and landfilling. However, the net energy production by pyrol-ysis of wood waste for biochar production is 38% lower than incineration. The LCA showed that both on-site and off-site remediation with biochar performed better than landfilling in 10 of the 12 environmental impact catego-ries, with on-site remediation performing best. Remediation with biochar provided substantial reductions in cli-mate change impact in the studied context, owing to biochar carbon sequestration being up to 4.5 times larger than direct greenhouse gas emissions from the systems. The two biochar systems showed increased impacts only in ionizing radiation and fossils because of increased electricity consumption for biochar production. They also resulted in increased biomass demand to maintain energy production. The SFA indicated that leaching of PAH from the remediated soil was lower than from landfilled soil. For metal(loid)s, no straightforward conclusion could be made, as biochar had different effects on their leaching and for some elements the results were sensitive to water infiltration assumptions. Hence, the reuse of biocharremediated soils requires further evaluation, with site-specific information. Overall, in Sweden's current context, the biochar remediation technique is an environmentally promising alternative to landfilling worth investigating further.(c) 2021 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY license (http:// creativecommons.org/licenses/by/4.0/)
Reply to the Letter to the Editor: \u201cImportance of nasal secretions in the evaluation of mucosal immunity elicited by mRNA BNT162b2 COVID-19 vaccine\u201d by Francavilla B et al.: Lack of a strong oral mucosal immune response: rethinking the route of COVID-19 vaccine boost administration?
Design, synthesis and preliminary in-vitro studies of novel boronated monocarbonyl analogues of Curcumin (BMAC) for antitumor and β-amiloyd disaggregation activity
Physics Behind Precision
This document provides a writeup of contributions to the FCC-ee mini-workshop
on "Physics behind precision" held at CERN, on 2-3 February 2016.Comment: https://indico.cern.ch/event/469561
Investigation of in the full hadronic final state at CDF with a neural network approach
Abstract In this work we present the results of a neural network (NN) approach to the measurement of the t t production cross-section and top mass in the all-hadronic channel, analyzing data collected at the Collider Detector at Fermilab (CDF) experiment. We have used a hardware implementation of a feed forward neural network, TOTEM , the product of a collaboration of INFN (Istituto Nazionale Fisica Nucleare)—IRST (Istituto per la Ricerca Scientifica e Tecnologica)—University of Trento, Italy. Particular attention has been payed to the evaluation of the systematics specifically related to the NN approach. The results are consistent with those obtained at CDF by conventional data selection techniques
- …