2,664 research outputs found
Millimeter-wave FET modeling based on a frequency extrapolation approach
An empirical distributed model, based on electromagnetic analysis and standard S-parameter measurements up to microwave frequencies, is shown to be capable of accurate small-signal predictions up to the millimeter-wave range. The frequency-extrapolation approach takes advantage from a physically-expected, smooth behavior of suitably defined elementary active devices connected to a passive distributed network. On this basis, small-signal millimeter-wave FET modeling becomes an affordable task in any laboratory equipped with a standard microwave vector network analyzer and electromagnetic simulation capabilities. In the paper, wide experimental validation of the proposed model up to 110GHz is presented for PHEMT devices with different sizes and bias conditions
A phase-locked frequency divide-by-3 optical parametric oscillator
Accurate phase-locked 3:1 division of an optical frequency was achieved, by
using a continuous-wave (cw) doubly resonant optical parametric oscillator. A
fractional frequency stability of 2*10^(-17) of the division process has been
achieved for 100s integration time. The technique developed in this work can be
generalized to the accurate phase and frequency control of any cw optical
parametric oscillator.Comment: 4 pages, 5 figures in a postscript file. To appear in a special issue
of IEEE Trans. Instr. & Meas., paper FRIA-2 presented at CPEM'2000
conference, Sydney, May 200
Global modeling approach to the design of an MMIC amplifier using Ohmic Electrode-Sharing Technology
An innovative technique for high--density, high-frequency integrated circuit design is proposed.The procedure exploits the potentialities of a global modeling approach,previously applied only at device level,enabling the circuit designer to explore flexible layout solutions imed at important reduction in chip size and cost.The new circuit design technique is presented by means of an example consisting of a wide-band amplifier,implemented with the recently proposed Ohmic Electrode-Sharing Technology (OEST).The good agreement between experimental and simulated results confirms the validity of the proposed MMIC design approach
The Contribution of Universities to Growth: Empirical Evidence for Italy
New entrepreneurial ventures may represent a viable and effective mechanism to transform academic knowledge into regional economic growth. We test this notion for the Italian provinces between 2001 and 2006. We evaluate three outputs of academic activities: teaching, research and Intellectual Property Rights (IPR) activities management. New ventures may be able to transform the mentioned outputs into improved economic performance. The findings show that the effects of academic outputs on provincial economic growth (all sectors) are appreciable when they are associated with sustained entrepreneurial activities in the province. It suggests that academic inquiry may provide new ventures with valuable commercial opportunities overseen by established companies.
A Cation-π Interaction Discriminates among Sodium Channels That Are Either Sensitive or Resistant to Tetrodotoxin Block
Voltage-gated sodium channels control the upstroke of the action potential in excitable cells of nerve and muscle tissue, making them ideal targets for exogenous toxins that aim to squelch electrical excitability. One such toxin, tetrodotoxin (TTX), blocks sodium channels with nanomolar affinity only when an aromatic Phe or Tyr residue is present at a specific location in the external vestibule of the ion-conducting pore. To test whether TTX is attracted to Tyr401 of NaV1.4 through a cation-{pi} interaction, this aromatic residue was replaced with fluorinated derivatives of Phe using in vivo nonsense suppression. Consistent with a cation-{pi} interaction, increased fluorination of Phe401, which reduces the negative electrostatic potential on the aromatic face, caused a monotonic increase in the inhibitory constant for block. Trifluorination of the aromatic ring decreased TTX affinity by ~50-fold, a reduction similar to that caused by replacement with the comparably hydrophobic residue Leu. Furthermore, we show that an energetically equivalent cation-{pi} interaction underlies both use-dependent and tonic block by TTX. Our results are supported by high level ab initio quantum mechanical calculations applied to a model of TTX binding to benzene. Our analysis suggests that the aromatic side chain faces the permeation pathway where it orients TTX optimally and interacts with permeant ions. These results are the first of their kind to show the incorporation of unnatural amino acids into a voltage-gated sodium channel and demonstrate that a cation-{pi} interaction is responsible for the obligate nature of an aromatic at this position in TTX-sensitive sodium channels
High-growth firms: introduction to the special section
High-growth firms (HGFs) have attracted considerable attention recently, as academics and policymakers have increasingly recognized the highly skewed nature of many metrics of firm performance. A small number of HGFs drives a disproportionately large amount of job creation, while the average firm has a limited impact on the economy. This article explores the reasons for this increased interest, summarizes the existing literature, and highlights the methodological considerations that constrain and bias research. This special section draws attention to the importance of HGFs for future industrial performance, explores their unusual growth trajectories and strategies, and highlights the lack of persistence of high growth. Consequently, while HGFs are important for understanding the economy and developing public policy, they are unlikely to be useful vehicles for public policy given the difficulties involved in predicting which firms will grow, the lack of persistence in high growth levels, and the complex and often indirect relationship between firm capability, high growth, and macro-economic performance
Characterization and digital restauration of XIV-XV centuries written parchments by means of non-destructive techniques. Three case studies
Parchment is the primary writing medium of the majority of documents with cultural importance. Unfortunately, this material suffers of several mechanisms of degradation that affect its chemical-physical structure and the readability of text. Due to the unique and delicate character of these objects, the use of nondestructive techniques is mandatory. In this work, three partially degraded
handwritten parchments dating back to the XIV-XV centuries were analyzed by means of X-ray fluorescence spectroscopy, µ-ATR Fourier transform infrared spectroscopy, and reflectance and UV-induced fluorescence spectroscopy. 'e elemental and molecular results provided the identification of the inks, pigments, and superficial treatments. In particular, all manuscripts have been written with iron gall inks, while the capital letters have been realized with cinnabar and azurite. Furthermore, multispectral UV fluorescence imaging and multispectral VIS-NIR imaging proved to be a good approach for the digital restoration of manuscripts that suffer from the loss of inked areas or from the presence of brown spotting. Indeed, using ultraviolet radiation and collecting the images at different spectral ranges is possible to enhance the readability of the text, while by illuminating with visible light and by collecting the images at longer wavelengths, the hiding effect of brown spots can be attenuated
Characterization and digital restauration of XIV-XV centuries written parchments by means of non-destructive techniques. Three case studies
Parchment is the primary writing medium of the majority of documents with cultural importance. Unfortunately, this material suffers of several mechanisms of degradation that affect its chemical-physical structure and the readability of text. Due to the unique and delicate character of these objects, the use of nondestructive techniques is mandatory. In this work, three partially degraded
handwritten parchments dating back to the XIV-XV centuries were analyzed by means of X-ray fluorescence spectroscopy, µ-ATR Fourier transform infrared spectroscopy, and reflectance and UV-induced fluorescence spectroscopy. 'e elemental and molecular results provided the identification of the inks, pigments, and superficial treatments. In particular, all manuscripts have been written with iron gall inks, while the capital letters have been realized with cinnabar and azurite. Furthermore, multispectral UV fluorescence imaging and multispectral VIS-NIR imaging proved to be a good approach for the digital restoration of manuscripts that suffer from the loss of inked areas or from the presence of brown spotting. Indeed, using ultraviolet radiation and collecting the images at different spectral ranges is possible to enhance the readability of the text, while by illuminating with visible light and by collecting the images at longer wavelengths, the hiding effect of brown spots can be attenuated
The Role of Scanning Electron Microscopy in Periodontal Research
During recent years a great amount of research has led to a better understanding of the etiology, pathogenesis and pattern of progression of periodontal diseases. Scanning electron microscopy (SEM) has contributed to this improvement, mainly with respect to histology of periodontal tissues, the description of the morphology and distribution of bacteria on the exposed root surface, analysis of the host-parasite interactions on the gingival pocket wall, and morphological evaluation of root treatment. This review deals with all these topics. Unusual types of SEM research are also described and discussed. Uncommon sample preparation techniques for SEM in periodontal research are described. SEM in periodontal research should be of great application in the near future. Cathodoluminescence, backscattered emission and immunolabelling techniques will be formidable tools in this field of dentistry
On-wafer I/V measurement setup for the characterization of low-frequency dispersion in electron devices
Large-signal dynamic modelling of 111-V FETs
cannot he simply based on DC i/v characteristics, when
accurate performance prediction is needed. In fact,
dispersive phenomena due to self-heating and/or traps
(surface state densities and deep level traps) must be taken
into account since they cause important deviations in the
low-frequency dynamic drain current. Thus, static drain
current characteristics should he replaced with a suitable
model which also accounts for low-frequency dispersive
effects. The research community has proposed different
modelling approaches and quite often a characterisation by
means of pulsed i/v measurement systems has been suggested
as the more appropriate for the identification of lowfrequency
drain current models. In the paper, a new largesignal
measurement setup is presented which is based on
simple low-frequency sinusoidal excitations and it is easily
reproducible with conventional general-purpose lab
instrumentation. Moreover, the proposed setup is adopted in
the paper to extract a hackgating-like model for dispersive
phenomen
- …