2,169 research outputs found
Recommended from our members
Squeeze-film levitation characteristics of plates excited by piezoelectric actuators
A small mass is levitated by a vibrating plate with an arrangement of four piezoelectric actuators that generate a squeeze-film in the gap between the plate and the mass. Different arrangements of actuators and plate design are explored using simulation in order to produce better performance
A system dynamics approach to water resources and food production in the Gambia
The Gambia, a country in West African, faces an increasingly daunting situation. They do not produce enough food needed to feed the population, yet population growth remains high, and the current area of land under cultivation is approaching total arable land available. Climate changes complicate matters further as the majority of farms lack irrigation and are dependent on rainfall to provide water to their crops. The purpose of this thesis is to provide the first 1st iteration of a system dynamics model that could be useful as a tool to assist decision in the Gambia better understand long-term implications of policies before they are implemented. Contained within this thesis is the foundation of a system dynamics simulation model designed specifically for the Gambia that incorporates five interconnecting sectors: climate, population, land use, food production, and water resources. The model is demonstrated through four simulated scenarios over a 100-year period and an analysis of the long-term model behaviour of the model is provided. The simulated scenarios include the reduction in total fertility rate, increased irrigation, increase in crop yields, and extreme reduction in precipitation. The simulations unanimously show the long-term dangers posed by population growth and climate change in the Gambia
Comparison of analysis and experiment for gearbox noise
Low contact ratio spur gears were tested in the NASA gear-noise rig to study the noise radiated from the top of the gearbox. Experimental results were compared with a NASA acoustics code to validate the code for predicting transmission noise. The analytical code is based on the boundary element method (BEM) which models the gearbox top as a plate in an infinite baffle. Narrow band vibration spectra measured at 63 nodes on the gearbox top were used to produce input data for the BEM model. The BEM code predicted the total sound power based on the measured vibration. The measured sound power was obtained from an acoustic intensity scan taken near the surface of the gearbox at the same 63 nodes used for vibration measurement. Analytical and experimental results were compared at four different speeds for sound power at each of the narrow band frequencies over the range of 400 to 3200 Hz. Results are also compared for the sound power level at meshing frequency plus three sideband pairs and at selected gearbox resonant frequencies. The difference between predicted and measure sound power is typically less than 3 dB with the predicted value generally less than the measured value
Recommended from our members
Effect of stent position on flow characteristics in a cerebral aneurysm
The position of an intracranial stent in relation to the ostium of a cerebral aneurysm can
significantly affect the blood flow characteristics through the ostium and inside the aneurysm.
An idealised cerebral artery and aneurysm were simulated with a pulsatile flow. Simulation
results show that the effect on mass inflow between two stent positions is about 20%
whereas the difference in the porosity effect of the pattern at these two positions is around
3%. The remainder may be attributed to differences in flow velocity profile across the stent
into the aneurysm. The implications for clinical practice are an important consideration as the
surgeon may place the stent in any position between the two investigated and hence this will
lead to markedly different stent performance. Therefore, computational tools that take into
account the variability of stent placement will be valuable for assisting surgical planning
An Imaging Fabry-Perot System for the Robert Stobie Spectrograph on the Southern African Large Telescope
We present the design of the Fabry-Perot system of the Robert Stobie
Spectrograph on the 10-meter class Southern African Large Telescope and its
characterization as measured in the laboratory. This system provides
spectroscopic imaging at any desired wavelength spanning a bandpass 430 - 860
nm, at four different spectral resolving powers ranging from 300 to 9000. Our
laboratory tests revealed a wavelength dependence of the etalon gap and
parallelism with a maximum variation between 600 - 720 nm that arises because
of the complex structure of the broadband multi-layer dielectric coatings. We
also report an unanticipated optical effect of this multi-layer coating
structure that produces a significant, and wavelength dependent, change in the
apparent shape of the etalon plates. This change is caused by two effects: the
physical non-uniformities or thickness variations in the coating layers, and
the wavelength dependence of the phase change upon refection that can amplify
these non-uniformities. We discuss the impact of these coating effects on the
resolving power, finesse, and throughput of the system. This Fabry-Perot system
will provide a powerful tool for imaging spectroscopy on one of the world's
largest telescopes.Comment: 17 pages, 14 figures, accepted for publication in The Astronomical
Journa
Effect of surface roughness on friction behaviour of steel under boundary lubrication
The friction behaviour of grinded and polished surfaces was evaluated by using a reciprocal sliding tester under lubrication with PAO, PAO + ZnDTP and PAO + ZnDTP + MoDTC. Friction coefficients on the smooth surfaces showed higher values compared to those on the rough surfaces. For lubrication incorporating PAO and PAO + ZnDTP + MoDTC, friction coefficients on both the smoothest and the roughest surfaces decreased with sliding time. On the other hand, friction coefficients between these extremes decreased with sliding time. In this paper, the effects of surface roughness on friction behaviour are discussed
Recommended from our members
Plate actuator vibration modes for levitation
The design of an aluminium or steel plate of various thicknesses for achieving levitation of a small aluminum disk is investigated by simulation using ANSYS. Each plate design is excited by an arrangement of four hard piezoelectric actuators driven with an AC voltage, which produces a centre displacement for generating a squeeze-film in the gap between the vibrating plate and the disk. Physical experiments show levitation conditions for one of the designs
- …