Electronic characterization of supramolecular materials at the nanoscale by Conductive Atomic Force and Kelvin Probe Force microscopies

The performances of organic (opto)electronic devices strongly depend on the order at the supramolecular level. Unraveling the relationship between structural and electronic properties in nanoscale architectures is therefore key for both fundamental studies and technological applications. C-AFM and KPFM provide an immediate correlation between the morphology of a material and its electrical/electronic properties such as local conductivity and surface potential. Thus, they are unrivaled techniques offering crucial information toward the optimization of the real devices, ultimately providing an important contribution to a hot field at the cross-road between nanoscience and organic (opto)electronics. Herein we focus on the application of C-AFM and KPFM on self-assembled monolayers (SAMs), organic (semi)conducting materials for thin film transistors (TFTs) and organic blends for photovoltaics (OSCs)

Modulating the Faradic Operation of All-Printed Organic Electrochemical Transistors by Facile in Situ Modification of the Gate Electrode

Organic electrochemical transistors (OECTs) operated in the faradic regime were shown as outperforming transducers of bioelectric signals in vitro and in vivo. Fabrication by additive manufacturing techniques fosters OECTs as ideal candidates for point-of-care applications, as well as imposes limitations on the choice of materials and their processing conditions. Here, we address the question of how the response of fully printed OECTs depends on gate electrode material. Toward this end, we investigate the redox processes underlying the operation of OECTs under faradic regime, to show OECTs with carbon gate (C-gate) that exhibit no current modulation gate voltages <1.2 V. This is a hallmark that no interference with the faradic operation of the device enabled by redox processes occurs when operating C-gate OECTs in the low-voltage range as label-free biosensors for the detection of electroactive (bio)molecules. To tune the faradic response of the device, we electrodeposited Au on the carbon gate (Au-C-gate), obtaining a device that operates at lower gate voltage values than C-gate OECT. The presence of gold on the gate allowed further modification of the electrical performances by functionalization of the Au-C-gate with different self-assembled monolayers by fast potential-pulse-assisted method. Moreover, we show that the presence in the electrolyte solution of an external redox probe can be used to drive the faradic response of both C- and Au-C-gate OECTs, impacting on the gate potential window that yields effective drain current modulation. The results presented here suggest possible new strategies for controlling the faradic operation regime of OECTs sensors by chemical modification of the gate surface

Electrical release of dopamine and levodopa mediated by amphiphilic \u3b2-cyclodextrins immobilized on polycrystalline gold

Vesicles of cationic amphiphilic \u3b2-cyclodextrins have been immobilized on polycrystalline gold by exploiting the chemical affinity between their amino groups and Au atoms. The presence of cyclodextrins has been widely investigated by means of AFM, XPS, kelvin probe and electrochemical measurements. This multi-functional coating confers distinct electrochemical features such as pH-dependent behavior and partial/total blocking properties towards electro-active species. The host-guest properties of \u3b2-cyclodextrins have been successfully exploited in order to trap drugs, like dopamine and levodopa. The further release of these drugs was successfully achieved by providing specific electrical stimuli. This proof-of-concept led us to fabricate an electronic device (i.e. an organic transistor) capable of dispensing both dopamine and levodopa in aqueous solution

Rheological and physical characterization of PEDOT: PSS/graphene oxide nanocomposites for perovskite solar cells

In this work, the influence of graphene oxide (GO) doped Poly(3,4 ethylenedioxythiophene):poly (styrenesulfonate)(PEDOT:PSS) thin nanocomposite on an indium–tin-oxide (ITO) anode, as hole transport layer (HTL) in perovskite solar cells, was investigated. Different concentrations of GO were added into the PEDOT:PSS in order to enhance its conductivity. In particular, the influence of GO content on the rheological and thermal properties of Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/GO nanocomposites was initially examined. The GO filler was prepared by using modified Hummers method and dispersed into PEDOT:PSS in different quantity (ranging from 0.05 to 0.25 %wt/wt). The obtained nanocomposite solutions were analyzed by rheological characterizations in order to evaluate the influence of the GO filler on the viscosity of the PEDOT:PSS matrix. The wettability of solutions was evaluated by Contact Angle (CA) measurements. The quality of GO dispersion into the polymer matrix was studied using Scanning electron microscopy (SEM) and X-ray diffraction (XRD). Thermal characterizations (DSC and TGA) were, finally, applied on nanocomposite films in order to evaluate thermal stability of the films as well as to indirectly comprehend the GO influence on PEDOT:PSS-water links

Systematic study of the correlation between surface chemistry, conductivity and electrocatalytic properties of graphene oxide nanosheets

A main advantage of graphene oxide (GO) over other materials is the high tunability of its surface functional groups and of its electric conductivity. However, the complex chemical composition of GO renders difficult to unravel the correlation between structural and electric properties. Here, we use a combination of electron spectroscopy and electrochemistry to correlate the surface chemistry of GO to its electrical conductivity and electrocatalytic properties with respect to two molecules of high biological interest: β-nicotinamide adenine dinucleotide (NADH) and vitamin C. We demonstrate that the electrocatalytic properties of the material are due to hydroxyl, carbonyl and carboxyl groups residues that, even if already present on pristine GO, become electroactive only upon GO reduction. The results of this study demonstrate the advantages in the use of GO in amperometric biosensing and in enzymatic biofuel cells: it allows the oxidation of the target molecules at low potential values, with a sensitivity >15 times higher with respect to standard, carbon-based electrode materials. Finally, we demonstrate that the right amount of chemical groups to achieve such high performance can be obtained also by direct electrochemical exfoliation of bulk graphite, without passing through GO production, thus rendering this approach suitable for cheap, large-scale applications

Mesoscopic 3D Charge Transport in Solution-Processed Graphene-Based Thin Films: A Multiscale Analysis

Graphene and related 2D material (GRM) thin films consist of 3D assembly of billions of 2D nanosheets randomly distributed and interacting via van der Waals forces. Their complexity and the multiscale nature yield a wide variety of electrical characteristics ranging from doped semiconductor to glassy metals depending on the crystalline quality of the nanosheets, their specific structural organization ant the operating temperature. Here, the charge transport (CT) mechanisms are studied that are occurring in GRM thin films near the metal-insulator transition (MIT) highlighting the role of defect density and local arrangement of the nanosheets. Two prototypical nanosheet types are compared, i.e., 2D reduced graphene oxide and few-layer-thick electrochemically exfoliated graphene flakes, forming thin films with comparable composition, morphology and room temperature conductivity, but different defect density and crystallinity. By investigating their structure, morphology, and the dependence of their electrical conductivity on temperature, noise and magnetic-field, a general model is developed describing the multiscale nature of CT in GRM thin films in terms of hopping among mesoscopic bricks, i.e., grains. The results suggest a general approach to describe disordered van der Waals thin films

Poly(3-hexylthiophene) Nanoparticles Containing Thiophene-S,S-dioxide: Tuning of Dimensions, Optical and Redox Properties, and Charge Separation under Illumination

We describe the preparation of poly(3-hexylthiophene-S,S-dioxide) nanoparticles using Rozen's reagent, HOF·CH3CN, either on poly(3-hexylthiophene) (P3HT) or on preformed P3HT nanoparticles (P3HT-NPs). In the latter case, core-shell nanoparticles (P3HT@PTDO-NPs) are formed, as confirmed by X-ray photoelectron spectroscopy measurements, indicating the presence of oxygen on the outer shell. The different preparation modalities lead to a fine-tuning of the chemical-physical properties of the nanoparticles. We show that absorption and photoluminescence features, electrochemical properties, size, and stability of colloidal solutions can be finely modulated by controlling the amount of oxygen present. Atomic force microscopy measurements on the nanoparticles obtained by a nanoprecipitation method from preoxidized P3HT (PTDO-NPs) display spherical morphology and dimensions down to 5 nm. Finally, Kelvin probe measurements show that the coexistence of p- and n-type charge carriers in all types of oxygenated nanoparticles makes them capable of generating and separating charge under illumination. Furthermore, in core-shell nanoparticles, the nanosegregation of the two materials, in different regions of the nanoparticles, allows a more efficient charge separation

Measurement of the conformational switching of azobenzenes from the macro- to attomolar scale in self-assembled 2D and 3D nanostructures

It is important, but challenging, to measure the (photo)induced switching of molecules in different chemical environments, from solution through thin layers to solid bulk crystals. We compare the cis-trans conformational switching of commercial azobenzene molecules in different liquid and solid environments: polar solutions, liquid polymers, 2D nanostructures and 3D crystals. We achieve this goal by using complementary techniques: optical absorption spectroscopy, femtosecond transient absorption spectroscopy, Kelvin probe force microscopy and reflectance spectroscopy, supported by density functional theory calculations. We could observe the same molecule showing fast switching in a few picoseconds, when studied as an isolated molecule in water, or slow switching in tens of minutes, when assembled in 3D crystals. It is worth noting that we could also observe switching for small ensembles of molecules (a few attomoles), representing an intermediate case between single molecules and bulk structures. This was achieved using Kelvin probe force microscopy to monitor the change of surface potential of nanometric thin 2D islands containing ca. 10(6) molecules each, self-assembled on a substrate. This approach is not limited to azobenzenes, but can be used to observe molecular switching in isolated ensembles of molecules or other nano-objects and to study synergistic molecular processes at the nanoscale

Surface Immobilized His-tagged Azurin as a Model Interface for the Investigation of Vectorial Electron Transfer in Biological Systems

A model system for the electrochemical investigation of vectorial electron transfer in biological systems was designed, assembled and characterized. Gold electrodes, functionalized with a -OCH3 terminated, aromatic self-assembled monolayer, were used as a substrate for the adsorption of variants of copper- containing, redox metalloprotein azurin. The engineered azurin bears a polyhistidine tag at its C-terminus. Thanks to the presence of the solvent exposed tag, which chelates Cu2+ ions in solution, we introduced an exogenous redox centre. The different reduction potentials of the two redox centres and their positioning with respect to the surface are such that electron transfer from the exogenous copper centre and the electrode is mediated by the native azurin active site, closely paralleling electron transfer processes in naturally occurring multicentre metalloprotein

Facile high-yield synthesis and purification of lysine-modified graphene oxide for enhanced drinking water purification

Lysine-covalently modified graphene oxide (GO-Lys) was prepared by an innovative procedure. Lysine brushes promote enhanced adsorption of bisphenol A, benzophenone-4 and carbamazepine contaminants from tap water, with a removal capacity beyond the state of the art